High power diode single-end-pumped Nd:YVO4 laser

A fiber-coupled diode-single-end-pumped Nd:YVO₄ laser with an Nd:YVO₄ crystal of 0.3 at% doping concentration and 3×3×10 mm³ dimensions was reported. 14.850 W of continuous-wave output power in an M² factor of 1.12 was obtained under pump power of 27.365 W, with an optical conversion efficiency of 60.49%, and a slope efficiency of 64.5%.     

Association Behavior of 4-Acylpyrazolone Derivative and Tertiary Amine of High Molecular Weight in Antagonistic Synergistic Extraction of Palladium

To find an effective extraction and removal method for palladium(II), which is one of the main fission products from an acidic nuclear spent fuel solution, the extraction behavior of palladium(II) from a nitric acid medium by an acidic chelating extractant, 1-phenyl-3-methyl-4-trifluoroacetylpyrazolone-5-one (HPMTP) and a tertiary amine of high molecular weight, tri-n-octylamine (TOA), has been studied by spectrophotometry. A noticeable antagonistic extraction effect was observed in the extraction system under the given conditions. To understand this phenomenon, a preliminary investigation was performed to explain the mechanism of this reaction. According to the theory of corresponding solutions (TCS), the association reaction between HPMTP and TOA is proposed in the organic phase. An associated species, HPMTP·TOA, formed through hydrogen bonding in a chloroform medium might be the main reason why an antagonistic extraction effect occurred. The association constant between HPMTP and TOA was calculated to be 2.86±0.05.     

Proton-exchanged optical waveguides fabricated by glutaric acid

In this paper, we first report that a new proton source, glutaric acid, has been used to fabricate optical waveguides in Z-cut lithium niobate crystals. The relationship was experimentally established between proton-exchanged (PE) waveguide parameters and fabrication conditions. It is shown that this new organic acid can be used to obtain deep PE waveguides in fast diffusion speed (0.275 μm²/h at 221°C) and with low loss (0.2 dB/cm). It provides an alternative approach for fabricating PE waveguides in lithium niobate substrate.     

超流研究的历史回顾

回顾了超流发现的历史，介绍了超流的一些现象、理论以及新近的研究结果。强调指出超流与超导一样是一种宏观量子现象。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶 凝胶法以磷钼酸 (MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2 催化剂 .使用ICP、XRD、TG DTA、IR、TPD MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能 .杂多钼酸盐与TiO2 通过O2 -在TiO2 表面发生了键合 .在 6 2 3K下 ,杂多阴离子仍保持原有的Keggin结构 .CO2 在Lewis酸位Ni(Ⅱ )和Lewis碱位Ni-O -Mo的桥氧协同作用下生成CO2 卧式吸附态Ni(Ⅱ )←O - (CO)← (O--Ni) .丙烯有多种吸附态在催化剂上吸附 .在 5 6 3K、1MPa和空速 15 0 0h-1的反应条件下 ,丙烯的摩尔转化率为 3.2 % ,产物MAA选择性为 95 % .     

Electron–hole recombination luminescence in LiYF4:U single crystal

Photoluminescence (PL), photostimulated luminescence (PSL), thermally stimulated luminescence (TSL) and electron paramagnetic resonance (EPR) studies were carried out on LiYF₄:U⁴⁺ and pure LiYF₄ crystals. The PL and EPR investigations have identified the presence of Eu³⁺, Tb³⁺ and Gd³⁺ ions in both of these crystals possibly due to their existence in the starting materials. The luminescence observed during afterglow, PSL and TSL revealed that emission occurs at wavelength positions 382, 413, 437 and 544 nm, which are characteristic of Tb³⁺ ions. The present investigations using PSL and TSL in combination with PL studies before and after gamma irradiation have revealed that selective energy transfer to Tb³⁺ ions occurs during electron–hole recombination processes like PSL and TSL. Even though other luminescent ions (U⁴⁺ and Eu³⁺) are present in the system and U⁴⁺/U³⁺ ions are participating in electron capture/release processes, the selective energy transfer results in Tb³⁺ ions acting as luminescence centers.     

Preparation of Phosphoric-Carboxylic Cation Exchangers from Wood Cellulose

Phosphorus-containing cellulose cation exchangers were synthesized by reaction of wood cellulose with orthophosphoric acid and the ternary polymer from glycidylmethacrylate, styrene, and maleic anhydride. The effects of the ratio of reactants, temperature, and duration of the reaction on the phosphorylation and exchange capacity of the modified cellulose material were studied.     

4英寸热氧化硅衬底上磁性隧道结的微制备

就如何在4英寸热氧化硅衬底上沉积高质量的磁性隧道结纳米多层薄膜材料和如何利用光刻方法微加工制备均匀性较好的磁性隧道结方面做了初步研究，并对磁性隧 道结的磁电性质及其工作特性进行了初步测量和讨论.利用现有的光刻设备和工艺条 件在4英寸热氧化硅衬底上直接制备出的磁性隧道结，其结电阻与面积的积 矢的绝对误差在10% 以内，隧穿磁电阻的绝对误差在7% 以内，样品的磁性隧道结性质具有较好的均匀性和一致性，可以满足研制磁随机存储器存储单元演示器件的基本要求. 关键词： 磁性隧道结 隧穿磁电阻 磁随机存储器 4英寸热氧化硅衬底