Mechanism of silicon film deposition in the RF plasma reduction of silicon tetrachloride

Plasma-chemical reduction of SiCl₄ in mixtures with H₂ and Ar has been studied by optical emission spectroscopy (OES) and laser interferometry techniques. It has been found that the Ar:H₂ ratio strongly affects the plasma composition as well as the deposition (r _D) and etch (r _E) rates of Si: H, Cl films and that the electron impact dissociation is the most important channel for the production of SiCl_x species, which are the precursors of the film growth. Chemisorption of SiCl_x and the reactive surface reaction SiCl_x+H–SiCl_(x–1)0+HCl are important steps in the deposition process. The suggested deposition model givesr _D [SiCl_x][H], in agreement with the experimental data. Etching of Si: H, Cl films occurs at high Ar: H₂ ratio when Cl atoms in the gas phase become appreciable and increases with increasing Cl concentration. The etch rate is controlled by the Cl atom chemisorption step.     

LC Determination of 4-Bromoaniline in Green Algae Chlamydomonas reinhardtii After Continuous-Flow Microextraction

In this study, the determination of 4-Bromoaniline (4-BA) in green algae Chlamydomonas reinhardtii (C. reinhardtii) was investigated by applying continuous-flow microextraction (CFME) combined with high-performance liquid chromatography (HPLC). Continuous-flow microextraction was conducted in a homemade glass chamber, i.e. the sample solution flowed through a constant volume drop of solvent in the chamber at a constant flow rate. The effects of different factors on extraction efficiencies were also investigated and these factors included the kind of extraction solvent, solvent drop volume, sample flow rate, extraction time and addition amount of salt. Under the optimum extraction conditions (extraction solvent, carbon tetrachloride; solvent drop volume, 3.5 μL; sample flow rate, 1.0 mL min⁻¹; extraction time, 10 min; no addition of salt), the calibration plot was set up by plotting peak area against a series of 4-Bromoaniline concentrations (0.01–10 μg mL⁻¹) in aqueous solution. The correlation coefficient (r) was 0.9990. The limit of detection (LOD) was 0.6 ng mL⁻¹. The precision of this method was obtained by successive five time analyses of 100-ng mL⁻¹ standard solution of 4-Bromoaniline, and the relative standard deviation (RSD) was 3.5%. The concentration factor was calculated by the ratio of peak area of the analyte obtained after and before extraction and found to be 10.6. 4-Bromoaniline residues in Chlamydomonas. reinhardtii cells and tap water samples were satisfactorily analyzed according to the method described above.     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.     

4-Hydroxy-2-quinolones. 122. 1-Hydroxy-3-oxo-5,6-dihydro-3H-pyrrolo[3,2,1-<Emphasis Type="Italic">ij</Emphasis>]-quinoline-2-carboxylic acid hetarylamides as potential antitubercular agents

An improved method is reported for the synthesis of a series of 1-hydroxy-3-oxo-5,6-dihydro-3H-pyrrolo[3,2,1-ij]quinoline-2-carboxylic acid hetarylamides. The antitubercular activity of all of the compounds prepared has been studied. The structure-biological activity dependence revealed is discussed. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1023–1033, July, 2007.     

STABILITY OF POLY（N,N＇-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE） MICROGEL DISPERSION AND ADJUSTMENT OF THE HYDROPHOBICITY IN THE MICROGELS

In the UV-Vis spectra of pure light-scattering systems, there is an exponential relationship between absorbance and wavelength （A = Kλ^-n）. Here, the exponent n is named as flocculation-coagulation parameter. In the present paper, the effects of different additives on the stability of poly（N,N＇-methylenebisacrylamide-co-4-vinylpyridine） （poly（Bis-co-4-VP）） microgel dispersion were studied in detail via this parameter. The results showed that the stability of the dispersion mainly comes from the ionization of pyridine groups, making the microgel positively charged on its surface. This was confirmed by the measurement of Zeta potential and the result of conductometric titration. The result of fluorescence analysis indicated that the hydrophobicity in the microgels is enhanced with the increase in total 4-VP unit content.     

Structural and Transport Properties of Mg1−xMnxMn2O4±δ Spinels

The synthesis and structural properties of Mg_1−xMn_2+xO₄, for 0≤x≤1 are described. Complete miscibility in the solid state exists for this system. For the material with the correct stoichiometry, i.e. MgMn₂O₄, the effect of temperature on the cation distribution was investigated= above 600°C the inversion degree (m) starts increasing. The electrical conductivity shows a small dependence on P(O₂) which is consistent with the small oxygen non-stoichiometry determined by means of thermogravimetry. The main contribution to the transport properties arises from the inversion equilibrium. Two distinct conductivity regimes, below and above the inversion threshold, can be assumed to explain the electrical conductivity and thermoelectric power results.     

Molecular modeling of cytochrome P450 3A4

The three-dimensional structure of human cytochrome P450 3A4 was modeled based on crystallographic coordinates of four bacterial P450s: P450 BM-3, P450cam, P450terp, and P450eryF. The P450 3A4 sequence was aligned to those of the known proteins using a structure-based alignment of P450 BM-3, P450cam, P450terp, and P450eryF. The coordinates of the model were then calculated using a consensus strategy, and the final structure was optimized in the presence of water. The P450 3A4 model resembles P450 BM-3 the most, but the B helix is similar to that of P450eryF, which leads to an enlarged active site when compared with P450 BM-3, P450cam, and P450terp. The 3A4 residues equivalent to known substrate contact residues of the bacterial proteins and key residues of rat P450 2B1 are located in the active site or the substrate access channel. Docking of progesterone into the P450 3A4 model demonstrated that the substrate bound in a 6-orientation can interact with a number of active site residues, such as 114, 119, 301, 304, 305, 309, 370, 373, and 479, through hydrophobic interactions. The active site of the enzyme can also accommodate erythromycin, which, in addition to the residues listed for progesterone, also contacts residues 101, 104, 105, 214, 215, 217, 218, 374, and 478. The majority of 3A4 residues which interact with progesterone and/or erythromycin possess their equivalents in key residues of P450 2B enzymes, except for residues 297, 480 and 482, which do not contact either substrate in P450 3A4. The results from docking of progesterone and erythromycin into the enzyme model make it possible to pinpoint residues which may be important for 3A4 function and to target them for site-directed mutagenesis.     

The crystal structures of two Mercury Perrhenates

The mercury perrhenates with the empirical formulas HgReO₄ and Hg₂ReO₅ were prepared by annealing powdered mixtures of mercury(II)oxide and mercury(II)metaperrhenate Hg(ReO₄)₂ in sealed silica tubes. Their crystal structures were determined from single-crystal X-ray data. HgReO₄ crystallizes dimeric with nearly linear O₃Re? O? Hg? Hg? O? ReO₃ molecular units and Hg₂ReO₅ has a solid state structure, where Hg(I) and Hg(II) together with oxygen atoms form 14-membered rings, which are condensed to two-dimensionally infinite polycationic nets of composition (Hg₂²⁺ · 2 HgO)_n. These nets are separated from each other by tetrahedral ReO₄^? anions.     

Strukturen aus AIB2− und BaAl4−analogen Einheiten. I Die Verbindungen Sr4Pd5P5 und Sr2Pd3P3

Structures with AIB₂? and BaAl₄?type Units. I The Compounds Sr₄Pd₅P₅ and Sr₂Pd₃P₃ Sr₄Pd₅P₅ (Cmcm, a = 4.177(1) Å, b = 31.377(5) Å, c = 8.581(2) Å, Z = 4) und Sr₂ Pd₃P₃(Pmmm, a = 4.199(1) Å, b = 4.212(1) Å, c = 34.227(4) Å, Z = 4) have been prepared by heating the elements. Both structures contain exclusively units characteristic for the AIB_2? and BaAl₄?type. The ratio between isolated P-atoms and P₂?pairs is interpreted with an ionic splitting of the formulas.     

2-[6-Alkyl-3-hetaryl-4-oxo-9,10-dihydro-4H,8H-chromeno-[8,7-<Emphasis Type="Italic">e</Emphasis>][1,3]oxazin-9-yl]acetic acids

The interaction has been studied of a series of substituted 3-hetaryl-7-hydroxychromones with amino acids and formaldehyde (reactants ratio 1: 1: 2 respectively). In the case of glycine and Het = 3-isoxazolyl the product of aminomethylation at position 8 of the chromone was obtained, and with other Het (including Het = 4-phenyl-1,2,4-triazol-3-yl) 2-[6-alkyl-3-hetaryl-4-oxo-9,10-dihydro-4H,8H-chromeno[8,7-e][1,3]-oxazin-9-yl]acetic acids were formed. With β-alanine and Het = 4-phenyl-1,2,4-triazol-3-yl the corresponding β-substituted propionic acid was synthesized, but proline did not participate in the reaction, leading to bis(6-ethyl-3-hetaryl-7-hydroxychromon-8-yl)methane. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 683–689, May, 2007.