二极管泵浦1064nm单频Nd:YVO4激光器的研究

报道了一种用国产激光二极管泵浦的1064nm单频NdYVO4红外激光器的设计.利用布氏片和石英晶体组合构成的双折射滤光片技术,在泵浦功率为800mW时,实现了功率为360mW的1064nm红外单频输出.测量结果表明,偏振比超过了10001,功率稳定性优于0.5%,振幅噪声小于0.1%.     

Investigation of chemical decomposition of CCl4 on TiO2 near room temperature

Dissociative adsorption of CCl₄ on TiO₂ at 35 °C has been studied by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and electron spin resonance. CCl₄ decompose to form CO, CO₂, and CO₃ on the surface, at such a low temperature, in which CO₂ formation is not from CO oxidation on TiO₂, but CO₃ can be produced by CO and CO₂ adsorption. The Cl generated from CCl₄ decomposition is left on the surface and bonded to titanium ions. Mineralization of CCl₄ on TiO₂ involves the lattice oxygens. Thermodynamical driving force and possible reaction routes for CO and CO₂ formation in the CCl₄ decomposition on TiO₂ are discussed.     

直径不超过4的树的割宽

§ 1　IntroductionThe cutwidth problem for graphs,as well as a class of optimal labeling and embed-ding problems,have significant applications in VLSI designs,network communicationsand other areas (see [2 ] ) .We shall follow the graph-theoretic terminology and notation of [1 ] .Let G=(V,E)be a simple graph with vertex set V,| V| =n,and edge set E.A labeling of G is a bijec-tion f:V→ { 1 ,2 ,...,n} ,which can by regarded as an embedding of G into a path Pn.Fora given labeling f of G,th…     

Cr^4＋：YAG可饱和吸收特性测量

测量了Cr4+:YAG材料的可饱和吸收特性,用多种数据分析方法处理了实验结果,Cr4+:YAG的基态吸收截面σgs=11×10-19cm2,激发态吸收截面σes=1.2×10-19cm2。     

Cr^4＋：YAG,Cr^4＋：Mg2SiO4近红外荧光辐射温度特性研究

测量了Ｃｒ＾４＋，ＹＡＧ、Ｃｒ＾４＋，Ｍｇ２ＳｉＯ４晶体在室温和液氮温度下的荧光光谱，吸收光谱和激发态寿命，讨论了温度变化时，两种晶体中Ｃｒ＾４＋近红外辐射积分强度变化与激光发态寿命变化的关系，得出结论：在７７Ｋ￣３００Ｋ范围内，Ｃｒ＾４＋的＾３Ｔ２能级荧光辐射截面本身受温度影响不大，Ｃｒ＾４＋辐射荧光的变化，主要是由无辐射弛豫速率随温度变化而引起的。     

Charge plate technique in recoil study: Evidence for collection of recoil charged species from solid targets on metal electrodes

The occurrence of charge on recoil⁵⁶Mn produced by the (n,γ) reaction in polycrystalline potassium permanganate has been examined using the ‘charge plate technique’. From considerations of capture gamma ray decay schemes and internal conversion it appears that, in a condensed medium, the recoil atom develops charge after losing much of its initial kinetic energy which allows collection on charged electrodes. Preliminary findings were presented at the International Symposium on Radiochemistry and Radiation Chemistry, RC-41 BARC, Bombay, Feb. 4–6 (1991).     

Syntheses and characterization of 16‐arm star and star diblock copolymer and AB8 9‐miktoarm star copolymer via NMRP and ROP from dendritic multifunctional macroinitiators

A dendritic macroinitiator having 16 TEMPO‐based alkoxyamines, Star‐16 , was prepared by the reaction of a dendritic macroinitiator having eight TEMPO‐based alkoxyamines, [G‐3]‐OH , with 4,4′‐bis(chlorocarbonyl)biphenyl. The nitroxide‐mediated radical polymerization (NMRP) of styrene (St) from Star‐16 gave 16‐arm star polymers with PDI of 1.19–1.47, and NMPR of 4‐vinylpyridine from the 16‐arm star polymer gave 16‐arm star diblock copolymers with PDI of 1.30–1.43. The ring‐opening polymerization of ε‐caprolactone from [G‐3]‐OH and the subsequent NMRP of St gave AB₈ 9‐miktoarm star copolymers with PDI of 1.30–1.38. The benzyl ether linkages of the 16‐arm star polymers and the AB₈ 9‐miktoarm star copolymers were cleaved by treating with Me₃SiI, and the resultant poly(St) arms were investigated by size exclusion chromatography (SEC). The SEC results showed PDIs of 1.23–1.28 and 1.18–1.22 for the star polymers and miktoarm stars copolymers, respectively, showing that they have well‐controlled poly(St) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1159–1169, 2007.     

正丁基苝四羧酸二酰亚胺的晶型和性能研究

文章合成了N,N'-二正丁基苝四羧酸二酰亚胺,并纯化、调晶,进行了IR、元素分析、X射线等测定.分析该化合物在DMF中的紫外光谱(最大吸收波长524.80 nm)、荧光光谱(最大发射波长539.0 nm)、Stokes位移(数值15 nm)等光谱性质.在400～700 nm范围内,α晶型薄膜紫外-可见吸收出现很强的吸收峰,且由β型变为α型,最大吸收波长有明显的红移(545 nm变为580 nm).X射线粉末衍射也反映出α晶型的2θ在26.0°处衍射峰CPS为2 508,β型在25.2°为1 891.α,β晶型作为电荷产生材料制得的功能分离型有机光导体,在光源滤波波长λ=532 nm曝光下,测得含α,β感光体达到饱和电位的时间分别为46,93.98 s,光衰电位(5.3千伏电压负充电电晕,1～2 s后的表面电位)分别为727和525 V,半衰曝光量分别为4.32,4.34μJ·cm-2,残余电位分别为30和45 V等光导性能数值.     

Structural and lithium intercalation studies of Mn(0.5−x)CaxTi2(PO4)3 phases (0≤x≤0.50)

Materials from the Mn_(0.5−x)Ca_xTi₂(PO₄)₃ (0≤x≤0.50) solid solution were obtained by solid-state reaction in air at 1000 °C. Selected compositions were investigated by powder X-ray diffraction analysis, ³¹P nuclear magnetic resonance (NMR) spectroscopy and electrochemical lithium intercalation. The structure of all samples determined by Rietveld analysis is of the Nasicon type with the R space group. Mn²⁺/Ca²⁺ ions occupy only the M1 sites in the Ti₂(PO₄)₃ framework. The divalent cations are ordered in one of two M1 sites, except for the Mn_0.50Ti₂(PO₄)₃ phase, where a small departure from the ideal order is observed by XRD and ³¹P MAS NMR. The electrochemical behaviour of Mn_0.50Ti₂(PO₄)₃ and Mn_(0.5−x)Ca_xTi₂(PO₄)₃ phases was characterised in Li cells. Two Li ions can be inserted without altering the Ti₂(PO₄)₃ framework. In the 0≤y≤2 range, the OCV curves of Li//Li_yMn_0.50Ti₂(PO₄)₃ cells show two main potential plateaus at 2.90 and 2.50–2.30 V. Comparison between the OCV curves of Li//Li_(1+y)Ti₂(PO₄)₃ and Li//Li_yMn_0.50Ti₂(PO₄)₃ shows that the intercalation occurs first in the unoccupied M1 site of Mn_0.50Ti₂(PO₄)₃ at 2.90 V and then, for compositions y>0.50, at the M2 site (2.50–2.30 V voltage range). The effect of calcium substitution in Mn_0.50Ti₂(PO₄)₃ on the lithium intercalation is also discussed from a structural and kinetic viewpoint. In all systems, the lithium intercalation is associated with a redistribution of the divalent cation over all M1 sites. In the case of Mn_0.50Ti₂(PO₄)₃, the stability of Mn²⁺ either in an octahedral or tetrahedral environment facilitates cationic migration.     

枸橼酸莫沙必利的合成

分别以邻羟基对氨基苯甲醇钠，对氟苯甲醛，邻苯二甲酰亚胺为起始原料，制得3个中间体，用其中2个中间体经偶合，环化后与第3个中间体反应，再经成盐制得产品，其摩尔总收率为31．5％。