Determination of the Inclusion Constants for the Inclusion Complexes between meso-Tetrakis (4-sulfonatophenyl) Porphyrin and Cyclodextrins by Three Methods

In this paper, the interactions of meso-Tetrakis (4-sulfonatophenyl) porphyrin (TPPS 4 ) and six cyclodextrins have been studied, respectively, by fluorescence spectroscopy, polarography and thin-layer chromatography. The inclusion constants of different methods are determined and the comparison of inclusion capacity of various cyclodextrins indicates that for the ionic cyclodextrins the charge interaction plays an important role in the inclusion procedure. The thermodynamic parameters of interaction imply that the inclusion process shows the enthalpy-entropy compensation effect. Cyclodextrin, being regarded as an artificial analogue of proteinoid of heme, provides a protective sheath for porphyrin. However, the TPPS 4 , encapsulated within this saccharid-coated barrier, its solubility is enhanced prominently, which exhibits that this interaction may modify the biological properties of TPPS 4 that owned the similar properties as hematoporphyrin.     

Room Temperature Phosphorescence of 1-Bromo-4-(bromoacetyl)naphthalene Induced by Sodium Deoxycholate

Sodium deoxycholate (NaDOC) can induce 1-bromo-4-(bromoacetyl)naphthalene (BBAN) to undergo strong room temperature phosphorescence (RTP) without the removal of dissolved oxygen from the solution. RTP spectra, phosphorescence polarization and ¹³C NMR results, along with the molecular modeling calculations, supported the conclusion that BBAN molecule was combined in a sandwich with two NaDOC molecules by a “back-to-back” hydrophobic interaction arising from the apolar faces of the NaDOC molecules, which provided BBAN with a rigid enough microenvironment to produce RTP.     

A Direct Assembly Approach to the Synthesis of N,N′-Bridged Calix[4]pyrroles: The Synthesis of a 1,5-Diazacyclononatriene Locked in a Saddle Conformation

Ring closure of 1,2-bis(1-pyrrolylmethyl)benzene in the acid-catalysed condensation with acetone yields the 1,5-diazacyclononatriene [ O -C₆H₄(CH₂NC₄H₃-2)₂C(CH₃)₂] as the sole identifiable product. The twisted or saddle conformation of the 1,5-diazacyclononatriene, which was confirmed by X-ray crystal structure determination, is conformationally rigid in solution. The conformation of the 1,5-diazacyclononatriene prevents the formation of the target N,N′-bridged calix[4]pyrrole by further acid-catalysed condensation with acetone, the reaction affording unidentified oligomers/polymers instead. The acid-catalysed condensation of 1,3- and 1,4-bis(1-pyrrolylmethyl)benzene with acetone also yields unidentified oligomers/polymers.     

Synthesis and Characterization of Partially Substituted at Lower Rim Phosphorus Containing Calix(4)arenes

The synthesis and characterization of several new phosphorus-containing partially lower rim substituted derivatives of 5,11,17,23-tetra(t-butyl) calix(4)arene (I) and 5,11,17,23-tetra(t-octyl)calix(4)arene (II), namely 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(diphenylphosphinoyl-oxy) calix(4)arene (IV); 5,11,17,23-tetra(t-butyl)-25-hydroxy-26,27,28-tris(tetramethyldiamido-phosphinoyl-oxy) calix(4)arene (Vb); 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene (VI); 5,11,17,23-tetra (t-octyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene (VII) are reported. The structure of the synthesized calix(4)arene derivatives are identified and confirmed by elemental analysis, IR, ¹H, ¹³C, ³¹P{¹H} NMR spectroscopy and mass spectrometry as and X-ray crystallographic analysis of 5,11,17,23-tetra(t-butyl)-25,27-dihydroxy-26,28-bis(dimethyl-phosphinoyl-methoxy) calix(4)arene VI. According to the NMR spectra, all calix(4)arenes are in cone conformation.     

Synthesis of calix[4]arene-based dipodal receptors: Competitive solvent extraction and liquid bulk membrane transport for selective recovery of Cu2+

A series of new p-tert-butylcalix[4]arene-based dipodal receptors are synthesised in high yields. The calix[4]arene units of all the receptors have been found to be present in cone conformation. To optimise the good extraction ability and high transport rate, we synthesised the receptors that differ from each other in their end groups. These receptors extract Cu²⁺  ion selectively from the buffered aqueous medium containing a mixture of metal ions. The receptor bearing four sp³ nitrogens has by far the greater ability to extract Cu²⁺  than the other receptors. All these receptors were effectively used for Cu²⁺  ion transport from the aqueous buffered source phase to the aqueous receiving phase.

     

Synthesis, structure and α-olefin polymerization activity of group 4 metal complexes with [OSSO]-type bis(phenolate) ligands

The tetradentate [OSSO]-type bis(phenol) ligands, [{2,2′-(HOC₆H₂-4,6-R₂)₂CH₂SCH₂CH₂SCH₂}] (R = ^tBu, 2; Br, 3) react with MBz₄ (M = Zr, Hf) to yield the corresponding dibenzyl complexes, [M{2,2′-(OC₆H₂-4,6-R₂)₂CH₂SCH₂CH₂SCH₂}Bz₂] (R = Br, M = Zr, 4^Br; Hf, 5^Br; R = ^tBu, M = Hf, 5) in a good to very good yield. Zirconium diamido complexes, [Zr{2,2′-(OC₆H₂-4,6-R₂)₂CH₂SCH₂CH₂SCH₂}(NMe₂)₂] (R = ^tBu, 6; Br, 6^Br) were prepared in a reaction of the corresponding disodium salt of 2 or 3 generated in situ with ZrCl₂(NMe₂)₂(THF)₂. Heating of 6 with TMSCl at 35 °C afforded zirconium dichloro complex, [Zr{2,2′-(OC₆H₂-4,6-^tBu₂)₂CH₂SCH₂CH₂SCH₂}Cl₂] (7), whereas the titanium analog 8 was prepared in a direct reaction with TiCl₄. While for complexes 4^Br, 5, 5^Br, 6, 6^Br and 7 single C₂-symmetric isomers were observed in solution at room temperature, as revealed by the NMR spectroscopic data, titanium complex 8 formed as a mixture of cis-α (8a) and cis-β (8b) isomers in a ratio of approx. 20:80% (measured in CD₂Cl₂). The VT NMR studies revealed a reversible conversion of 8a into 8b above 60 °C. The X-ray crystal structure determination of complexes 4^Br, 5^Br and 7 confirmed their C₂-symmetrical configuration in the solid state with cis-arranged benzyl/chloro groups and the trans-coordination of two bulky phenolato moieties. The zirconium dibenzyl complexes exhibit good catalytic activities in homopolymerization of 1-hexene (atactic poly(1-hexene), PDI = 1.5-1.7) and vinylcyclohexane (isotactic poly(vinylcyclohexane), PDI = 1.2-1.8) upon activation with a co-catalyst. In both polymerizations no increase of activity was observed for the complex 4^Br with electron-withdrawing substituents on phenolate rings. Moreover, polymerization of liquid propylene catalyzed by the titanium dichloro isomeric mixture 8 afforded at 5 °C ultrahigh molecular weight atactic/isotactic polypropylene mixtures.     

Phase diagram, crystal chemistry and thermoelectric properties of compounds in the Ca-Co-Zn-O system

In the Ca-Co-Zn-O system, we have determined the tie-line relationships and the thermoelectric properties, solid solution limits, and structures of two low-dimensional cobaltite series, Ca₃(Co, Zn)₄O_9−z and Ca₃(Co,Zn)₂O_6−z at 885 °C in air. In Ca₃(Co,Zn)₄O_9−z, which has a misfit layered structure, Zn was found to substitute in the Co site to a limit of Ca₃(Co_3.8Zn_0.2)O_9−z. The compound Ca₃(Co,Zn)₂O_6−z (n=1 member of the homologous series, Ca_n+2(Co,Z_n)_n(Co,Zn)′O_3n+3−z) consists of one-dimensional parallel (Co,Zn)₂O₆⁶⁻ chains that are built from successive alternating face-sharing (Co,Zn)O₆ trigonal prisms and ‘n’ units of (Co,Zn)O₆ octahedra along the hexagonal c-axis. Zn substitutes in the Co site of Ca₃Co₂O₆ to a small amount of approximately Ca₃(Co_1.95Zn_0.05)O_6−z. In the ZnO-CoO_z system, Zn substitutes in the tetrahedral Co site of Co₃O₄ to the maximum amount of (Co_2.49Zn_0.51)O_4−z and Co substitutes in the Zn site of ZnO to (Zn_0.94Co_0.06)O. The crystal structures of (Co_2.7Zn_0.3)O_4−z, (Zn_0.94Co_0.06)O, and Ca₃(Co_1.95 Zn_0.05)O_6−z are described. Despite the Ca₃(Co, Zn)₂O_6−z series having reasonably high Seebeck coefficients and relatively low thermal conductivity, the electrical resistivity values of its members are too high to achieve high figure of merit, ZT.     

不同浓度KCl和NH4Cl溶液中H3BO3介稳区的性质

测定了H3BO3在0~25 ℃内于不同浓度KCl和NH4Cl溶液中的溶解度和超溶解度, 得到了H3BO3的介稳区宽度, 并推算出表观成核级数m, 给出了成核速率方程. 研究了KCl和NH4Cl对H3BO3介稳区性质的影响, 并对影响的机理进行了探讨. 结果表明, KCl使H3BO3介稳区向低温方向移动; NH4Cl使H3BO3介稳区向高温方向移动; 根据所得结论分析了KCl和NH4Cl在柴达木西部油田水析硼过程中的影响, 认为KCl和NH4Cl在蒸发过程中浓度的变化是造成硼分散析出而不能富集的因素之一.     

Synthesis and fluorescence sensing properties of novel pyrene-armed calix[4]arene derivatives

Fluorogenic tert-butylcalix[4]arenes bearing two pyrene pendant groups at the lower rim were synthesized. Based on ratiometric changes of monomer and excimer emissions, the pyrene amine derivative of calix[4]arene has been found to act as a selective sensor for Pb²⁺ and Cu²⁺ ions, respectively, due to a conformational change upon chelation of these ions.     

A specific and ratiometric chemosensor for Hg based on triazole coupled ortho-methoxyphenylazocalix[4]arene

Calix[4]arene 3, which contains two distal triazole groups on the lower rim and two distal o-methoxyphenylazo groups on the upper rim, was synthesized and found to be a specific and ratiometric sensor for Hg²⁺ in a polar protic solvent. A series of o-methoxyphenylazo derivatives (3, 4, 5, 7, and 9) were synthesized, which proved that the lower-rim triazoles and the hydroxyl azophenol(s) were the major ligands for metal ion binding. Though analogues 4 and 10 showed some sensitivity for Hg²⁺, compound 3 was the only ratiometric chemosensor for Hg²⁺ among the series of azocalix[4]arenes synthesized in this work. The formation of 3·Hg²⁺ complex was supported by UV/vis and NMR titration studies and Mass spectrometry. Based on the symmetrical features of NMR spectra of 3·Hg²⁺, the complex is believed to be symmetrical with respect to the calix[4]arene cavity. Furthermore, the complex was determined to be 1:1 binding stoichiometry by Job’s plot, and the association constant was determined to be 4.02×10³ M⁻¹ using Benesi-Hildebrand plot.