基于氮化碳复合材料磁性固相萃取结合高效液相色谱法测定尿液中3种羟基多环芳烃

建立了测定尿液中3种羟基多环芳烃的氮化碳复合材料磁性固相萃取结合高效液相色谱-荧光检测法。所构筑的磁性氮化碳材料，经扫描电子显微镜、X射线衍射仪、振动样品磁强计和比表面积分析仪表征后，用于尿液中3种羟基多环芳烃的富集净化。考察了吸附剂用量、吸附时间、洗脱溶液和洗脱体积（单次洗脱体积×洗脱次数）对萃取效率的影响。结合高效液相色谱-荧光分析，在0.25~250 μg/L范围内线性关系良好（相关系数r=0.999），3种羟基多环芳烃的检出限和定量限分别为0.08和0.25 μg/L，回收率为90.1%~102%，日内和日间精密度分别为1.5%~7.7%和2.2%~8.7%。该本方法简单、快速、高效，可用于尿液中羟基多环芳烃的分析。     

Isolation of lappaconitine from Aconitum septentrionale roots by adsorption

Extracts of Aconitum septentrionale Koelle roots obtained using chloroform, isopropanol, and ethanol were purified using chloroform and basic γ-Al₂O₃. Ballast materials were selectively adsorbed by γ-Al₂O₃, increasing the mass fraction of lappaconitine in the extract. The ethanol extract was purified most. The degree of lappaconitine extraction by chloroform was unaffected by the presence of γ-Al₂O₃. However, the mass fraction in the extract and lappaconitine extraction from Aconitum septentrionale were increased more than twice. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 274–276, May–June, 2006.     

Structures and electrochemical characteristics of several kinds of alloys

The structures and the electrochemical characteristics of La_0.7−x Ce_xMg_0.3Ni_2.8Co_0.5 (x = 0.1–0.5) alloy, Ti_0.25−x Zr_xV_0.35Cr_0.1Ni_0.3 (x = 0.05–0.15) alloy and AB_3<x<5-type alloy, which are the representative examples of AB₃-type alloy, solid solution alloy and non-AB₅-type alloy, respectively, have been investigated, and the performances of MH-Ni battery in which AB_3<x<5 type alloy is used as the negative electrode material are examined at relatively low temperature.     

The role of C-centered radicals on the mechanism of action of artemisinin

Artemisinin is a sesquiterpene lactone with an endoperoxide function that is essential for its antimalarial activity. Endoperoxides are supposed to act on heme leading to the reduction of the peroxide bond and production of radicals, which can be responsible for killing the parasite. The geometries of artemisinin, radical anions and neutral species generated by rearrangement after reduction of the peroxide bond were fully optimized with the AM1 and PM3 semi-empirical methods, in order to characterize the intermediates formed during the process. Among the radicals calculated along the pathway for reductive decomposition of artemisinin, the secondary radical centered on carbon C₄ has the highest stability when compared to other radicals that can be achieved either by hydrogen migration to the original O-centered radical or by homolytic break of C–C bond. This suggests that the C₄-centered radical may be the species responsible for killing the parasite, as has been indicated previously in experimental studies.     

Mercerization of primary wall cellulose and its implication for the conversion of cellulose I→cellulose II

The mercerization of homogenized primary wall cellulose extracted fromsugar beet pulp was investigated by transmission electron microscopy (TEM),X-ray diffraction together with ¹³C CP-MAS NMR, and FT-IR spectroscopy.For samples resulting from acid extraction, mercerization began at 9% NaOH, whereasfor samples purified by alkaline treatment, the mercerization started at 10%NaOH. The change in morphology when going from cellulose I to cellulose II wasspectacular, as all the microfibrillar cellulose morphology disappeared duringthe treatment. This change in morphology was very drastic as soon as the NaOHconcentrations were increased beyond 8 and 9% for the acid and alkalinepreparedsamples, respectively. On the other hand, the conversion was found to be moreprogressive in terms of increasing NaOH concentration when the transformationwas analyzed by X-ray diffraction or spectroscopy. Our observations of themercerization of isolated cellulose microfibrils are consistent with theconceptof cellulose microfibrils made of parallel chains in cellulose I and crystalsofcellulose II consisting of antiparallel chains.     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

Novel Reactions of Organomolybdenum and Organotungsten Compounds: Additive–Reductive Carbonyl Dimerization,Spontaneous Transformation of Methyl Ligands into μ-Methylene Ligands,and Selective Carbonylmethylenation

Hitherto there was no reaction known that permits transformations of R¹R²-CO → 0.5 R¹R²R³C–CR¹R²R³ in one step. This type of additive–reductive carbonyl dimerization is now possible using alkoxy(alkyl)tungsten(v) complexes with aromatic, heteroaromatic or α,β-unsaturated aldehydes and ketones. When a corresponding phenyl complex was employed in a test experiment, it was revealed that an aliphatic ketone could be used as the substrate in this reaction. A second interesting type of reaction is the transformation of CH₃ ligands into μ-CH₂ ligands, which occurs during the treatment of MeLi or Me₃Al with molybdenum or tungsten chlorides (oxidation states VI and V, for Mo additionally IV) at low temperatures with liberation of CH₄. Here, the question arises as to whether the intermediate involved has a terminal CH₂ ligand (Schrock carbene complex) or a μ-CH₃ ligand (CH₃ bound by a two-electron three-center bond to two metal atoms). Of all the μ-CH₂ complexes obtained, those which were synthesized by the action of MeLi on molybdenum chlorides can be recommended as reagents for carbonylmethylenation of aldehydes and ketones. They display high selectivity, very low basicity, a surprising resistance to protons, they are readily available, can be easily modified and, as regards their selective behavior, they have been investigated more thoroughly than other readily accessible carbonylmethylenation reagents of comparable selectivity. The results of NMR spectroscopic investigations on the structure of the μ-CH₂ complexes, and associated reaction mechanisms are discussed. A survey of carbonylmethylenation reagents, which have been reported in the literature, permits comparisons to be made with carbonylmethylenating molybdenum and tungsten complexes.     

CoMoK／γ—Al2O3水煤气变换催化剂的硫化及反硫化

以Ｈ２Ｓ和ＣＳ２作硫化剂，用ＰＰＳ和ＴＰＤＳ方法研究了水煤气变换催化剂ＣｏＭｏＫ／γ－Ａｌ２Ｏ３的硫化及反硫化过程。用Ｈ２Ｓ／Ｈ２硫化时，只发现Ｈ２Ｓ的消耗和Ｈ２Ｏ的生成，用ＣＳ２／Ｈ２硫化时，只发现Ｈ２Ｓ的消耗和Ｈ２Ｏ的生成。用ＣＳ２／Ｈ２硫化时，首先生成ＣＯ２，然后是ＣＨ４，Ｈ２Ｏ和Ｈ２Ｓ，ＴＰＧ实验表明催化剂表面上积炭，造成催化剂和活性降低，但积炭在水煤变换反应进行了逐渐除法。ＴＰＤＳ实验表     

水热合成稀土氟化物材料YLiF4∶Yb,Tm的上转换发光特性

利用水热法合成了掺杂Tm3 和Yb3 的YLiF4材料, 并研究了Tm3 和Yb3 在材料中的光吸收, 以及980 nm红外光激发下不同Tm3 浓度掺杂下的上转换发光特性. 实验发现, 在980 nm激光激发下, 材料可发出可见光. 上转换发光光谱中包括蓝光和红光. 与蓝光相比, 红光强度要弱1～2个数量级. 上转换发光强度和浓度关系研究显示, 当Tm3 浓度为0.3% (摩尔分数)时上转换发光达到最强, 大于0.3% (摩尔分数)后发光开始减弱. 通过分析输出光强与泵浦功率的双对数曲线, 发现Tm3 的蓝光发射和红光发射均属于双光子过程.     

Chromatographic effect during the preparation of γ-Al2O3 supported Cu?Mn catalysts

A strong chromatographic effect has been established during copper-managenese formate impregnation of γ-Al₂O₃. The samples obtained have been characterized by adsorption, IR, X-ray and magnetochemistry methods.