Thermal conductivity, dislocation density and GaN device design

The performance of high power transistor devices is intimately connected to the substrate thermal conductivity. In this study, the relationship between thermal conductivity and dislocation density is examined using the 3 omega technique and free standing HVPE GaN substrates. Dislocation density is measured using imaging cathodoluminescence. In a low dislocation density regime below 10⁵ cm⁻², the thermal conductivity appears to plateau out near 230 W/K m and can be altered by the presence of isotopic defects and point defects. For high dislocation densities the thermal conductivity is severely degraded due to phonon scattering from dislocations. These results are applied to the design of homoepitaxially and heteroepitaxially grown HEMT devices and the efficiency of heat extraction and the influence of lateral heat spreading on device performance are compared.     

Morphologies of microporous polyethylene and polypropylene crystallized from solution in supercritical propane

The morphologies of solvent-free, microporous, mechanically self-supporting cylinders of linear polyethylene and isotactic polypropylene, crystallized from solution in supercritical propane, were examined by an SEM technique. The morphology of gels (or foams), obtained with little or no shrinkage from 2% to 35% solutions by weight of polyethylene (99% to 85% porosities), is shown in some detail. Lamellae with very little or considerable mutual organization occur, often in the form of stacks with straight or coiled axes (axialites). Further growth of these can lead to particles with a roughly spherical overall shape and a predominantly radial orientation of the lamellae at the particle surface. Subcooled isotactic polypropylene, on the other hand, crystallizes in the form of perfectly shaped birefringent microspheres of very uniform size. ©1995 John Wiley & Sons, Inc.     

基于褐藻酸钠-纳米金复合物作非酶标记的新型电化学免疫传感器的研制

比较了用三碘甲状腺氨酸抗体(T3抗体)、褐藻酸钠(AS)标记T3抗体及褐藻酸钠-纳米金复合物(ASN)标记的T3抗体,在通过免疫反应结合到免疫电极表面后,引起的电极表面微环境发生改变的程度;用Fe(CN)3-/4-6为电化学探针,用循环伏安法获取金电极表面微环境改变的电流信息来检测 T3抗体,检测的线性范围为100～1 600ng·ml-1,检出限为45ng·ml-1.     

Preparation of AgBiVMoO/-Al2O3 Catalysts for the Partial Oxidation of Propane

A novel mixed sol method was developed for the preparation of supported catalysts. Analyses by means of XRD and BET show that a 40%AgBiVMoO/γ-Al2O3 catalyst prepared by this method possessed high specific surface area and high dispersion of the active phase. As a result, high acrylic acid selectivity of 8.5% was obtained when the catalyst was used in the reaction of propane partial oxidation to acrylic acid in a fixed-bed reactor.     

Solid state reactions of nitrogenous heterocyclic compounds(Ⅰ)——Solid state reactions of 3-methyl-l-phenyl-5-pyrazolone with carbonyl compounds

The solid state reaction of 3-methyl-1-phenyl-5-pyrazolone (MPP) with aromatic aldehydes and ke-tones benzil derivatives and imides,and the solid state Michael addition reaction of MPP with 4-arylidene-3-methyl-1-phenyl-5-pyrnzolone 2 were investigated.Some new solid state reactions between the reactants were found,from which a series of new compounds were obtained The structures of the products were identified by IR,1H NMR,MS,elemental analyses and also by X-ray crystal analysis,and the reaction mechanism of MPP with aromatic aldehydes and ketones was proposed     

A Study of Amorphous Precursors for PbZrO3-PbTiO3 Based Ceramic Materials

Amorphous precursors for PbZrO₃ and PbTiO₃ ceramics were prepared from lead acetate and the transition metaln-propoxide inn-propanol orn-butoxide inn-butanol and hydrolysed with an excess of water. According to GLC and TGA/EGA analyses, the type of alkoxide group influences distinctly the structure of heterometallic precursors, i.e., oxo or acetate bridging, and the amounts of hydroxyl and organic groups bound to the metal network. The local environments of metal atoms in the amorphous precursors were also studied by EXAFS. The analysis reveals that in Pb−Zr precursors alkoxide groups modify the coordination spheres of the zirconium atoms. Conversely, local environments of both lead and titanium atoms within the analysed range of 3.4 A depend weakly on the type of alkoxide used.     

Spectral and Thermal Studies of Rare Earth Element 3-methylglutarates

Conditions for the formation of rare earth element (Y, La–Lu) 3-methylglutarates were studied and their quantitative composition and solubilities in water at 293 K were determined (10^–2 mol dm^–3). The IR spectra of the prepared complexes with general formula Ln₂(C₆H₈O₄)₃ nH₂O (n=3–8) were recorded and their thermal decomposition in the air were investigated. During heating the hydrated 3-methylglutarates are dehydrated in one step and next anhydrous complexes decompose to oxides Ln₂O₃ with intermediate formation Ln₂O₂CO₃ (Y, La, Nd–Gd) or directly to the oxides, Ln₂O₃, CeO₂, Pr₆O₁₁ and Tb₄O₇ (Ce, Pr, Tb–Lu). This revised version was published online in August 2006 with corrections to the Cover Date.     

On-column injection onto capillary columns. Part 2: Study of sampling conditions; practical recommendations

During one year continuous use of on-column injection, the typical advantages described in our first report have fully been confirmed. In addition the analysis of large sample volumes has proved promising. Only minor modifications have been applied to the on-column injector device. Broad evidence has been gathered showing that full separation efficiency of the capillary columns after on-column injection is attained only when cold trapping or the solvent effect, as band shortening mechanisms, are working- While, under the conditions of on-column injection, cold trapping is less efficient than with other injection techniques, the opposite holds true for the solvent effect. Compared with splitless injection, the danger of excessive solvent condensation on the column is increased. A working rule is presented for establishing the optimal chromatographic conditions for handling large sample volumes while ensuring full separation efficiency yet avoiding harm to the column.     

Synthesis of thieno[3.2-<Emphasis Type="Italic">b</Emphasis>]pyrrolenine derivatives under the Fischer reaction conditions

The reaction of alkyl 4-(2-acetylhydrazino)-2-methyl-3-thiophenecarboxylates with 3-methylbutan-2-one was carried out under the Fischer reaction conditions. The influence of Lewis acids and solvents on the process was studied. A convenient method for the synthesis of thieno [3.2-b]pyrrolenine derivatives was proposed.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 725–729, March, 2005.     

The transformations of fluoroalkyl-containing 2-arylhydrazono-1,3-dicarbonyl compounds with methylamine

Fluoroalkylated 1,2,3-triketone 2-arylhydrazones and 2-arylhydrazono-3-oxo esters react variously with methylamine depending on the structure of the fluorinated substituent. 2-Arylhydrazono-1,3-dicarbonyl compounds having “short” fluoroalkyl substituents condense with methylamine at the carbonyl group attached to the non-fluorinated substituent whereas ones containing a lengthy polyfluoroalkyl substituent undergo haloformic cleavage as a result of the amine addition at the carbonyl group bearing such a substituent. The resulting 2-arylazo-3-(N-methyl)amino-1-polyfluoroket-2-en-1-ones and 1-(N-methyl)amino-2-arylhydrazono-3-fluoroalkyl-3-oxopropanamides have complexing properties, and they can bind to nickel(II) and copper(II) ions. Nickel chelates can be obtained by a three-component condensation of 2-arylhydrazono-1,3-dicarbonyl compounds and methylamine in the presence of nickel(II) cations.