Structural and lithium intercalation studies of Mn(0.5−x)CaxTi2(PO4)3 phases (0≤x≤0.50)

Materials from the Mn_(0.5−x)Ca_xTi₂(PO₄)₃ (0≤x≤0.50) solid solution were obtained by solid-state reaction in air at 1000 °C. Selected compositions were investigated by powder X-ray diffraction analysis, ³¹P nuclear magnetic resonance (NMR) spectroscopy and electrochemical lithium intercalation. The structure of all samples determined by Rietveld analysis is of the Nasicon type with the R space group. Mn²⁺/Ca²⁺ ions occupy only the M1 sites in the Ti₂(PO₄)₃ framework. The divalent cations are ordered in one of two M1 sites, except for the Mn_0.50Ti₂(PO₄)₃ phase, where a small departure from the ideal order is observed by XRD and ³¹P MAS NMR. The electrochemical behaviour of Mn_0.50Ti₂(PO₄)₃ and Mn_(0.5−x)Ca_xTi₂(PO₄)₃ phases was characterised in Li cells. Two Li ions can be inserted without altering the Ti₂(PO₄)₃ framework. In the 0≤y≤2 range, the OCV curves of Li//Li_yMn_0.50Ti₂(PO₄)₃ cells show two main potential plateaus at 2.90 and 2.50–2.30 V. Comparison between the OCV curves of Li//Li_(1+y)Ti₂(PO₄)₃ and Li//Li_yMn_0.50Ti₂(PO₄)₃ shows that the intercalation occurs first in the unoccupied M1 site of Mn_0.50Ti₂(PO₄)₃ at 2.90 V and then, for compositions y>0.50, at the M2 site (2.50–2.30 V voltage range). The effect of calcium substitution in Mn_0.50Ti₂(PO₄)₃ on the lithium intercalation is also discussed from a structural and kinetic viewpoint. In all systems, the lithium intercalation is associated with a redistribution of the divalent cation over all M1 sites. In the case of Mn_0.50Ti₂(PO₄)₃, the stability of Mn²⁺ either in an octahedral or tetrahedral environment facilitates cationic migration.     

利用莫尔条纹的准正弦特性的三维轮廓术

分析了两个矩形光栅迭合产生的莫尔条纹的光强分布特性，通过选择适当的光栅参数，可得到一个近似的正弦分划板，并把它用于三维面形测量中，实验结果表明，这种方法简单，易于自动处理，有广泛的实用价值。     

Codiameters of 3‐connected 3‐domination critical graphs

A graph G is 3‐domination critical if its domination number γ is 3 and the addition of any edge decreases γ by 1. Let G be a 3‐connected 3‐domination critical graph of order n. In this paper, we show that there is a path of length at least n?2 between any two distinct vertices in G and the lower bound is sharp. © 2002 John Wiley & Sons, Inc. J Graph Theory 39: 76–85, 2002     

Skein related links in 3-manifolds

This paper addresses two problems in the skein theory of homotopy spheres first posed by P. Traczyk. Solutions to both problems are obtained for a large class of manifolds and, since one of the basic techniques used requires the first homology group of the ambient manifold to be torsion free, the extent to which this hypothesis is actually necessary is further explored.     

水闸闸室结构三维样条边界元分析

用三维样边界元法分析水闸闸室结构。底板，闸墩和载水墙等为其子结构，交通桥，工作桥和胸墙等处理为内部支撑。地基和边载可以是任意的，只要能给定地表位移面力关系。在各种工况下，不论是设置平板门还是弧形门，是平底板是反拱底板，即使在稀疏剖分下也能给出高精度的位移场，应力场和地基反力场。     

A numerical study of an unsteady laminar flow in a doubly constricted 3D vessel

Unsteady flow dynamics in doubly constricted 3D vessels have been investigated under pulsatile flow conditions for a full cycle of period T. The coupled non‐linear partial differential equations governing the mass and momentum of a viscous incompressible fluid has been numerically analyzed by a time accurate Finite Volume Scheme in an implicit Euler time marching setting. Roe's flux difference splitting of non‐linear terms and the pseudo‐compressibility technique employed in the current numerical scheme makes it robust both in space and time. Computational experiments are carried out to assess the influence of Reynolds' number and the spacing between two mild constrictions on the pressure drop across the constrictions. The study reveals that the pressure drop across a series of mild constrictions can get physiologically critical and is also found to be sensitive both to the spacing between the constrictions and the oscillatory nature of the inflow profile. The flow separation zone on the downstream constriction is seen to detach from the diverging wall of the constriction leading to vortex shedding with 3D features earlier than that on the wall in the spacing between the two constrictions. Copyright © 2002 John Wiley & Sons, Ltd.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

Dibutyltin-3-hydroxyflavone titrates a dissociable component (cofactor) of mitochondrial ATP synthase: An energy-transfer component linked to the ubiquinone pool

Dibutyltin-3-hydroxyflavone, Bu₂Sn(of), is a new fluorescence probe inhibitor of F₁F₀-ATPase and oxidative phosphorylation which inhibits by titration of an unidentified component of F₀. Its site of action is closely related to that of the trialkyltins and of venturicidin. This F₀ component is part of a pool of this component which is present in the heart mitochondrial inner membrane at levels of 5–7 nmol (mg protein)^?1 [18 ± 3 Bu₂Sn(of) sites per mol F₁F₀-ATPase]. However, ATPase activity in submitochondrial particles is near maximally inhibited by titration of approx. three Bu₂Sn(of) sites per mol F₁F₀-ATPase. Over 60% (60–80%) of the Bu₂Sn(of) interaction sites can be lost during the purification of F₁F₀-ATPase from submitochondrial particles. The number of Bu₂Sn(of) interaction sites in various F₁F₀-ATPase preparations is variable. The high numbers of Bu₂Sn(of) sites per mol F₁F₀-ATPase for heart mitochondria (18–21) and submitochondrial particles (15–19.5) decline in ATP synthase (11–15) to the low values obtained in Complex V (7–10.5) and the minimal values observed in highly purified F₁F₀?ATPase (3.5–5.6), thus indicating a variable dissociable component or cofactor of ATP synthase. The Bu₂Sn(of) interaction site, a component of ATP synthase, is responsive to the redox status of the respiratory chain and the interaction with Bu₂Sn(of) is with the reduced form of this component. Fluorescence titration studies show that this component is in redox equilibrium with the ubiquinone pool of the respiratory chain. It is proposed that this redox component serves as an inhibitor titratable cofactor pool which cycles through an F₀ interaction site (or sites) via a system which serves as an energy-transfer link between the respiratory chain and ATP synthase.     

Reactions ofO-methyl tetramethyldiamidophosphite with halo- and thiocyanoalcohols

The reaction of O-methyl tetramethyldiamidophosphite with 3-bromopropanol or 3-bromo-2-butanol occurs with the liberation of dimethylamine and results in mixed phosphites. The reaction of O-methyl tetramethyldiamidophosphite with 3-thiocyano-2-butanol proceeds with the participation of the sulfur atom of the thiocyano group and formation ofS-(3-hydroxybutyl) tetramethyldiamidothiophosphate.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 167–169, January, 1994.