Spectrophotometric determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol complex onto microcrystalline naphthalene

A selective Spectrophotometric method has been developed for the trace determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol (PTPT) complex onto microcrystalline naphthalene. The complex is quantitatively adsorbed on naphthalene in the pH range 7.5–11.5, separated by filtration, dissolved in dimethylformamide (DMF) and determined spectrophotometrically at 400 nm. Beer's law is obeyed in the concentration range 2.5–37.5 g of copper in 10 ml of DMF. The molar absorptivity and Sandell's sensitivity are 1.30 × 10⁴1 · mol^–1 · cm^–1 and 0.0048g cm^–2, respectively. Ten replicate analyses of a solution containing 20.0 g of copper gave a mean absorbance of 0.410 with a relative standard deviation of 0.91 %. The interferences of various ions have been studied and the method has been validated by the determination of copper in various standard reference materials, beers, wines, human hair, goat liver and environmental samples.On leave from St. Stephen's College, Delhi 110 007, India     

Ion pair generation rates near planar3H and63Ni electron capture detector foils

The ion-pair generation rate (ionization topography) in plasmas from⁶³Ni and particularly Ti³H₄ foils, as used in electron capture detectors, was measured at room temperature using large, parallel plates of low backscattering ability in nitrogen gas of varying density. For one atmosphere pressure, the fall-off of ion pair formation as calculated from the exponential region equalsN ₀·e ^–0.19d for⁶³Ni andN ₀·e ^–1.4d for³H (whereN ₀ is the initial ionization rate immediately adjacent to the foil andd is the distance from the foil in mm). The experimentally measured half ranges (distances from the foil within which 50% of all possible ion pairs are created) are 2.7 mm for⁶³Ni and 0.27 mm for³H. The half ranges calculated from the exponential region where there is less interference from electron backscattering, are 3.7 and 0.5 mm, respectively. The latter values are considered closer to the true, unimpeded ionization topography near planar⁶³Ni and³H foils.Material taken from doctoral thesis     

固体超强酸催化剂SO_4~(2-)/TiO_2-WO_3的制备及其催化性能研究

制备了固体超强酸催化剂SO2 -4/TiO2 WO3 ,并以丁酸丁酯的合成作为探针反应 ,系统考察了WO3 的含量、硫酸浸渍浓度、焙烧温度等制备条件对SO2 -4/TiO2 WO3 催化活性的影响 .实验表明 :制备催化剂的适宜条件为m(H2 WO4) =12 5 % ,硫酸浸渍浓度为 1 0mol·L-1,焙烧温度为 5 80℃ ,活化时间 3h .利用优化条件下制备的催化剂SO2 -4/TiO2 WO3 催化合成缩醛 (酮 ) ,在醛 /酮与二元醇 (乙二醇 ,1,2 丙二醇 )的投料摩尔比为 1∶1 5 ,催化剂的用量占反应物总投料质量的 0 5 % ,反应时间为 1h条件下 ,2 甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 78 7% ,2 ,4 二甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 83 0 % ,环己酮 -乙二醇缩酮的收率为 85 9% ,环己酮 1,2 丙二醇缩酮的收率为 84 6% ,丁酮 -乙二醇缩酮的收率为70 7% ,丁酮 1,2 丙二醇缩酮的收率为 88 3 % ,2 丙基 1,3 二氧环戊烷的收率为 80 6% ,4 甲基 2 丙基 1,3 二氧环戊烷的收率为 79 6% ,2 异丙基 1,3 二氧环戊烷的收率为 64 2 % ,4 甲基 2 异丙基 1,3 二氧环戊烷的收率为 83 3 % ,2 苯基 1,3 二氧环戊烷的收率为 75 3 % ,4 甲基 2 苯基 1,3 二氧环戊烷的收率为 95 1% .     

Morphology Control over the Organic Nanoparticles of 1,3-Diphenyl-5-（9-anthryl）-2-pyrazoline

The organic nanoparticles of a blue-light-emitting molecule, 1,3-diphenyl-5-(9-anthryl)-2-pyrazuline, were prepared by reprecipitation method using acetonitrile as the solvent for the molecular precursor. Three morphologies, spherical, doughnut-shaped and cubic, could be observed on the silicon substrate forthe nanoparfides by the volume-controlled addition of acetonitrile. The evolution of particle morphology as a function of acetonitrile addition was attributed to the variation of the growth habits of the particles in the different environment. The nanoparticles exhibit the novel photoluminescence spectra as compared to those of monomer and the bulk crystals.     

Tautomerism and Acidic Properties of N‐Unsubstituted Benzohydroxamic Acids: Semiempirical Quantum Chemical Estimation

Tautomerism of Nunsubstituted benzohydroxamic acids and their anions in the gas phase was investigated by the semiempirical AM1 method. The possibility of estimating pK _a in aqueous solutions using calculated characteristics of molecules is demonstrated.     

Synthesis of Substituted Hydroxyspiro([1]benzopyran-2,4'(1'H)-pyrimidine)-2'(3'H)thiones and Hydroxyspiro-([1]benzopyran-2,4'(1'H)-pyrimidin)-2'(3'H)ones

We have developed a novel regioselective method for synthesis of substituted spiro([1]benzopyran-2,4'-(1'H)pyrimidine)-2'-(3'H)thiones and spiro([1]benzopyran-2,4'-(1'H)pyrimidin)-2'-(3'H)ones having one or two hydroxyl groups on the benzene ring.     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

Titanyl Acetylacetonate as an Efficient Catalyst for Regioselective 1,2‐Reduction of α,β‐Unsaturated Carbonyl Compounds and Conversion of α‐Diketones & Acyloins to Vicinal Diols with Sodium Borohydride

α,β‐Unsaturated aldehydes and ketones were reduced readily and exclusively to their corresponding allylic alcohols with NaBH₄ and catalytic amounts of titanyl acetylacetonate at room temperature. Reduction reactions were carried out in CH₃CN or THF. This reducing system was also efficient for the reduction of α‐diketones and acyloins to their corresponding vicinal diols in CH₃CN.     

The Preparation and Characterization of Highly Dispersed PdO over Alumina for Low‐temperature Combustion of Methane

PdO/Al₂O₃ catalysts prepared by glow discharge plasma treatment followed by thermal calcination show a much higher dispersion and a better catalytic activity for methane combustion at relatively low temperatures. The dispersion of palladium active species by such plasma prepared catalysts is 29.7%, 5.4 times higher than that of conventional catalysts. XPS analysis indicates that a surface enrichment of Pd active species (PdO) has been achieved after plasma treatment. The surface atomic composition of PdO of plasma prepared catalysts reaches 10.5%. XRD characterization also confirms a wellcrystallized PdO phase present on the plasma prepared catalyst. The lightoff temperature of the plasma prepared catalyst is 370°C, 50°C lower than that obtained from the conventional catalyst.