Redox behavior of V/MgO catalyst in H2S wet oxidation at room temperature

The room temperature wet catalytic oxidation was conducted in a batch reactor with V/MgO catalyst. The XRD study of the catalyst used indicated that V/MgO could not only oxidize H2S to sulfur selectively, but also prevent the sulfidation of metal oxide effectively at the room temperature. The XPS study indicated that the H2S oxidation with V/MgO could proceed by a redox mechanism (V⁵⁺↔ V⁴⁺) and that V³⁺ formation (V⁴⁺→ V³⁺), was responsible for the deactivation of V/MgO. This revised version was published online in June 2006 with corrections to the Cover Date.     

From D-glucose to biologically potent L-hexose derivatives: synthesis of alpha-L-iduronidase fluorogenic detector and the disaccharide moieties of bleomycin A2 and heparan sulfate

A novel and convenient route for the synthesis of biologically potent and rare L-hexose derivatives from D-glucose is described. Conversion of diacetone-alpha-D-glucose (14) into 1,2:3,5-di-O-isopropylidene-beta-L-idofuranose (19) was efficiently carried out in two steps. Orthogonal isopropylidene rearrangement of compound 19 led to 1,2:5,6-di-O-isopropylidene-beta-L-idofuranose (27), which underwent regioselective epimerization at the C3 position to give the L-talo- and 3-functionalized L-idofuranosyl derivatives. Hydrolysis of compound 19 under acidic conditions furnished 1,6-anhydro-beta-L-idopyranose (35) in excellent yield, which was successfully transformed into the corresponding L-allo, L-altro, L-gulo, and L-ido derivatives via regioselective benzylation, benzoylation, triflation and nucleophilic substitution as the key steps. Applications of these 1,6-anhydro-beta-L-hexopyranoses as valuable building blocks to the syntheses of 4-methylcoumarin-7-yl-alpha-L-iduronic acid and the disaccharide moieties of bleomycin A(2) as well as heparan sulfate are highlighted.     

Comparative study of catalytic activity of Pd loaded hydroxyapatite and fluoroapatite in butan-2-ol conversion and methane oxidation

Palladium loaded calcium-hydroxyapatite, Pd(z)/CaHAp, and calcium-fluoroapatite, Pd(z)/CaFAp, were synthesised and characterised by TEM, XRD, IR and UV–vis–NIR spectroscopies. Introduction of palladium does not change the structure of CaHAp and CaFAp. The average size of PdO particles was found to be around 4–5 nm on Pd(1)/CaHAp but larger (6–7 nm) on Pd(1)/CaFap. The acid–base properties of the supports and of the catalysts were studied using butan-2-ol conversion. On CaHAp and CaFAp, the butenes yield (dehydration reaction) is very low either in the absence or in the presence of oxygen. The methyl ethyl ketone yield (dehydrogenation reaction) is significant only in the presence of oxygen and higher over CaFAp. Conversely, the performances of Pd(z)/CaHAp are better than those of Pd(z)/CaFAp below 180 °C. Above 180 °C, buta-2-ol combustion is favoured on Pd/CaHAp but not on Pd/CaFAp.

In methane oxidation, Pd(z)/CaHAp showed also a much larger activity than Pd(z)/CaFAp. On 2 wt% Pd loaded CaHAp, the methane oxidation reaches a conversion of almost 100% at 350 °C, which is comparable with the performance of conventional Pd/Al₂O₃ catalysts. The reducibility of PdO under methane–oxygen mixtures is lower on Pd(z)/CaHAp. For both reactions, the lower activity of Pd(z)/CaFAp is related to its higher acidity, resulting from the substitution of OH⁻ by F⁻, and to the larger PdO particle size.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

1,3-二烯基-1,1,3,3-四甲基二硅氧烷/苯乙烯共聚合的环化率与竞聚率

对１３０℃下１，３ 二烯基 １，１，３，３ 四甲基二硅氧烷（ＤＶＤＳ）／苯乙烯（Ｓｔ）的溶液环化共聚合动力学进行了研究．根据低转化率（＜１０％）的共聚物组成及环状结构比例，通过参数估计方法，求得环化率与竞聚率，分别为ｒ１＝０１０２、ｒ２＝３４８、ｒｃ＝００２１０、Ｋｃ＝３８１ｍｏｌ／Ｌ、Ｋ′ｃ＝０３８９ｍｏｌ／Ｌ，同时得到它们９５％置信概率的联合置信区间及其交互影响的联合置信区间．表明ＤＶＤＳ的反应活性较Ｓｔ低，其非环状结构自由基具有较强的分子内环化反应能力；环的位阻效应使环状结构ＤＶＤＳ自由基的活性低于其非环状结构自由基．     

CO2部分氧化乙烷制乙烯Pd—Cu／MoO3—SiO2催化剂的研究

用化学吸附－红外光谱、化学吸附－程序升温脱附（ＴＰＤ）和微型反应技术研究了Ｐｄ－Ｃｕ／ＭｏＯ３－ＳｉＯ２（ＭｏＳＯ）催化剂对ＣＯ２和乙烷的吸附活化和部分氧化反应性能．结果表明，乙烷以Ｃ—Ｈ键中的Ｈ吸附于ＭｏＳＯ载体表面ＭｏＯ键的端基氧上；Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂对ＣＯ２有良好的化学吸附活化性能，ＣＯ２的吸附除有线式吸附态和剪式吸附态外，还有一种新的卧式吸附态；Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂的晶格氧参与了化学反应．探讨了在Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂上ＣＯ２的部分氧化乙烷反应机理     

CuO／CeO2和CuO／Al2O3催化剂的催化性能

本文以ＣＯ氧化为模式反应考察了ＣｅＯ２和Ａｌ２Ｏ３负载氧化铜催化剂的氧化活性，运用ＸＲＤ和ＴＰＲ技术研究了催化剂的还原性能和物相结构，结果表明：载体性质对负载ＣｕＯ催化剂的ＣＯ氧化活性有很大影响，ＣｕＯ／ＣｅＯ２催化剂活性明显高于ＣｕＯ／Ａｌ２Ｏ３催化剂．催化剂的还原特性随载体不同而不同．同时发现，热处理对催化剂铜物种的存在形式，晶粒大小、还原特性及其催化活性有明显影响，ＣｕＯ／Ａｌ２Ｏ３催化剂活性下降的主要因素是生成了活性较低的ＣｕＡｌ２Ｏ４相，而ＣｕＯ／ＣｅＯ２催化剂活性下降是由于ＣｕＯ和ＣｅＯ２发生烧结，晶粒变大     

Thermodynamics of complexation of lanthanides and some of transition metal ions by 5,5-dimethyl-cyclohexane-2-(2-hydroxyphenyl)-hydrazono-1,3-dione (DCPHD) and its derivatives

Summary Equilibrium betweenDCPHD,DC-4-Cl-PHD, andDC-4-Me-PHD and protons, transition, and lanthanide ions have been investigated at 30 °C by means of potentiometric titration in 75% (v/v) methanol-water mixture containing 0.10M KNO₃ as a constant ionic medium. Thermodynamic parameters (G, H and S) referring to the formation of species HL ^–,L ^––,ML ^+n–2 andML ₂ ^+n–4 (L ^–– denotes the ligand anion) have been determined in solutions. The solvent effects on the thermodynamic parameters of the complex formation are discussed in terms of differences in the donor ability of methanol and water solvents. The plots of thermodynamic parameters versus ionic potential (Z ²/r) of the lanthanide elements is not linear as expected from ionic theory. The obtained curve can be resolved in an initial group (the lighter lanthanides), an intermediate group (Sm-Dy), and a final group (the heavier ones, Tb-Lu). This behavior was explained in terms of differences in the dehydration of lighter lanthanide(III) from that of heavier ones.

---

Thermodynamik der Komplexierung von Lanthaniden und einigen Übergangsmetall-Ionen mit 5,5-Dimethylcyclohexyl-2-(2-hydroxyphenyl)-hydrazono-1,3-dion (DCPHD) und seinen Derivaten

Zusammenfassung Die Gleichgewichte zwischenDCPHD,DC-4-Cl-PHD undDC-4-Me-PHD mit Protonen, Übergangsmetall- und Lanthaniden-Ionen wurden bei 30 °C mittels potentiometrischer Titration in 75% (v/v) Methanol-Wasser mit einem Gehalt an 0.10M KNO₃ als konstantem ionischem Medium untersucht. Die thermodynamischen Parameter G, H und S zur Bildung der Spezies HL ^–,L ^––,ML ^+n–2 undML ₂ ^+n–4 (L ^–– steht für das Ligandenanion) wurden in Lösung bestimmt. Die Lösungsmitteleffekte auf diese Komplexbildungsparameter werden auf Basis der Differenz im Donorvermögen von Methanol und Wasser als Solventien diskutiert. Die Diagramme der thermodynamischen Parameter gegen die ionischen Potentiale (Z ²/r) der Lanthaniden sind, wie nach der Ionentheorie zu erwarten, nicht linear. Die erhaltene Kurve läßt eine Anfangsgruppe (die leichteren Lanthaniden), eine mittlere Gruppe (Sm-Dy) und eine Endgruppe (die schwereren Lanthaniden. Tb-Lu) erkennen. Dieses Verhalten kann aus dem Unterschied im Dehydratationsverhalten erklärt werden.

     

On the ternary B 2-phase in the Al-Co-Ga system

Summary Lattice parameter values were determined for the ternary B 2-phase in the Al-Co-Ga system, and it was found that a continuous solid solution exists between -AlCo and -CoGa. Phase boundaries of the ternary phase at 1 100 K were derived from the variation of the lattice parameter with composition.

---

Über die ternäre B 2-Phase im System Al-Co-Ga

Zusammenfassung Im Bereich der ternären B 2-Phase im System Al-Co-Ga wurden die Werte des Gitterparameters bestimmt; es stellte sich heraus, daß eine durchgehende feste Lösung zwischen -AlCo und -CoGa besteht. Die Phasengrenzen der ternären Phase bei 1 100 K wurden aus der Änderung des Gitterparameters mit der Zusammensetzung abgeleitet.

     

New coordination catalysts based on rare earth compounds for polymerization of 1-octene

The study of rare earth coordination catalysts for polymerization of 1-octene has been successfully carried out for the first time. Some features and kinetic behavior of polymerization of 1-octene by Nd(naph)₃–AIEt₃ catalyst system in tetrachloro-methane are described. The overall polymerization activation energy E_a measured was 74.5 kJ/mol and the rate equation could be expressed as R_p = k_p [Nd] [M] (k_p = 3.21 × 10^?3 L/mol s, at 50°C). The catalytic activity of various rare earth elements in Ln (naph)₃ and ligands in NdL₃ for the polymerization was compared. A 1-octene oligomer with double bonds was obtained. It is either a white or pale yellow waxy semi-solid. Its number-average molecular weight is about 10³ and the molecular weight distribution is less than 2.