基于同步辐射加速器的康普顿背散射γ射线源(Ⅰ)产生MeV量级γ光子的数值计算

提出在筹建的上海同步辐射装置上建造一条MeV量级γ射线束及应用站,采用μm波长的红外(或远红外)激光与储存环中3.5GeV电子束进行康普顿背散射,从而获得能区为1—25MeV的康普顿背散射γ光子束,该光子束具有高强度、高极化度(线和圆极化)、准单色、方向性好的优点,可以广泛地应用于核物理和核天体物理基础研究及相关的应用研究领域.介绍了康普顿背散射的基本原理,并结合储存环参数给出了光子束性能的数值计算结果.     

NO-2-I-体系双波长紫外分光光度法测定痕量亚硝酸根

在稀盐酸介质中,亚硝酸根氧化碘化钾的反应产物I-3在288nm和352nm处有两个强吸收峰.基于此建立了双波长紫外分光光度法测定痕量NO-2的新方法.该法简便、快速、选择性好,线性范围为0-0.4μg/mL,检出限为3.4×10-9g/mL.用于河水、井水、矿泉水中亚硝酸根的测定,结果令人满意.     

Eu2O3纳米晶谱带特征及光伏性质的研究

利用表面光电压谱技术对不同粒径的Eu2O3纳米晶进行光吸收特性的研究，并结合紫外－可见反射吸收光谱对其谱带进行解析，实验发现，随着样品粒径的变小，部分f→f跃迁的吸收带明显增加强并发生红移；在300－500nm区间有一个宽吸收边带，此带可归属于O2p→Eu4f的电荷转移跃迁。     

铕(Ⅲ)-2-(5-溴-2-吡啶偶氮)-5-二乙氨基苯酚-溴化十六烷基三甲铵显色反应的研究

研究了铕 ( ) - 5 - Br- PADAP- CTMAB体系的显色反应和光度性质 ,并探讨了其最佳的光度分析条件。在 p H =5 .0的 HAc- Na Ac缓冲溶液中 ,有表面活性剂 CTMAB存在的条件下 ,Eu( )与 5 - Br-PADAP形成了配位比为 1∶ 2的深红色络合物。配合物的最大吸收峰位于 5 98nm,表观摩尔吸光系数为1.5 9× 10 5L· mol-1· cm-1,铕含量在 0— 10μg/ 2 5 m L范围内符合比耳定律。加标回收实验结果令人满意。     

新生MnO2对酸性媒介黑T的吸附

以化学法合成的新生MnO2为吸附剂，对水中酸性媒介黑T（染料之一）进行了吸附脱色研究，并探讨了影响吸附的因素。结果表明，酸性媒介黑T的脱色率达95%。且PH是影响染料脱色的主要因素。     

C1催化剂MoS2/K2CO3/TiO2的制备

根据“盐类及氧化物等在高比表面载体上有自发分散倾向”的原理，制备了一种新型的用于由合成气（H2／CO）合成甲醇的催化剂MoS2/K2CO3/TiO2(DSA),该催化剂具有较好的耐硫性和对甲醇有较高的选择性。     

N_2和O_2纯转动拉曼光谱(PRRS)的温度特性

计算了N2 和O2 的PRRS ,讨论了其温度特性。提出通过测量N2 和O2 的PRRS计算大气温度的方法。     

Crystal Phases of TiO2 Ultrafine Particles Prepared by Laser Ablation of Solid Rods

Titanium dioxide ultrafine particles (UFPs) are produced by pulsed laser ablation of titanium or titanium dioxide (anatase and rutile) rods in an atmosphere of He or O₂/He mixture. The collected UFPs on cellulose membrane filters at the exit of the ablation chamber are analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The TiO₂ particles produced are composed of very small particles (diameter: 10–50nm) that are completely anatase, irrespective of the rod material, and relatively large particles (diameter: 100nm–1m) that are a mixture of anatase and rutile. The large particles consist of the direct strip-off fragments coming from the rod surface. The particles obtained from the laser ablation on TiO₂ rods in an atmosphere of He contains gray particles that are supposed to be amorphous TiO₂ (x < 2). In the presence of O₂ in the ablation chamber, these oxygen defects in amorphous TiO₂ are stabilized and anatase UFPs are formed. These results suggest that the crystal phase of the products can be controlled by adjusting the rod material and the gases used in the ablation process.     

Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Fe–Mn–Al–C Alloys: a Study of Their Corrosion Behaviour in SO2 Environments

The corrosion reaction of four Fe–Mn–Al alloys exposed to a cycling, dry–humid, SO₂ (0.001% by volume) polluted atmosphere was studied. ICEMS, XPS, AES-SAM and transmission Mössbauer spectroscopy at different temperatures were employed to characterize the corrosion products. The analytical results indicate that (i) ferrihydrite is the main component of the rust; (ii) there is an abundant presence of Mn²⁺ and SO₃ ^2–/SO₄ ^2– on the top of the corrosion layer, the concentration of SO₄ ^2– increasing with the number of cycles; and (iii) the magnetic hyperfine pattern exhibited by the series of low-temperature spectra of the rust is quite different from that observed in the rust formed under similar corrosive environments on iron and weathering steel. This latter finding is correlated with a slow rate of transformation of the Fe³⁺ species formed at the early stages of corrosion into -FeOOH, the usual final product of this type of corrosion processes. The sulphate anions, abundant inside the electrolyte during the wet periods, could be incorporated to the ferrihydrite structure being responsible for the Mössbauer spectral pattern recorded from the corrosion products at low temperatures.