电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

Water/Oil Biphasic Hydroformylation of Higher Olefins over a TPPTS-Rh/SiO2 Catalyst

A novel TPPTS-Rh/SiO2 catalyst, prepared by directly modifying a heterogeneous highsurface-area Rh/SiO2 catalyst with water-soluble TPPTS ligands, could decrease the resistance of mass transfer in water/oil biphasic media for the hydroformylation of higher olefins. The catalytic performance for hydroformylation on this biphasic TPPTS-Rh/SiO2 catalyst system was higher than those of the traditional biphasic HRhCO(TPPTS)3 systems, owing to the chemical bonds between the highly dispersed Rh metal particles and the TPPTS ligands. The catalyst system is applicable for hydroformylation of higher olefins such as 1-dodecene.     

Catalytic Para‐Xylene Maximization. V. Toluene Methylation with Methanol and Disproportionation of Toluene Using Pt/ZSM‐5 and Pt/Mordenite Catalysts

Toluene was methylated with methanol and disproportionated using catalysts containing different Pt contents (0.2, 0.4 and 0.6%) supported on H‐ZSM‐5 or H‐mordenite (H‐M) zeolites in a fixed‐bed flow‐reactor operated atmospherically at temperatures of 300–500 °C in a flow of hydrogen. Platinum dispersion in the zeolite supports and acid sites strength distribution were evaluated using hydrogen chemisorption (1:1 stoichiometry) and ammonia temperature programmed desorption (TPD) in a differential scanning calorimeter (DSC). Toluene methylation was much faster on all catalysts than toluene disproportionation (DISP). Both reactions were more accelerated using H‐ZSM‐5 containing catalysts than H‐M containing catalysts. The yield of xylenes, and in particular para‐xylene, was significantly influenced by the yield of trimethylbenzenes (TMBs) in product. The selectivities for para‐, ortho‐ and meta‐xylenes production were found largely dependent on the Pt content in the catalysts, particularly when supported on H‐ZSM5‐zeolite. However, using Pt/H‐M catalysts, these selectivities were not strictly controlled by Pt content in the catalysts.     

Highly regio- and stereocontrolled SN2′ reactions of gem-difluorinated vinyloxiranes with monoalkylcopper reagents

Reaction of gem-difluorinated vinyloxiranes with RCu(X)Li allowed us to introduce the R group regioselectively at the fluorine-attached terminal carbon atom in an S_N2′ manner to afford (E)-allylic alcohols exclusively, while homoallylic alcohols with anti stereochemical relationship were found to be obtained selectively from higher-ordered cuprates derived from CuCl and RMgBr in a ratio of 1:3.     

纳米Sb2O3的制备与性能研究

由于Sb2O3是一种性能优良的无机阻燃剂,并与卤素阻燃剂有很好的协效作用[1],1998年,全球用于阻燃的Sb2O3达80kt以上,占阻燃剂总耗量的7%[2]。但由于其本身的极性特点,加入到纤维、塑料等高分子材料中,材料的力学性能受到很大损失[3],因此对传统的微米级的Sb2O3进行超细、表面处     

Eu3+掺杂的Sr2CeO4荧光材料的燃烧法合成及其性能研究

以尿素作燃料,Sr,Ce和Eu的硝酸盐作反应物,采用燃烧法得到了稀土Eu3 掺杂的Sr2CeO4前驱体粉末.将前驱体在一定温度下烧结3 h,合成了红色荧光材料.经过对材料进行X射线衍射(XRD)分析,确定了烧结温度在1050～1200℃时,能够得到纯度较高的产品.用扫描电镜(SEM)观察到样品烧结后的形貌为不规则的椭圆形,粒径范围在1～3 μm之间.样品的发射光谱和激发光谱表明,Eu3 在Sr2CeO4基质中有很高的猝灭浓度(10%,摩尔分数),随着Eu3 掺杂浓度的增加,可以使蓝白光调整到红白光,进而到红光.     

TiO2一维纳米材料及其纳米结构的合成

本文对合成TiO₂一维纳米材料及其有序纳米阵列的阳极氧化法、模板法以及水热法进行了全面而系统的评述，着重介绍了它们的最新研究进展。阳极氧化法能制备牢固负载于基体上的TiO₂纳米管阵列，这有助于构筑TiO₂纳米结构及其在纳米器件上的应用；与多种制备技术如溶胶－凝胶工艺、电化学沉积以及原子层沉积等相结合，模板法可以合成出多种形貌的TiO₂纳米材料如纳米管、纳米线和纳米棒，并可以通过改变所用模板的微观尺寸来调控TiO₂一维纳米材料及其有序阵列的微结构参数；水热合成法可以制备出直径小且比表面积大的TiO2纳米管粉末。但从目前看来，该法还不能制备出牢固负载于基体上的有序纳米阵列。文章最后指出了TiO₂一维纳米材料及其有序纳米阵列合成中存在的问题及今后发展方向。     

氧氟沙星荷移络合物的荧光特性和应用

研究了电子受体氯冉酸(CL)和2,3 二氰5,6 二氯1,4 对苯醌(DDQ)与电子给体氧氟沙星之间的荷移反应。实验发现,氧氟沙星与以上两种电子受体在氯仿中可生成稳定的n π络合物,其荧光强度较之氧氟沙星分别增强了22和54倍。据此建立了两种基于荷移反应简便可靠地测定氧氟沙星的荧光光谱新方法。CL法和DDQ法测定氧氟沙星的质量浓度分别为0 06～2.4μg/mL和0 16～2.0μg/mL时,荧光强度与质量浓度呈良好的线性关系。该方法已用于药物制剂中氧氟沙星的测定,其回收率分别为98.4%～100.9%和98.5%～100.4%。     

多硫二硫醇烯配合物[Ni(C5S9)2]电磁学性能的研究

多硫 1 ,2 二硫醇烯能与过渡金属离子形成具有特殊平面共轭结构的稳定配合物 ,是构成有机导体或超导体的基本“砖块”[1,2 ] 。配合物的晶体结构研究表明 ,分子之间通过Ｓ…Ｓ原子ｐ轨道的重叠而存在的超分子相互作用是配合物具有高导电性的一个重要特征[3 ] 。增加分子间超分子相互作用的一个有效方法是增加配体上硫原子的个数。我们以Ｃ6Ｓ10 (图 1 )为中间体得到Ｃ5Ｓ2 -9(图2 ) ,与Ｎｉ2 + 离子配位后在四种不同阳离子作用下生成 (Ｃａｔ)2 [Ｎｉ(Ｃ5Ｓ9)2 ]型二价阴离子配合物。当这些配合物用Ｉ2 氧化时都生成了中性配位化合物 [Ｎｉ…     

微波辐射促进ZnCl_2与Y分子筛固相反应的研究

采用XRD、IR和原子吸收光谱等手段对微波固相法制备的ZnCl2／Y催化剂进行了表征·微波辐射促进了ZnCl2在分子筛表面分散和固态离子交换，分散的ZnCl2可与分子筛表面氧原子发生较强的配住键合作用．当ZnCl2的负载量达到37．5％时，ZnCl2仍可完全分散于NaY分子筛表面，此时的固态离子交换度为84％．随着分子筛表面酸菌和区强度的增加，ZnCl2与分子筛的固态离子交换量减少．