U-6Nb合金机加过程中的塑性变形及其消除方法

国外早在20世纪80年代初就已发现U-6Nb合金在机械加工过程中的尺寸不稳定性问题，并认为该现象可能是由于该合金所具有的高密度孪晶、低屈服应力及热弹性马氏体相变等特性共同作用的结果。结合U-6Nb合金的组织结构、机械加工工艺及热处理工艺，探讨U-6Nb合金在机械加工过程中产生塑性变形的原因并利用其具有形状记忆效应这一特性，采用200℃时效的方法探索其变形的消除方法。     

2∶17 型SmCo永磁材料的研究进展与展望

2∶17型SmCo永磁体自1977年问世以来,已有很大发展,其性能不断提高.因其具有优异的磁性能,在微波通讯技术、航空航天、国防工业、交通运输业等很多领域有着广泛的应用.最近又提出了最高工作温度大于400 ℃的永磁材料的要求,因2∶17型SmCo永磁体具有高的居里温度和较高的磁能积而成为首选材料.从1996年至今出现了2∶17型SmCo高温磁体的研究热潮,本文主要介绍了2∶17型SmCo永磁的发展过程、磁体的磁性能、制备工艺、应用情况及其发展趋势.     

Crystal Structure of (6S,9S,13R,14S)-7,8-Didehydro-3,7-dimethoxy-17-methylmorphinan-4,6-diol

1 INTRODUCTION (9S,13R,14S)-7,8-Didehydro-3,7-dimethoxy-4-hydroxy-17-methylmorphinan-6-one I is an impor- tant natural product that was used to ease pain, decrease blood pressure and diminish inflammation. In order to study the stereochemistry of the reduction of I with potassium boronhydride, the crystal structure of the title compound II was determined by X-ray diffraction method. 2 EXPERIMENTAL 2. 1 Instrument The melting point was measured on a Yanagimoto MP-500 apparatus…     

面对21世纪的挑战

面对２１世纪的挑战李远哲在过去的十年内，我曾经在不同的场合以同样的话题，发表个人对人类将来的一些看法与关怀。虽然这十年来，世局的改变非常急速，但是我基本的观点并没有改变，改变的是随着世纪转折点的来临，我们必须更坚决地下定决心，加深“迎接挑战”迫切感。...     

Dawson型磷钼钒杂多酸催化合成1,3-二噁戊烷的研究

考察了Dawson型磷钼钒杂多酸和各种结构反应底物对1，3-二噁戊烷合成催化活性的影响．研究表明：H6P2Mo17VO62的催化效果最好，反应条件温和，环氧化物的转化率接近100％，1，3-二噁戊烷的选择性在90％以上。     

刍议初中数学“预设性生成”课堂教学

早在20世纪70年代美国心理学家维特罗克在《作为生成过程的学习》一文中最早提出“生成学习”的概念；国内最早明确提出生成性教学思想的是叶澜教授，她于1997年率先提出生成性教学思想．目前，大多数研究者都认同预设和生成是辩证的对立统一体，两者是相互依存的．     

高可见光催化降解污染物和产氢活性的Z型N-掺杂K4Nb6O17/g-C3N4异质结

随着人口增长和全球工业化进程加快,人们饱受环境污染和能源短缺问题的困扰.半导体光催化技术作为一种高效、可持续、环境友好、有潜力的新技术,在环境净化和能源开发方面有着广阔的应用前景.到目前为止,人们已开发出多种半导体光催化剂,并广泛应用于污染物降解、氢气制备和二氧化碳还原等领域.其中,化合物K4Nb6O17具有典型的层状结构、合适的电子能带结构、结构易改性以及良好的电荷传输性能等特点,在光催化领域得到了广泛研究.然而,单纯K4Nb6O17仍存在光响应范围窄、光生载流子复合率高等问题,限制了K4Nb6O17的进一步应用.因此,需要对K4Nb6O17进行改性,拓宽其光吸收范围,提高其光生载流子分离效率,从而提高其光催化活性.本研究通过简单焙烧法制备Z型N-掺杂K4Nb6O17/g-C3N4(KCN)异质结光催化剂,其中石墨相氮化碳(g-C3N4)在复合材料中质量比约为50%.层状K4Nb6O17层板的电子结构通过N掺杂进行调控,拓宽其光响应范围,使其具有可见光响应;同时,形成的g-C3N4位于N-掺杂K4Nb6O17的外层以及内层空间,在这两种组分之间形成异质结,有利于提高光生载流子的分离效率.荧光光谱、时间分辨荧光光谱和光电化学测试表明,N掺杂和异质结的形成有利于增强光生电子-空穴对的传输和分离效率.通过在可见光照射下降解罗丹明B(RhB)和产氢来评估材料的光催化性能.相比g-C3N4(8.24μmol/h)和Me-K4Nb6O17(~1.30μmol/h),KCN复合材料光催化产氢效率(~16.91μmol/h)得到了极大提高,并显示出极好的光催化产氢稳定性能.对于光催化降解RhB体系,KCN复合材料也显示出较好的光催化活性和稳定性,并能很好地将RhB矿化.鉴于KCN复合材料具有较小的比表面积(9.9 m^2/g)且无孔结构,认为比表面积对光催化活性影响较小.因此,与单组分相比,KCN复合材料光催化产氢和RhB降解活性都得到了极大提高,活性的增强主要归功于N掺杂和异质结形成的协同效应,其中N掺杂可以拓宽光捕获能力,异质结形成可提高电荷载流子的分离效率.电子自旋共振(ESR)谱表明,在KCN降解RhB体系中,超氧自由基(·O2^?)、羟基自由基(·OH)和空穴(h^+)作为主要活性物质都参与了反应.结合实验结果可以推测KCN复合材料满足了Z型光催化体系,该体系具有高效的光生载流子分离效率和较高的氧化还原能力.     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.