Electro-oxidation of herbicide halosulfuron methyl on glassy carbon electrode and applications

Halosulfuron methyl, a fast-acting herbicide and is absorbed into leaf tissue within 1-2 days and translocated through the vascular system, interrupting amino acid production within the plant, can be detected using glassy carbon electrode the technique of adsorptive stripping voltammetry. The adsorptive stripping voltammetric behavior of halosulfuron methyl was investigated in pH range 1.0-10.0. Halosulfuron methyl was irreversibly oxidized at a glassy carbon electrode. Electrochemical techniques including adsorptive stripping voltammetry and cyclic voltammetry were employed to study the oxidation mechanism. The experimental parameters such as the accumulation potential, accumulation time and frequency were optimized. The linear range, detection limit and quantification for halosulfuron methyl were evaluated by adsorptive stripping voltammetry. Under the optimized conditions, the peak current is linear to halosulfuron methyl concentration in the range 4.1-50.0 μg mL⁻¹. Limit of detection and limit of quantification were 1.23 and 4.10 μg mL⁻¹, respectively. The interference of inorganic species and other some pesticides on the voltammetric response have been studied. The applicability to spiked soil and natural water was described and the recoveries for the standards added are 103.8% and 108.2%, respectively. The method is successfully applied for the determination of halosulfuron methyl in commercial formulation.     

Effect of iron and humic acid on photodegradation of some pesticides adsorbed on clay surfaces

Photochemistry studies can be helpful in assessing the environmental fate of chemicals. For this reason, the photodegradation kinetic studies of the two pesticides orthophenylphenol (OPP) and monuron, largely used in agriculture, were carried out in solid phase. The fungicide OPP and the herbicide monuron were irradiated on the clay fractions (montmorillonite and modified clays) using a suntest simulator. The phototransformation of the parent compound was followed by HPLC technique. The photodegradation process appears to follow the first order reaction. Kinetic parameters were determined and the experimental results show that the photodegradation of these substrates was enhanced in presence of K-montmorillonite, in comparison with Fe(III) exchanged montmorillonite and montmorillonite complexed with humic acid complexes. This study has shown that the iron and humic acid adsorbed on clay surfaces did not increase the degradation rate.     

Identification/quantification of multiple pesticide residues in food plants by ultra-high-performance liquid chromatography-time-of-flight mass spectrometry

In this study, the potential of ultra-high-performance liquid chromatography coupled with the time-of-flight mass spectrometry (UHPLC–TOF MS) to enable rapid and comprehensive analysis of 212 pesticide residues in QuEChERS extracts obtained from four plant matrices has been investigated. Method optimization is discussed in detail. In addition to molecular adducts, also fragment ions were provided for all target pesticides, thus obtaining at least three identification points required by European Decision 2002/657/EC was achieved. To get maximum information on analytes present in the extracts, each sample was examined within two injections, the first in a positive and the next one in a negative ionization mode. Under UHPLC conditions, both analyses were completed within 24 min. For more than 96% of pesticides involved in this study, the limit of quantification was ≤10 μg/kg. As a part of the work, strategy enabling screening of non-target pesticides and their metabolites is demonstrated on analysis of real-life samples.     

Development and characterisation of an immunoaffinity chromatographic column for the on-line determination of the pesticide triclopyr

An immunoaffinity column for the selective extraction and concentration of the herbicide triclopyr from water samples and quantification on line by HPLC has been developed. The immunoaffinity device was prepared by immobilising triclopyr antibodies to hydrazide derivatized azlactona beds. Efficient desorption of bound triclopyr was achieved with 70% ethanol/water solution. The column was evaluated regarding selectivity, recovery, capacity, saturation volume and reusability. Obtained results show that immunoaffinity chromatography (IAC) can be used for quantitative extraction, concentration and determination of triclopyr from water samples.     

气相色谱—微波等离子体发射光谱法研究农药1605与人唾液的相互作用

用ＧＣ－ＡＥＤ联用技术研究了农药１６０５，得到１６０５所含六种元素的元素色谱图，并用该方法研究了人唾液与１６０５的相互作用。     

阿维菌素纳米水分散体的制备、表征及稳定性

利用阿维菌素具有2个活性羟基的特性,设计合成了一种具有阿维菌素结构单元的阴离子型聚氨酯分散剂,采用核磁共振和红外光谱表征了其结构.利用分散剂与阿维菌素结构的相似性,将溶有阿维菌素的分散剂溶液加入水中,制备了阿维菌素的纳米水分散体.研究分散剂中羧基含量及其分子量对分散体粒径的影响,结果表明,随着羧基含量的增加,分散体粒径逐渐降低,适当控制分子量有助于改善分散剂的分散能力.透射电镜显示分散粒子具有近似球形的形貌,粒径在20~40 nm之间.纳米分散体具有较高的离心稳定性和稀释稳定性.     

低温富集液液萃取-气相色谱-串联质谱法测定水样中15种农药残留

利用低温冷冻条件下农药在水相和有机相之间达到新的传质平衡,建立了低温富集液液萃取-气相色谱-三重四极杆串联质谱法同时测定水样中15种有机磷、有机氯及菊酯类农药的方法。通过对样品前处理中的溶剂选择、冷冻温度及冷冻时间的优化,最终确定的样品前处理条件为:萃取溶剂为甲苯2.0 mL;冷冻温度-40℃;冷冻时间1h。15种农药的检出限(3S/N)在0.005~0.02μg·L-1范围,测定下限(10S/N)为0.02~0.07μg·L-1。方法用于水样中农药的分析,加标回收率在78.8%~124%之间,测定值的相对标准偏差(n=5)在0.9%~9.1%之间。     

液相色谱-串联质谱法快速测定蔬菜中19种农药残留

建立了蔬菜中19种农药残留的快速测定方法。蔬菜样品用乙腈-甲酸均质提取,经三氯甲烷液-液萃取,溶剂转换后加入甲苯作为保护剂;经N-丙基乙二胺(PSA)、石墨化碳黑(GCB)净化,液相色谱-串联质谱(LC-MS/MS)正离子源(ESI+)、多反应监测模式(MRM)测定,基质匹配标准工作曲线定量。蔬菜样品基质在50~1 000ng/mL浓度范围内线性关系良好(r20.99)。在0.01、0.02、0.04mg/kg添加浓度水平下,各农药回收率在65.4%~120.0%之间,相对标准偏差(RSD)在3.35%~17.46%之间。实验发现QuEChERS各吸附剂对极性和化学结构不同农药的吸附作用有所不同,进一步通过正交试验设计的优化,得到了一组极性有差异和化学结构不同的农药净化用吸附剂和保护剂的组合方式。     

Analytical methods for pesticide residues in rice

Rice consumption has increased worldwide over recent decades, as it has become one of the most common foods. Although the analysis of environmental samples coming from rice areas has been well documented, there is less information regarding the analysis of pesticide residues in rice-grain samples.Rice (paddy, brown and white) can be considered a complex matrix, leading to difficulties in the application of the different multiresidue methods described in the literature. This review addresses and compares the principal extraction and clean-up methodologies [e.g., liquid-liquid extraction, solid-phase extraction, pressurized-liquid extraction, QuEChERS (quick, easy, cheap, effective, rugged and safe), gel-permeation chromatography and supercritical-fluid extraction - with QuEChERS-based methods being the most frequently employed].Traditionally, the determination of pesticide residues in rice has been based on gas chromatography with mass spectrometry (MS). But the application of new classes of pesticides has driven laboratories to increase the use of liquid chromatography with tandem MS. The limits of detection and quantification are in the ranges 0.09-90 μg/kg and 1-297 μg/kg, respectively, for the methodologies reported. These values agree with the current internationally-accepted maximum residue limits (MRLs).Based on the European Union (EU) database, more than 3000 analyses of pesticide residues in rice have been performed by official EU laboratories over the past decade. Of these, 6% reported pesticide residues above the MRLs.Physico-chemical properties can explain the occurrence of pesticides in rice commodities: lipophilic pesticides are frequently found in brown rice, whereas fungicides are mainly found in milled rice. Carbendazim, malathion, iprodione, tebuconazole, quinclorac and tricyclazole are the pesticides most frequently found in white rice, while buprofezin, hexaconazole, chlorpyrifos and edifenphos are most commonly found in paddy rice.Pesticide-residue concentrations can be affected during rice processing - with concentrations generally lower in the final products. However, few studies focusing on primary processing have addressed the setting of precise values applicable for the processing factors.     

Multiresidue determination of 160 pesticides in wines employing mixed-mode dispersive-solid phase extraction and gas chromatography-tandem mass spectrometry

A new multiresidue method for the efficient screening, identification and quantification of over 160 pesticides belonging to different chemical classes in red, rose and white wines have been developed. The analysis was based on gas chromatographic-tandem quadrupole mass spectrometric determination (GC-QqQ-MS/MS). An optimization strategy involved the selection of buffering conditions and sorbents for dispersive-solid phase extraction (dispersive-SPE) in order to achieve acceptably high recoveries and reduce co-extractives in the final extracts. As a result, the optimized procedure allowed us to obtain consistent recoveries of the target pesticides including problematic ones such as captan, chlorothalonil, dichlofluanid, folpet and tolylfluanid. The attained recoveries were typically between 80 and 110% (89% on average) with RSD values typically lower than 10% (8% on average) at three spiking levels of 0.01, 0.05 and 0.2 mg kg⁻¹. Linearity was studied in the range between 0.005 and 0.2 mg kg⁻¹ using pesticide standards prepared both in pure solvent and in the presence of matrix, showing coefficients of determination (R²) higher than 0.99 for all the pesticides except for desmedipham, thiabendazole and thiamethoxam in pure solvent. The study of the ratio of the slopes obtained in solvent and in matrix provided information about the matrix effects, which was <10%, 10-20% and >20% for 33, 36 and 31% of the studied pesticides, respectively. To improve accuracy, matrix matched standards were always used for calculation of the quantification results. The expanded uncertainties were estimated by using a “top-down” approach as being 17% on average (coverage factor k = 2, confidence level 95%). Finally, the method was used with success to detect and quantify pesticide residues in commercial wines.