Determination of ziram in vegetable samples by square wave voltammetry

The electrochemical behaviour and electrode reaction mechanism of ziram （zinc-dimethyl dithiocarbamate） on a hanging mercury drop electrode were investigated in Britton-Robinson （B-R） buffer by using cyclic and square wave voltammetry （SWV）. Based on these studies a voltammetric method for determination of ziram wasdeveloped and applied to determine the ziram in synthetic and spiked vegetable samples, satisfactory results were obtained in both cases.     

Streamlining sample preparation and gas chromatography–tandem mass spectrometry analysis of multiple pesticide residues in tea

In this work, a new rapid method for the determination of 135 pesticide residues in green and black dry tea leaves and stalks employing gas chromatography coupled to tandem mass spectrometry (GC–MS/MS) with a triple quadrupole was developed and validated. A substantial simplification of sample processing prior to the quantification step was achieved: after addition of water to a homogenised sample, transfer of analytes into an acetonitrile layer was aided by the addition of inorganic salts. Bulk co-extracts, contained in the crude organic extract obtained by partition, were subsequently removed by liquid–liquid extraction using hexane with the assistance of added 20% (w/w) aqueous NaCl solution. The importance of matrix hydration prior to the extraction for achieving good recoveries was demonstrated on tea samples with incurred pesticide residues. For most of the analytes, recoveries in the acceptable range of 70–120% and repeatabilities (relative standard deviations, RSDs) ≤20% were achieved for both matrices at spiking levels of 0.01, 0.1 and 1 mg kg⁻¹. Under optimised GC–MS/MS conditions, most of the analytes gave lowest calibration level ≤0.01 mg kg⁻¹, permitting the control at the maximum residue levels (MRLs) laid down in Regulation (EC) No 396/2005. The developed method was successfully applied to the determination of pesticide residues in real tea samples.     

Determination of Pesticides in the Rhizome of Traditional Chinese Medicines by Gas Chromatography with Electron Capture Detection

A simple and efficient gas chromatography method for the determination of 27 organochlorine and pyrethroid pesticides in traditional Chinese medicine was developed. Pesticide residues were extracted from the samples by oscillation and ultrasound, and purified by gel permeation chromatography and florisil solid phase extraction. The analysis was performed by gas chromatography with micro-electron capture detection. The purification conditions, such as the extraction and elution solvents, extraction methodology, and gel permeation chromatography conditions, were optimized. Traditional Chinese medicines were purified by different methods based on their composition. Under optimized conditions, the calibration graph was linear from 10 to 500 µg/L and the correlation coefficients varied from 0.9958 to 0.9997. The detection limits of these pesticides were between 0.09 and 1.82 µg/kg. The recovery of the pesticides spiked in various samples at four concentrations ranged from 73.2% to 106.4%, with relative standard deviations between 1.0% and 14.0%. This study indicates that the method is useful for determining pesticides in rhizome traditional Chinese medicines.     

Multi-Analyte Immunoassay for Pesticides: A Review

The current trend of pesticide immunoassay is developing multi-analyte immunoassays, that is, more than one target can be detected per test. In this mini-review, the strategies to achieve multi-analyte immunoassays, which include multi-antibody strategy, broad-specificity antibody strategy, and others, are briefly introduced. In addition, the recent developments of multi-analyte immunoassays for pesticides were summarized. At last, we give a future outlook of this area, which includes rational design generic hapten with the assist of computer-assisted molecular modeling (CAMM), further improving the properties of broad-specificity antibody by recombinant antibody (rAb) technology and developing a noncompetitive immunoassay format.     

Solubility of the Pesticide Monuron in Organic Nonelectrolyte Solvents. Comparison of Observed Versus Predicted Values Based upon Mobile Order Theory

Experimental solubilities are reported at 25.0°C for monuron (also called 3-(4-chlorophenyl)-1,1-dimethyl urea) dissolved in 18 different organic nonelectrolyte solvents containing ether-, chloro-, hydroxy-, ester, methyl- and t -butyl-functional groups. Results of these measurements, combined with published literature data, are used to test the applications and limitations of expressions derived from Mobile Order theory. For the 21 nonalcoholic solvents for which predictions could be made computations show that Mobile Order theory does provide fairly reasonable estimates of the saturation mole fraction solubilities. Average absolute deviation between predicted and observed values is 48.4%. Monuron solubilities in the alcohol solvents are used to calculate stability constants for presumed solute-solvent hydrogen bonds that are believed to occur in solution.     

Degradation of imidacloprid containing wastewaters using ultrasound based treatment strategies

The present work deals with application of sonochemical reactors for the treatment of imidacloprid containing wastewaters either individually or in combination with other advanced oxidation processes. Experiments have been performed using two different configurations of sonochemical reactors viz. ultrasonic horn (20 kHz frequency and rated power of 240 W) and ultrasonic bath equipped with radially vibrating horn (25 kHz frequency and 1 kW rated power). The work also investigates the effect of addition of process intensifying agents such as H₂O₂ and CuO, which can enhance the production of free radicals in the system. The combination studies with advanced oxidation process involve the advanced Fenton process and combination of ultrasound with UV based oxidation. The extent of degradation obtained using combination of US and H₂O₂ at optimum loading of H₂O₂ was found to be 92.7% whereas 96.5% degradation of imidacloprid was achieved using the combination of US and advanced Fenton process. The process involving the combination of US, UV and H₂O₂ was found to be the best treatment approach where complete degradation of imidacloprid was obtained with 79% TOC removal. It has been established that the use of cavitation in combination with different oxidation processes can be effectively used for the treatment of imidacloprid containing wastewater.     

Multiresidue analysis of 83 pesticides and 12 dioxin-like polychlorinated biphenyls in wine by gas chromatography–time-of-flight mass spectrometry

A multiresidue method is described for simultaneous estimation of 83 pesticides and 12 dioxin-like polychlorinated biphenyls (PCBs) in red and white wines. The samples (20 mL wine, acidified with 20 mL 1% HCl) were extracted with 10 mL ethyl acetate (+20 g sodium sulphate) and cleaned by dispersive solid-phase extraction (DSPE) with anhydrous calcium chloride and Florisil successively. The final extract (5 mL) was solvent exchanged to 1 mL of cyclohexane:ethyl acetate (9:1), further cleaned by DSPE with 25 mg primary secondary amine sorbent and analyzed by gas chromatography–time-of-flight mass spectrometry (GC–TOF-MS) within 31 min run time. The limits of quantification of most analytes were ≤10–20 μg/L. Acidification of wine prior to extraction prevented hydrolysis of organophosphorous pesticides as well as dicofol, whereas treatment with CaCl₂ minimized the fatty acid co-extractives significantly. Solvent exchange to cyclohexane:ethyl acetate (9:1) further minimized the co-extractives. Recoveries at 5, 10 and 20 ng/mL were >80% for most analytes except cyprodinil, buprofezin and iprodione. The expanded uncertainties at 10 ng/mL were <20% for most analytes. Intra-laboratory precision in terms of Horwitz ratio of all the analytes was below 0.5, suggesting ruggedness of the method. Effectively, the method detection limit for most analytes was as low as up to 1 ng/mL in both red and white wine, except for cyfluthrin and cypermethrin.     

Selection of SPE cartridge for automated solid-phase extraction of pesticides from water followed by liquid chromatography-tandem mass spectrometry

In environmental analyses there is an ever-increasing need to develop simple and sensitive multi-residue methods. In many agricultural regions, there is particular concern of the potential for pesticides to enter rivers and other waterways. This study reports on the development and validation of a multi-residue method of analysis for 30 pesticides in water samples using solid-phase extraction (SPE) followed by LC-MS/MS. The electrospray and MS/MS parameters were optimised for each pesticide, including capillary voltage, collision-induced dissociation voltage, and selection of a precursor ion and two product ions. A variety of SPE sorbents were tested for sample pre-concentration, including numerous polymeric based phases. Bond Elut PPL and Oasis HLB were the only phases capable of retaining the majority of the target analyte classes in a single method. An off-line pre-concentration method using a Gilson Aspec system was optimised using the Bond Elut PPL cartridges, with a concentration factor of 25 producing limits of quantitation in the order of 6–100 ng/L. Excellent linearity (r ² > 0.9), precision (<20%) and recovery (>60%) was obtained for nearly all of the analytes, covering a wide variety of chemical and physical properties. This is the first study to fully validate Bond Elut PPL cartridges for use in multi-residue pesticide analysis.     

Extraction of pesticides in water samples using vortex-assisted liquid–liquid microextraction

A simple solvent microextraction method termed vortex-assisted liquid–liquid microextraction (VALLME) coupled with gas chromatography micro electron-capture detector (GC-μECD) has been developed and used for the pesticide residue analysis in water samples. In the VALLME method, aliquots of 30 μL toluene used as extraction solvent were directly injected into a 25 mL volumetric flask containing the water sample. The extraction solvent was dispersed into the water phase under vigorously shaking with the vortex. The parameters affecting the extraction efficiency of the proposed VALLME such as extraction solvent, vortex time, volumes of extraction solvent and salt addition were investigated. Under the optimum condition, enrichment factors (EFs) in a range of 835–1115 and limits of detection below 0.010 μg L⁻¹ were obtained for the determination of target pesticides in water. The calculated calibration curves provide high levels of linearity yielding correlation coefficients (r²) greater than 0.9958 with the concentration level ranged from 0.05 to 2.5 μg L⁻¹. Finally, the proposed method has been successfully applied to the determination of pesticides from real water samples and acceptable recoveries over the range of 72–106.3% were obtained.     

Analytical methods for estimation of organophosphorus pesticide residues in fruits and vegetables: A review

Use of pesticides has turned out to be an obligatory input to agriculture and public health. Versatile use of pesticides had resulted in contamination of all basic necessities of life, i.e. air, water and food. Among various pesticides, organophosphorus pesticides (OPPs), derivative of phosphoric acid, are the most extensively used insecticides or acaricides in many crops. Due to low persistency and high killing efficiency of OPPs, many agriculturalists regularly use this group of pesticides for various vegetables and fruits crops. The continuous use of pesticides has caused the deleterious effects to ecosystem. In response to this, a number of methods have been developed by several regulatory agencies and private laboratories and are applied routinely for the quantification and monitoring of multi pesticide residues in vegetables and crops. The present review pertains to various extraction and quantification procedures used world wide to analyze OPPs residues in various vegetables and fruits.