La1-xPrxMnO3(x=0.1,0.2)薄膜庞磁电阻性质的研究

一种新的庞磁电阻氧化物薄膜La1-xPrxMnO3(x=0.1,0.2)薄膜用脉冲激光沉积(PLD)方法生长在(100)SrTiO3单晶基底上.XRD结果显示薄膜具有很好的外延单晶取向.电输运和磁性质的研究表明薄膜具有显著的庞磁电阻效应(CMR)效应,其中磁电阻比率达95%(在5T的磁场下).X射线光电子能谱(XPS)的结果表明薄膜体系中Pr离子的价态为+4价,因此该薄膜很可能是电子掺杂的庞磁电阻体系.     

k连通图可缩边导出子图的连通性

引进S1 3边形的概念 .证明了 ,对于k(k =3或 4)连通图G ,若G无S1 3边形 ,则 是 2连通的 ;另外也得到 ,设G是k(k≥ 2 )连通图 ,若对G的任一断片F ,有｜F｜ >[k/2 ]+ 1 ,则 是 2连通的 .从而改进并推广了N .Dean的结论 .     

Flicker noise in degenerately doped Si single crystals near the metal-insulator transition

In this paper we report some of the important results of experimental investigations of the flicker noise near the metal-insulator (MI) transition in doped silicon single crystals. This is the first comprehensive work to study low-frequency noise in heavily doped Si over an extensive temperature range (2 K<T<500 K). The measurements of conductance fluctuations (flicker noise) were carried out in the frequency range 10⁻²<f<4 × 10¹ Hz in single crystalline Si across the MI transition by doping with phosphorous and boron. The magnitude of noise in heavily doped Si is much larger than that seen in lightly doped Si over the whole temperature range. The extensive temperature range covered allowed us to detect two distinct noise mechanisms. At low temperatures (T<100 K) universal conductance fluctuations (UCF) dominate and the spectral dependence of the noise is determined by dephasing the electron from defects with two-levels (TLS). At higher temperatures (T>200 K) the noise arises from activated defect dynamics. As the MI transition is approached, the 1/f spectral power, typical of the metallic regime, gets modified by the presence of discrete Lorentzians which arise from generation-recombination process which is the characteristic of a semiconductor.     

A decomposition heuristics for the container ship stowage problem

In this paper we face the problem of stowing a containership, referred to as the Master Bay Plan Problem (MBPP); this problem is difficult to solve due to its combinatorial nature and the constraints related to both the ship and the containers. We present a decomposition approach that allows us to assign a priori the bays of a containership to the set of containers to be loaded according to their final destination, such that different portions of the ship are independently considered for the stowage. Then, we find the optimal solution of each subset of bays by using a 0/1 Linear Programming model. Finally, we check the global ship stability of the overall stowage plan and look for its feasibility by using an exchange algorithm which is based on local search techniques. The validation of the proposed approach is performed with some real life test cases. This work has been developed within the research area: “The harbour as a logistic node” of the Italian Centre of Excellence on Integrated Logistics (CIELI) of the University of Genoa, Italy     

Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

A two-echelon base-stock inventory model with Poisson demand and the sequential processing of orders at the upper echelon

We consider a two-echelon inventory system with a number of non-identical, independent ‘retailers’ at the lower echelon and a single ‘supplier’ at the upper echelon. Each retailer experiences Poisson demand and operates a base stock policy with backorders. The supplier manufactures to order and holds no stock. Orders are produced, in first-come first-served sequence, with a fixed production time. The supplier therefore functions as an M/D/1 queue. We are interested in the performance characteristics (average inventory, average backorder level) at each retailer. By finding the distribution of order lead time and hence the distribution of demand during order lead time, we find the steady state inventory and backorder levels based on the assumption that order lead times are independent of demand during order lead time at a retailer. We also propose two alternative approximation procedures based on assumed forms for the order lead time distribution. Finally we provide a derivation of the steady state inventory and backorder levels which will be exact as long as there is no transportation time on orders between the supplier and retailers. A numerical comparison is made between the exact and approximate measures. We conclude by recommending an approach which is intuitive and computationally straightforward.     

Generalized double affine Hecke algebras of rank 1 and quantized del Pezzo surfaces

Let D be a simply laced Dynkin diagram of rank r whose affinization has the shape of a star (i.e., D₄,E₆,E₇,E₈). To such a diagram one can attach a group G whose generators correspond to the legs of the affinization, have orders equal to the leg lengths plus 1, and the product of the generators is 1. The group G is then a 2-dimensional crystallographic group: G=Z??Z², where ? is 2, 3, 4, and 6, respectively. In this paper, we define a flat deformation H(t,q) of the group algebra C[G] of this group, by replacing the relations saying that the generators have prescribed orders by their deformations, saying that the generators satisfy monic polynomial equations of these orders with arbitrary roots (which are deformation parameters). The algebra H(t,q) for D₄ is the Cherednik algebra of type C^∨C₁, which was studied by Noumi, Sahi, and Stokman, and controls Askey-Wilson polynomials. We prove that H(t,q) is the universal deformation of the twisted group algebra of G, and that this deformation is compatible with certain filtrations on C[G]. We also show that if q is a root of unity, then for generic t the algebra H(t,q) is an Azumaya algebra, and its center is the function algebra on an affine del Pezzo surface. For generic q, the spherical subalgebra eH(t,q)e provides a quantization of such surfaces. We also discuss connections of H(t,q) with preprojective algebras and Painlevé VI.     

Nitroxide‐mediated radical polymerization of 2‐(dimethylamino)ethyl acrylate and its sequential block copolymerization with styrene and N‐butyl acrylate

Nitroxide‐mediated radical polymerization (NMRP) of 2‐(dimethylamino)ethyl acrylate (DMAEA) was carried out at 100–120 °C, initiated by MONAMS, an alkoxyamine based on N‐tert‐butyl‐N‐(1‐diethyl phosphono‐2,2‐dimethylpropyl)nitroxide, SG1. Controlled polymerization can be achieved by the addition of free SG1 (the initial molar ratio of SG1 to MONAMS ranged from 0.06 to 0.12), giving a linear first‐order kinetic plot up to 55–70% conversion depending on the reaction conditions. The molecular weights show a near linear increase with conversion; however, they deviate to some extent with theoretical values. SG1‐mediated polymerization of DMAEA at 112 °C is also controlled in organic solvents (N,N‐dimethylformide, anisole, xylene). Polymerization rate increases with increasing solvent polarity. Chain transfer to polymer produces ～1 mol % branches in bulk and 1.2–1.9 mol % in organic solvents, typical of those for acrylates. From poly(styrene) (pS) and poly(n‐butyl acrylate) (pBA) macroinitiators, amphiphilic di‐ and triblock copolymers p(S‐b‐DMAEA), p(DMAEA‐b‐S‐b‐DMAEA), p(BA‐b‐DMAEA), and p(DMAEA‐b‐BA‐b‐DMAEA) were synthesized via NMRP at 110 °C. Polymers were characterized by GPC, NMR, surface tension measurements, and DSC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 414–426, 2006     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006