6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

钇对金属陶瓷力学性能和组织的影响

研究了添加钇对Ｔｉ（Ｃ，Ｎ）基金属瓷力学性能和组织的影响。结果表明，加入适量的钇能提高Ｔｉ（Ｃ，Ｎ）基金属陶瓷的抗变强度和硬度，其原因是由于钇与杂质硫起反应在化合物，净化了陶瓷相－金属相，陶瓷相－陶瓷相界面提高子界面结合强度     

铕掺杂BaPbO3的EXAFS研究

采用扩展Ｘ射线吸收精细结构方法，研究了铕掺杂ＢａＰｂＯ３多晶粉末中Ｅｕ，Ｐｂ两种原子的近邻结构。Ｅｕ的掺杂，导致八面体中金属Ｐｇ，Ｅｕ的配位数降低。     

Dependence of Performance of Organic Light-emitting Devices on Sheet Resistance of Indium-tin-oxide Anodes

IntroductionIndium-tin-oxide(ITO) has been widely used asthe anode material in organic light-emitting devices(OLEDs) because of its high transmittance in the visi-ble region and low electrical resistivity. In the pastyears, many investigations focused on …     

新型陶瓷材料的光激励发光性质研究

针对以往电子俘获光存储材料存在的问题，利用高温固相反应发制备了一种Eu^2 掺杂的氟氧化物玻璃陶瓷，研究表明在该材料中具有光激励发光(PSL)特性，并可用于电子俘获光存储。XRD分析表明该材料含有大量的BaF2微晶。根据其与BaF2相似的发光特性，推断玻璃陶瓷的PSL有可能来源于微晶中Eu^2 的5d-4f发射。但是决定光激励发光过程中的电子(空穴)陷阱的存在方式、电子迁移途径都有待进一步探讨的问题。与传统的BaFCl：Eu相比，这种材料的光激励发光衰减速度较慢。     

p—Si上电沉积Ni—W—P薄膜的结构与热稳定性

研究了ｐ－Ｓｉ上恒电流沉积Ｎｉ－Ｗ－Ｐ合金薄膜组成与结构的关系，讨论了镀层的组成、结构随沉积时间的变化．测定了非晶合金的晶体结构随热处理温度的改变以及ＤＴＡ曲线，结果表明，非晶Ｎｉ－Ｗ－Ｐ合金在晶化过程中形成两个纳米超微晶相，非晶Ｎｉ－Ｗ－Ｐ薄膜的热稳定性远高于通常使用的非晶Ｎｉ－Ｐ薄膜．     

聚乙撑二氧噻吩膜在氧化态的充电过程及电容研究

In this paper, the chronoamperometry was used to study the charging processes of polyethylenedioxythiophene (PEDOT) modified electrodes in the potential range where PEDOT was in the oxidized state. The results show that the charging behaviors of the PEDOT films are well agreed with the exhausted finite diffusion model. The dependence of the capacitance values of the films on potential and concentration of solution was also studied in this potential range.     

有机分子与聚电解质静电吸附成膜特性研究

选取多种有机分子及聚电解质，采用静电吸附自组装法制备了聚电解质，聚电解质、聚电解质，有机分子、有机分子，有机分子的复合薄膜，讨论了这些体系的静电吸附成膜特性及其成膜机理．     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c~(app)约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.