铁掺杂PMP泡沫制备工艺研究

 以聚-4-甲基-1-戊烯为泡沫骨架，二茂铁为掺杂材料，通过热诱导倒相技术制备出铁掺杂聚合物泡沫。掺杂泡沫的实际密度均高于理论密度，且沿轴向从上至下逐渐增大。在理论密度不变的情况下，掺杂泡沫实际密度随掺杂元素原子百分含量的升高而呈降低趋势。与PMP泡沫相比，掺杂泡沫的孔洞直径分布变宽且网络骨架尺寸有变大的趋势。     

Combining clustering and classification for remote-sensing images using unlabeled data

A joint clustering and classification approach is proposed.This approach exploits unlabeled data for efficient clustering,which is applied in the classification with support vector machine(SVM) in the case of small-size training samples.The proposed method requires no prior information on data labels,and yields better cluster structures.Through cluster assumption and the notions of support vectors,the most confident k cluster centers and data points near the cluster boundaries are labeled and used to train a reliable SVM classifier.Our method gains better estimation of data distributions and mitigates the unrepresentative problem of small-size training samples.The data set collected from Landsat Thematic Mapper(Landsat TM-5) validates the effectiveness of the proposed approach.     

Quantum Information Splitting of an Arbitrary Three-Qubit State by Using Cluster States and Bell States

A new application of cluster states is investigated for quantum information splitting (QIS) of an arbitrary three-qubit state. In our scheme, a four-qubit cluster state and a Bell state are shared by a sender (Alice), a controller (Charlie), and areceiver (Bob). Both the sender and controller only need to perform Bell-state measurements (BSMs), the receiver can reconstruct the arbitrary three-qubit state by performing some appropriately unitary transformations on his qubits after he knows the measured results of both the sender and the controller. This QIS scheme is deterministic.     

The symmetric and antisymmetric superexchange interactions in spin-Peierls system

The influences of Dzyaloshinskii Moriya （DM） interaction and Kaplan-Shekhtman-Entinwohlman-Aharony （KSEA） interaction on the dimerization of a spin-Peierls system are investigated theoretically by using the Lanczos numerical method. The ground state of the spin-Peierls system is still dimerized phase when both of the DM and the KSEA interactions have the same value with Heisenberg interaction. It is found that the KSEA interaction and uniform DM interaction are always against systemic dimerization, but the staggered DM interaction acts in favour of dimerization. Furthermore, the influences of the DM and the KSEA interactions are also studied in terms of the ground state index rate and the energy gap index rate of the dimerized Heisenberg system. The results show that the DM interaction makes the index rates larger, while the KSEA interaction makes them smaller.     

叠加压缩相干态的量子统计性质

研究了叠加压缩相干态的量子统计性质,给出了压缩和反聚束效应与叠加系数之间的关系。结果表明,叠加压缩相干态具有压缩和反聚束的现象。压缩奇偶相干态的有关结果均作为特例包含在本文的一般结论之中。     

金属-有机骨架材料二聚铜-苯-1，3，5-三羧酸酯中烷烃扩散机理的分子模拟研究

采用分子动力学方法研究了直链烷烃C₁—C₄在二聚铜-苯-1,3,5-三羧酸酯（Cu-BTC）中的扩散机理.首先计算了4种烷烃的自扩散系数,并进一步通过质心分布图与分子轨迹图详细讨论了主、次孔道中各种类型的扩散路径.研究结果表明,不同烷烃在Cu-BTC中表现出的不同或近似的宏观扩散速率,是由微观上受到不同的扩散路径阻力并偏好不同的扩散路径所造成的.这些信息可提高人们对该类材料的认识,并为材料的实际应用以及新材料设计提供理论指导. 关键词： 分子模拟 二聚铜-苯-1 5-三羧酸酯 烷烃 扩散机理     

具有双网络结构高强度和形状记忆水凝胶

本文将形状记忆功能引入到双网络水凝胶设计之中.首先合成了聚乙二醇-聚丙烯酰氧乙基三甲基氯化铵/聚（丙烯酰胺-co-丙烯酸）（PEG-PDAC/P（AAm-co-AAc））双网络水凝胶,其中第一套网络由交联的聚乙二醇（PEG）链组成,包埋着聚电解质聚丙烯酰氧乙基三甲基氯化铵（PDAC）;第二套网络由丙烯酰胺（AAm）和丙烯酸（AAc）的共聚物交联组成,交联剂为N,N''-亚甲基双丙烯酰胺（MBAA）.结果表明,双网络水凝胶显示出高强度的特点,其断裂应力和韧性分别达到了0.9 MPa和3.8 MJ/m³.和传统地利用中性高分子作为柔软和韧性的第二套网络相比较,本文选择将具有弱电解质特性的丙烯酸单体引入到第二套网络中,利用丙烯酸与三价铁离子的络合作用,成功地赋予水凝胶在氧化环氧反应条件下的形状记忆功能.结果表明,只要巧妙地引入响应性单体,高强度和形状记忆这两种最重要的特性可以同时被引入到双网络水凝胶的设计之中.     

基于谱聚类和稀疏表示的高光谱图像分类算法EI北大核心CSCD

为了增强高光谱遥感图像的分类效果,提出基于谱聚类和稀疏表示的两级分类算法。利用谱聚类将待分类的像元及其邻域内所有的像元分成两类,利用联合稀疏表示模型确定按规则选取的其中一类的具体类别,并以该类别作为像元的类。该算法充分利用高光谱图像的光谱及空间信息,两级分类过程均考虑了噪声及区域边界对分类效果的影响。进一步利用空间信息对分类算法进行修正,即关联邻近像元的类别,平滑分类结果。数值实验表明,该算法的分类精度高、稳定性好、抗噪性强。     

聚对苯二甲酸乙二醇酯C=O伸缩振动模式ATR二维相关红外光谱研究

采用变温傅里叶变换衰减全反射红外光谱技术(ATR-FTIR)结合二维相关红外光谱技术,分别研究了聚对苯二甲酸乙二醇酯(PET)的羰基红外伸缩振动模式(νC=O)。研究发现:玻璃转化温度(Tg)以下时,PET的νC=O的红外吸收频率包括1700cm~(-1)、1709cm~(-1)和1718cm~(-1),而随着测定温度的升高(313~343K),其红外吸收强度变化快慢顺序为:1709cm~(-1)1700cm~(-1)1718cm~(-1);而当在Tg以上时,PET的νC=O的红外吸收频率包括1709cm~(-1)和1718cm~(-1),而随着测定温度的升高(353~393K),PET的νC=O红外吸收强度变化快慢顺序为:1718cm~(-1)1709cm~(-1)。本项研究拓展了ATR二维相关红外光谱技术在PET高分子材料热变性研究的范围。