Co-occurrence of Dominant Direct and Indirect Transitions in Low Temperature Sputtered Indium Tin Oxide Thin Films on Polymers

Indium tin oxide （ITO） layers are prepared on polymethylmethacrylate and polyethylene terephthalate by rf- magnetron sputtering at room temperature. Their 3D-AFM images and visible transmittance spectra are contrastively characterized and studied. An interesting morphological effect of the polymer substrates on their top ITO layers is observed. Dominant direct and indirect transition types deduced from optical spectra are surprisingly found in ITO films on different polymers. Furthermore, qualitative band structures are figured, and some theoretical discussions about the correlation of optical band structure, interface/surface morphology and carrier density are also presented.     

Preparation and Characterization of Polypyrrole Microbelt via Cotton Template

脱脂棉作为模板首次合成了聚吡咯微带. 聚吡咯微带的结构通过红外进行表征,微带的稳定性、形貌和电性能通过扫描电子显微镜、热重分析仪和四探针电导率仪进行检测. 提出了聚吡咯微带的形成机理,并且结合实验结果分析了吡咯的摩尔浓度对材料的电导率的影响.     

聚吡咯-钛酸钡复合材料的制备和吸波性能

通过化学氧化法在乳液聚合体系中合成了聚吡咯. 然后以脱脂棉作为模板使用溶胶-凝胶法合成了钛酸钡微带. 以合成的两种材料作为基体相按不同的比例制备了聚吡咯-钛酸钡复合材料. 复合材料的结构形貌和性能通过红外、X射线衍射、扫描电镜以及网络分析仪检测. 使用PNA3629D网络分析仪测定复合材料在S和C波段的复数介电常数和微波损耗. 研究了钛酸钡和聚吡咯的质量比对复合材料吸波性能的影响. 提出了聚吡咯-钛酸钡复合材料的吸波机理.     

聚(2-甲氧基-5-辛氧基)对苯乙炔/TiO2纳米复合材料的光物理性能研究

通过原位强碱诱导下的脱氯化氢缩合聚合法制备了一系列不同纳米TiO2含量的聚(2-甲氧基-5-辛氧基)对苯乙炔/纳米二氧化钛(PMOCOPV/TiO2)光电复合材料。红外光谱和拉曼光谱证实了在纳米TiO2表面的包覆层为PMOCOPV。紫外-可见吸收光谱表明随着TiO2含量的增加PMOCOPV/TiO2纳米复合材料的吸收强度提高。高分辨透射电镜观察发现PMOCOPV/TiO2是具有核-壳结构的纳米复合粒子,直径约30 nm,其中PMOCOPV包覆层的厚度约为8~10 nm。荧光光谱研究表明,PMOCOPV/TiO2纳米复合材料的最大发射波长随着TiO2含量的增加发生红移,荧光寿命约为1 ns,且随着TiO2含量的增加荧光强度和荧光寿命得到显著提高,并通过PMOCOPV/TiO2纳米复合材料中的激子离化和电荷传输过程以及复合材料中的电势能级探讨了PMOCOPV/TiO2的荧光量子效率和荧光强度增加的机理。     

Deterministic Secure Quantum Communication with Cluster State and Bell-Basis Measurements

We present a novel protocol for deterministic secure quantum communication by using the lour-qubit cluster state as quantum channel. It is shown that two legitimate users can directly transmit the secret messages based on Bellbasis measurements and classical communication. The present protocol makes use of the ideas of block transmission and decoy particle checking technique. It has a high capacity as each cluster state can carry two 5its of information, and has a high intrinsic efficieney 5ecause almost all the instances except the decoy checking particles （its numSer is negligible） are useful. Furthermore, this protocol is feasible with present-day technique.     

70MHz连续波质子束脉冲化装置

为了进行强流回旋加速器关键技术研究, 中国原子能科学研究院建立了一个强流回旋加速器综合试验装置. 中国原子能研究院将在这个回旋加速器综合试验装置上建立强流脉冲化实验装置, 目标是实现几十至百keV量级的强流束的脉冲化. 具体是将70MHz连续波负氢束脉冲化为重复频率1—8MHz, 脉冲宽度约为10ns的脉冲质子束. 脉冲化装置将主要包括束流切割器和聚束器两大系统. 聚束器采用频率为70.487MHz的双间隙单漂移栅网结构, 可以将直流束压缩到±30°的回旋加速器高频接受相宽之内. 束流切割器将采用频率为2.2MHz的正弦波, 切割后的脉冲宽度将小于8ns, 最后得到的脉冲束的重复频率为4.4MHz.     

相干态与压缩态迭加的量子特性

基于量子力学基本理论,构造了一个由相干态与单模压缩态构成的新迭加态:|φ>=N(|α> eiψ|β>g);详细讨论了其压缩效应和光子数反聚束效应,发现该迭加态呈现出多样的量子特性.在按类似奇偶相干态的方式迭加时,迭加态具有奇偶相干态和压缩奇偶相干态的某些特性.作为特例,当压缩因子为0时,可以得到奇偶相干态和相干态.     

上海光源150MeV电子直线加速器的设计与调试

上海光源150MeV直线加速器由热阴极电子枪,次谐波聚束器和聚束器,四根S波段等梯度行波加速管及必要的磁铁等组成.外围还有由从微波到直流的电源和功率源,性能监测和联锁控制的硬件和软件等.概述了150MeV直线加速器的设计,安装,调试和达到的结果.     

Effect of Temperature and Ionic Concentration on Self-Assembled Films of Chicago Sky Blue

We employ a layer-by-layer adsorption technique for deposition on solid substrates of polyionic films of Chicago Sky Blue. Film growth was significant with the increasing number of layers. Photochemical properties of these films are investigated for different ionic concentrations. A significant blue shift is observed with the increasing ionic strength of the solution, suggesting the formation of aggregation. Temperature effect studies show some preferable reorientation of molecules in the film during cooling process. Most remarkable observation is that the absorption intensity is the highest for a particular degree of inclination. Deposition time is fixed at 15rain because adsorption kinetics results show saturation after 15 min.