Y2O2S：Eu,Mg,Ti,Tb红色长时发光材料的研究

利用高温固相反应法合成了一种新型的红色长时发光材料－Y2O2S：Eu,Mg,Ti,Tb.材料的XRD测试结果表明Eu掺杂引起Y2O2S，Eu,Mg,Ti,Tb晶胞增大，激发光谱，发射光谱和发光衰减曲线表明该材料是一种适合紫外线和可见光激发，并具有很好的长时发光性能的红色长时发光材料，热释光谱测试结果表明该材料可能具有两个较深的陷阱能级，研究了Eu,Mg,Ti,Tb的加入量对材料发光特性的影响。结果表明：Eu,Mg,Ti,Tb影响材料的初始亮度和发光时间，Eu决定材料的红色比。     

Crystal Structure, Thermal Stability and Luminescence of Coordination Polymer [Cd（BBP）（p-PDOA）]n

Hydrothermal reaction of Cd（NO3）2·4H2O with bbp and p-PDOAH2 at 140 ℃ yielded a novel 1D cadmium（Ⅱ） coordination polymer, [Cd（bbp）（p-PDOA）]n （bbp=2,6-bis（benzimidazol-2-yl）pyridine, p-PDOA=p-phenylenedioxydiacetate dianion）, in which CdN3O4 pentagonal bipyramids were linked by p-PDOA ligands in a bis-bidentate mode to construct a zigzag chain with the adjacent Cd…Cd distance of 1.14（1） nm, There exists a 2D supramolecular network linked by π-π stacking with a face-to-face distance of 0.35（1） nm between the 2,6-bis（benzimidazol-2-yl） pyridine ligands and hydrogen-bonding interactions （0.27（4） nm）. A 3D supramolecular network was further constructed by these non-covalent interactions between the zippers. The TG/DTG showed that its chain skeleton was thermally stable up to 389 ℃ and the blue fluorescent emission of the complex was determined at 428 nm in a solid state with its long decay lifetime of 7.24 ns.     

Poly（meta-phenylene） Derivative with Rigid Twisted Biphenyl Units in Backbone： Synthesis, Structural Characterization, Photophysical Properties and Electroluminescence

A soluble poly(meta-phenylene)derivative with rigid twisted biphenyl unit was synthesized by the Yamamoto coupling reaction.The polymer is soluble in common organic solvents,and the number-average molecular weight is about 6500.The UV-Vis and quantum chemical calculation indicate that the different conformation segments named "conformers" exist in the polymer backbones;it was also further confirmed by the single crystal X-ray diffraction study of the dimeric model compound.The π-π transition of biphenyl segments of twisted and planar conformations made the polymer exhibit a strong absorption around 256 nm and a weak absorption at about 300 nm.Furthermore,the polymer exhibits a strong UV photoluminescence at 372 nm when the excitation wavelengths are longer than 300 nm.The ultraviolet-emitting electroluminescence(EL)device with the single layer structure shows EL λmax of the derivative at 370 nm.     

Li3AlB2O6： Synthesis, Crystal Structure, and Its Luminescence Property Compared with LiSrBO3

The synthesis and crystal structure of Li3AlB2O6 with different cell parameters are reported and these cells are transformed each other from the confirmation of crystallographic structural analyses. The absorption spectrum, luminescence and lifetimes of the Li3AlB2O6 and LiSrBO3 solid compounds are measured and the comparisons are made between them. It is shown that the absorption edges are at about 400 nm (or band gap 3.1 eV) and there is one of absorption peaks at about 350 nm for the Li3AlB2O6 and LiSrBO3. The emission band (530 nm) makes a red shift and fluorescence decay time (24.39 ns) of the Li3AlB2O6 becomes smaller compared with the emission band (480 nm) and lifetime (93.16 ns) of the LiSrBO3 at the visible region. The transition energies and oscillator strengths of the clusters (Li3AlB2O6)2 and (LiSrBO3)2 lying at low excited states are calculated by the time-dependent Hartree-Fock method. The obtained results are used to model the photophysical properties and discuss the origin of spectral bands of the Li3AlB2O6 and LiSrBO3.     

含离子液体［bmim］Cl的反应介质中马肝醇脱氢酶的催化特性

 研究了马肝醇脱氢酶(HLADH)在含离子液体1-丁基-3-甲基咪唑氯酸盐(［bmim］Cl)的反应介质中的催化特性. 以乙醇为底物时,该酶在［bmim］Cl含量≤0.15 g/ml的体系中的活力高于在不含离子液体的体系中的活力; 离子液体浓度过高(＞0.15 g/ml)对酶活性有明显的抑制作用. 反应温度和pH对含离子液体的反应介质中酶活力的影响规律与不含离子液体时的规律相似. 与不含离子液体的反应介质相比, HLADH在含0.05 g/ml ［bmim］Cl的体系中催化乙醇氧化的活化能下降,酶反应的Vmax和Km均升高. 反应体系中低浓度(≤0.1 g/ml)的离子液体能提高酶的热稳定性,但高浓度(＞0.1 g/ml)的离子液体可降低酶的热稳定性. 紫外二阶导数光谱显示,在含不同浓度离子液体的反应介质中酶分子构象的变化有较大的差异.     

一种新的与微型化自发电池整合的电化学发光检测芯片研究

为实现微流控芯片电化学发光检测的微型化,开展了微型自发电池与微流控芯片的整合研究.设计并制作出一种简易、实用的微型化电化学发光检测芯片.初步的分析应用说明了以上设计的可行性.本文结果对催生完全自主性的微型化芯片实验室具有积极的意义.     

光谱电化学法研究亚甲基蓝的电还原反应

用极谱法研究亚甲基蓝(MB)的电极吸附过程早有报道.近几年,用光谱电化学法研究其电化学行为又引起了许多人的兴趣.但在光透薄层电极上,由于光程太短,测试溶液浓度较高,导致亚甲基蓝发生聚合,影响实验结果的准确测定.为此本文利用特制的比色皿型长光程薄层光谱电化学池,在低浓度条件下研究其在SnO_2镀膜玻璃电极上的电还原反应.     

藉时间分辨荧光技术研究氢苊、荧蒽与环糊精的络合过程

用时间分辨荧光技术研究二氢苊、荧蒽与β-环糊精的络合过程以及乙醇分子对络合过程的影响, 观察到它们在环糊精水溶液中有长寿命组份存在. 证明这些分子与环糊精分子发生了络合作用, 并根据荧光衰减曲线的指前因子计算出了它们的络合平衡常数.     

烟碱分子烙印聚合物的吸附特性

利用分子烙印技术，以烟碱为烙印分子，甲基丙烯酸(MAA)为功能单体，乙二醇二甲基丙烯酸酯(EDMA)为交联剂，合成了对烟碱具有特异性作用的分子烙印聚合物P(Nic)；通过平衡吸附实验，评价了其对烟碱的亲和力和选择性。与非烙印聚合物相比，P(Nic)对烟碱表现了很高的亲和力；Scatchard分析表明在P(Nic)中存在对烟碱有不同的亲和力的两类作用位点。通过与氨基吡啶类物质在P(Nic)上的吸附行为比较，表明P(Nic)对烟碱具有很好的选择性。本工作证明了用P(Nic)作为固相萃取(SPE)材料选择性地从烟草烟雾中提取烟碱的可能性。     

CuO超细粉体的形貌与红外特性研究

CuO作为一种多功能精细无机材料，在印染、陶瓷、玻璃及医药等领域的应用已有数十年的历史，作为催化剂的主要活性成分，近年来在氧化、加氢、C１化学合成、NOx还原、CO及碳氢化合物燃烧、精细化工等多种催化反应中也得到了广泛的应用。可以推测，当CuO材料的粒度达到纳米级时，将使它的功能更加独特，应用更为广泛。因此CuO纳米材料的制备方法、聚集状态、与其他组分或载体的作用状况及催化活性等成为当前功能材料发展的研究热点之一犤１～８犦。我们在前文中报道了直接热解Cu２（OH）２CO３所得CuO粒径小、分布均匀、比表面积大，…