热压制备(AgSbTe2)100-x-(GeTe)x合金的热电性能

以Pb粉、Te粉、Ag粉、Ge粉为原材料,在真空气氛下合成(AgSbTe₂)_100-x-(GeTe)_x (x=80---90) (TAGS)合金热电材料, X射线衍射(XRD)分析表明,热压烧结后合金具有低温菱形结构. 通过热压烧结法将TAGS粉末制备成块体材料,运用XRD和扫描电子显微镜对材料的物相成分、 晶体结构和形貌进行了表征.采用直流四探针法测定样品的电导率,当样品两端的温差为1---4℃ 的情况下测量Seebeck系数.通过材料热电性能测试,研究了30---500℃温度范围内不同组分 样品性能参数的变化.结果表明,所制备的TAGS热电材料具有纳米结构, 其性能随着组分的变化而变化, TAGS-80具有较好的热电性能,在530℃时具有最高热电优值(ZT=1.80).     

First-Principles Calculation for the Electron-Phonon Coupling Constant of Superconducting MgB2

We use a first-principles plane wave method with the new relativistic analytic pseudopotential of the Hartwigsen,Goedecker and Hurter (HGH) scheme and the pseudopotential of the Troullier-Martins scheme to calculate the eleetron-phonon coupling constant λ of superconducting MgB2. The calculated results show that there is a peak at about 300-350cm^-1 in the eleetron-phonon spectral functional α2F(ω), duo to the coupling of the electrons to the acoustic phonon, and the relativistic effect appears in the high frequencies zone. All the results agree well with the present and previous experimental data,     

微激光冲击DZ17G合金的表面完整性影响研究

为了在不影响柱状晶组织的前提下改善DZ17G定向凝固合金的力学性能,采用微激光冲击强化方法进行表面处理,通过X射线衍射、扫描电子显微镜、透射电子显微镜和显微硬度计,测试分析微激光冲击对DZ17G定向凝固合金表面完整性的影响。试验结果表明:在水下无吸收保护层微激光冲击处理后,合金表面发生了烧蚀、熔融,1次冲击后形成光滑熔融区,但随着冲击次数增加而形成了大量微小烧蚀孔洞和难熔颗粒;表层组织仍由和两相组成,柱状晶内形成了高密度位错和位错缠结,但未发生晶粒细化;硬度在深度上呈梯度分布,冲击1次后硬化层深度仅为100 m,表面硬度值达到503 HV,提高了22.7%,而且硬度值和硬化层深度都随着冲击次数增加而增大。     

Room-Temperature Magnetism Realized by Doping Fe into Ferroelectric LiTaO3

We synthesize LiTal-x FexO3-σ （LTFO） remain single phase up to x = 0.09 ceramics by the conventional solid-state reaction method. The samples The magnetic measurements show that the doping of Fe successfully realizes ferromagnetism of LTFO at room temperature. The dielectric measurements indicate that LTFO is ferroelectric, similarly to LiTaO3 （LTO）, but its ferroelectric Curie temperature seems to decrease with the increasing Fe content. By means of doping Fe ions into LTO, the coexistence of spontaneous electric polarization and spontaneous magnetic moment is realized at room temperature.     

Effect of Tin Incorporation on Thermo-Mechanical Properties of Glassy Se80Te20 Alloy

We report an analysis on the hardness behavior of glassy Se80？xTe20Snx alloy. The crucial thermo-mechanical parameters （micro-hardness, volume and formation energy of micro-voids and the modulus of elasticity） are examined. The results indicate that the thermo-mechanical parameters are changed significantly after incorporation of Sn in glassy Se80Te20 alloy.     

Mg合金晶粒细化机理的电子理论研究

采用递归法计算了α-Mg与α-Zr的结构能、原子结合能,Mg/Zr界面能与Mg/液态Mg界面能,Mg中Zr及Zr中Fe,Mn,Si等杂质原子相互作用能.计算发现α-Zr的结构能、原子结合能低于相应的α-Mg,且Mg/Zr界面能低于Mg/液态Mg界面能,从能量角度合理解释了Zr先于Mg从Mg熔体析出,并作为异质核心细化Mg晶粒的实验现象.原子相互作用能的计算结果显示,Zr在Mg中相互吸引形成团簇,并与杂质形成化合物,削弱晶粒细化效果. 关键词： 电子结构 晶粒细化 Mg合金     

LaB6场发射阵列牺牲层制备工艺

 分析了传统牺牲层材料铝在制备LaB6场发射阵列时存在的问题,利用溅射及热蒸发工艺依次制备铝膜和氧化锌膜,制备出了一种新型的牺牲层——ZnO-Al复合牺牲层,并对所制备的阵列进行了测试。实验结果表明：ZnO-Al复合牺牲层能够有效地解决电化学腐蚀的问题,所制备出的LaB₆场发射阵列尖锥保持了完好的形貌,其发射特性也达到了最初制备场发射阵列的要求,说明ZnO-Al复合牺牲层是作为LaB₆场发射阵列牺牲层的理想材料。     

Phase Transition and Thermodynamics of Ruthenium Diboride via First-Principles Calculations

The pressure induced phase transitions of RuB2 from the OsB2-type structure to the ReB2-type structure are investigated by first-principles calculations based on the plane-wave basis set with the generalized gradient ap- proximation for exchange and correlation. It is found that the phase transition occurs at 18.6 GPa. We predict the phase transition from the OsB2-type RuB2 to the ReB2-type RuB2 at high temperatures for the first time. The dependences of the heat capacity, thermal expansion coefficient, and the Grüneisen parameter on pressure and temperature for OsB2-type RuB2 and ReB2-type RuB2 are also investigated.     

Experimental investigation on a software synchronous optical sampling technique based on periodically poled lithium niobate

A software synchronous optical sampling system is constructed based on sum frequency generation (SFG) in periodically poled lithium niobate (PPLN). Five gigahertz of a non-return-to-zero (NRZ) data signal is sampled by sampling pulse with the repetition frequency of 29.31 MHz. The power of the SFG light is set at 23 dBm, and an eye diagram is successfully recovered. A band-pass filter is added before the sampling pulse is subjected to erbium-doped fiber amplifier to reduce gain competition and ensure a high power level of SFG.     

基于蒙特卡罗方法的α粒子细胞S值计算

在放射性免疫治疗以及硼中子俘获治疗（BNCT）等放射性治疗过程中,粒子通过与人体组织材料相互作用产生次级电子将能量传递给人体组织,放射性核素在细胞尺度分布的不均匀性将严重影响靶区剂量分布。为深入了解放射性核素在细胞中不同位置分布对靶区剂量影响,采用基于历史凝聚算法的Monte Carlo 工具包Geant4编写了细胞S值计算程序。计算了2种细胞尺寸,12种粒子能量,3种源分布方式的细胞S值,与医学内照射剂量（MIRD）委员会解析算法的计算结果进行对比,发现两者差异在1%以内。证明了Geant4在m尺度下细胞剂量计算的可行性,并对BNCT治疗过程中产生的粒子(1.47 MeV与1.78 MeV)的细胞S值进行计算。