Theoretical Design of High-spin Organic Molecules with —^＊N—S— as a Spin-containing Fragment and Heterocycle as End Groups

IntroductionDesigns and syntheses of organic molecules withvery high-spin ground states have been a topic of greatinterest[1—8].One of the rational approaches to desig-ning high-spin molecules,which has been proposedand studied by several groups[9,10],in…     

Sansalvamide A固相合成新方法

报道了Pd催化丁基二乙基硅烷树脂与N-Boc-4-溴代苯丙氨酸甲酯直接反应形成Si—Ar键一步构建出硅基连接分子的新方法, 并采用Boc策略增长肽链, 以PyBOP (benzotriazole-1-yl-oxy-tris-pyrrolidino-phosphonium hexafluoro- phosphate)为环合剂固相合成了sansalvamide A.     

新型噻吩基取代卟啉的合成及其荧光光谱研究

合成了两种新型噻吩基卟啉－5，15－二（2－噻吩基）－2，8，12，18－四乙基－3，7，13，17－四甲基卟啉7a（45．1％）和5，15－二（2－联噻吩基）－2，8，12，18－四乙基－3，7，13，17－四甲基卟啉7b(61.2%),并研究了它们的光谱性质，其中荧光光谱的最大发射峰蜂都在631nm处，量子产率分别为4．1％（7a)和1．4％（7b)。     

新型混合脂质体的制备及其与药物的分子识别研究

设计、合成了含核酸碱基的双亲化合物N6-十四酰基-9-辛基腺嘌呤三甲基溴化铵;用目标化合物和卵磷脂制备混合脂质体受体。分别研究了受体与巴比妥酸、核黄素药物在混合脂质体亲脂区通过互补氢键进行的分子识别。紫外可见光谱研究表明,底物巴比妥酸在258nm的吸收峰,核黄素在222nm,264nm的吸收峰随时间的延长而逐渐降低,这种减色作用归因于脂质体内的巴比妥酸和核黄素在亲脂区分别与双亲化合物上的腺嘌呤形成了氢键。     

Antiphase State in Passively Q-Switched Yb：YAG Microchip Lasers with a Nd,Cr：YAG as Saturable Absorber

We experimentally investigate the antiphase dynamics phenomenon that occurs in a diode-pumped passively Q-switched Yb:YAG multimode laser with a Nd,Cr:YAG saturable absorber. Due to the effect of spatial hole burning, the multimode lasers with one, two, or three modes at different pump power are observed, and the pulses sequences display classic antiphase dynamics.     

An Electro—Optical Modulator Based on GeO2—Doped Silica Ridge Waveguides with Thermal Poling

A Mach-Zehnder electro-optic modulator is designed and fabricated based on upper-clad GeO2-doped silica ridge waveguides with thermal poling.The electro-optic coefficient obtained is about 0.05pm/V and is polarizationinsensitive.An extinction ratio of over 17dB is achieved.The transmission loss of the modulator for the TE mode is 2-3dB higher than that for the TM mode after the poling.     

ICP-AES测定钛基复合材料中镍、钕和铁的研究

采用ICP－AES法对钛基复合材料中的合金元素镍、钕、铁的测定进行了研究，着重进行了基体元素及待测元素镍、钕、铁之间干扰试验及各元素在测定浓度范围内的线性相关性试验，进行了酸度试验，测定了钛基复合材料中3种元素的含量，得到了较好的精密度和准确度。方法简便、可靠，获得满意的分析结果。