Improved Electrochemical Performance of Mg-doped ZnO Thin Film as Anode Material for Lithium Ion Batteries

Zn1-xMgxO （x = 0, 0.18） thin films were fabricated on the copper substrates by radiofrequency magnetron sputtering using the high pure argon as a sputtering gas. The Zn1-xMgxO films were characterized by X-ray powder diffraction （XRD）, scanning electron microscope （SEM） and galvanostatic tests. The electrochemical test showed an improved electrochemical performance of Zn0.82EMg0.18O thin film as an anode material for lithium ion batteries.     

JEE—4x型真空镀膜仪功能扩展

报道了对ＪＥＥ－４ｘ型真空镀膜仪蒸发装置的改进以及建立蒸发材料回收装置的具体方法，并介绍了改进后该仪器在高分辨扫描电镜样品制备上的应用实例．实验证明，上述改进不但扩展了ＪＥＥ—４ｘ型真空镀膜仪的制样功能又节省了蒸发材料，集中了离子溅射法及常规高真空镀膜法的优点，完全满足ＳＥＭ样品的分析要求，该方法简单易操作．     

膜催化研究IV: 钯-氧化铝/陶瓷复合膜

本文在无机氧化铝膜的基础上掺入钯, 用sol-gel法制得钯-氧化铝/陶瓷复合膜, 将该膜用于乙醇脱氢制乙醛反应, 分别考察了反应温度、乙醇进样量以及内管惰性气体吹扫气流对乙醛产率的影响, 并在相同条件下比较了常规反应器及单纯氧化铝膜反应器的结果。实验数据表明, 氧化铝膜中掺入钯后可显著提高乙醛产率。本文测定了该复合膜的H2/Ar分离系数、孔径分布, 并利用电子显微镜、X射线衍射等手段对其进行了表征。     

现场傅里叶变换-红外光谱及紫外-可见光谱电化学研究高氯酸四苯基卟啉合锰(Ⅲ)氧化还原机理

本文以现场透射傅里叶变换-红外光谱及紫外-可见光谱电化学方法,研究了高氯酸四苯基卟啉合锰(Ⅲ)在二氯乙烷溶液中电极氧化还原的机理,发现了红外及紫外—可见光谱电化学的证据,表明该锰(Ⅲ)卟啉的第一步还原反应的电子转移发生在金属中心上,生成锰(Ⅲ)卟啉,而第一步氧化反应是发生卟啉环上,生成锰(Ⅲ)卟啉环阳离子自由基。     

Pd/PdO在MCM-41介孔材料孔表面的溶液移植

利用PdCl~2溶液与介孔结构硅酸铝合成原粉反应,把Pd/PdO多用途催化剂移植到MCM-41材料孔表面。产物用XRD,热分析(TG/DTA),TEM,N~2吸附及FT-IR光谱等手段进行表征。结果表明,钯经由Si-O-Pd键负载在硅酸铝骨架及孔表面上。在有序介孔材料外表面沿着孔道方向粘附着直径为10-30nm的Pd/PdO晶粒。研究表明,采用这种液相移植的方法可以有效负载金属催化剂,并防止孔道堵塞。     

复合近红外光谱法在牛奶测定中的应用

研究了用于快速测定牛奶主要成分含量的近红外透射光谱法和漫反射光谱法,分析了两种方法在实际测量中的差异,并提出将两种方法结合形成复合光谱法用于牛奶成分含量的检测。结果表明:复合光谱法的应用有效地提高了多变量回归分析中牛奶成分含量的预测精度。     

Y2O3:Eu3+纳米线阵列的制备与表征

Y2O3:Eu3+红色荧光粉由于色纯度高、化学性质稳定和量子效率接近100%而广泛用于荧光灯和投影电视等方面.近年来,Y2O3:Eu3+的大量研究工作主要集中于纳米粉末的制备方法及其与体相材料不同的发光特性[1～3].最近,有关Y2O3:Eu3+及其稀土化合物的纳米管、纳米线和纳米带一维材料的制备成为研究热点.Wu Changfeng等[4,5]利用表面活性剂合成了Y2O3 : Eu3+纳米管.激光格位选择激发测试结果表明,Eu3+在纳米管中占据3个不同的格位,其611 nm处的红色发光峰出现了宽化.He Yu等[6]采用水热法及退火处理制备出了Y2O3:Eu3+纳米带,发现Eu3+的发射峰不仅宽化,而且出现了625 nm的新峰.Li Yadong等[7～9]采用水热法制备了稀土氧化物、硫氧化物和氢氧化物等的纳米线和纳米管,并探索了其形成机理,同时发现Y2O3S : yb3+,Er3+具有上转换的性质.     

Controlled Synthesis of Sea-urchin-like ZnO Nanomaterials with the Aid of Ethylene Glycol Using a Solvothermal Method

Sea-urchin-like ZnO nanomaterials were successfully synthesized by decomposition of zinc acetate precursor in the presence of sodium hydroxide and ethylene glycol(EG) in an ethanol solution using a solvothermal method at 180 ℃ for 12 h.The crystalline phase and morphology of the resultant nanomaterials were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),selected-area electronic diffraction(SAED) and high-resolution electron microscopy(HRTEM).Interestingly,the sizes and prod length of the samples can be easily tuned by changing the amount of directing agent EG and keeping other reaction conditions unchangeable.On the basis of our experimental outcomes,EG-controlled-nucleation-growth formation mechanism was proposed to correspond for the sea-urchin-like ZnO growth processes.And the photoluminescence(PL) spectra of the as-selected samples were measured at room temperature,presenting two emission peaks centered at～388 and 480 nm.     

Fischer-Tropsch synthesis by nano-structured iron catalyst

Effects of nanoscale iron oxide particles on textural structure, reduction, carburization and catalytic behavior of precipitated iron catalyst in Fischer-Tropsch synthesis (FTS) are investigated. Nanostructured iron catalysts were prepared by microemulsion method in two series. Firstly, Fe2O3, CuO and La2O3 nanoparticles were prepared separately and were mixed to attain Fe/Cu/La nanostructured catalyst (sep-nano catalyst); Secondly nanostructured catalyst was prepared by co-precipitation in a water-in-oil microemulsion method (mix-nano catalyst). Also, conventional iron catalyst was prepared with common co-precipitation method. Structural characterizations of the catalysts were performed by TEM, XRD, H2 and CO-TPR tests. Particle size of iron oxides for sep-nano and mix-nano catalysts, which were determined by XRD pattern (Scherrer equation) and TEM images was about 20 and 21.6 nm, respectively. Catalyst evaluation was conducted in a fixed-bed stainless steel reactor and compared with conventional iron catalyst. The results revealed that FTS reaction increased while WGS reaction and olefin/paraffin ratio decreased in nanostructured iron catalysts.     

CO分子结点电子结构和输运性质的第一原理研究

采用基于密度泛函理论(DFT)的非平衡态格林函数方法(NEGF), 计算了CO分子结点低偏压下的电流和电导. 通过系统透射谱、投影态密度(PDOS)以及分子自洽投影哈密顿量(MPSH)本征态的分析将透射通道与局域分子轨道联系起来, 从系统电子结构解释了其传输性质. 讨论了电荷转移对系统电导的影响.