光同时诱导水中Cr(Ⅵ)的还原与橙黄Ⅱ的氧化

光同时诱导水中Cr(Ⅵ)的还原与橙黄Ⅱ的氧化;染料;橙黄Ⅱ;Cr(Ⅵ);光还原;光降解     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-L-GLUTAMATE): FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

  Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform. Field emission scanning electron microscopy (FESEM) and attenuated total reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats. It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads, while microfibers could be electrospun at the concentration of 22 wt%. The hydrophobicity of the electrosprayed/electrospun PSLG mats was investigated with static water contact angle (WCA) and tilt angle measurements. It was demonstrated that the superhydrophobic surfaces of PSLG with WCAs and tilt angles in the ranges of 150°-170° and 16.5°-4.2°, respectively, were obtained through electrospraying/electrospinning process.     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

碱性溶液中金电极上氧还原中间物研究

应用改进了的旋转全电极上的电势阶跃计时库仑法,分别测定了不同电极电势下氧还原过程中电极吸附中间物和溶解中间物氧化所需的电量,实验证明,在此过程中电极上确有吸附中间物存在,而且是电极电势的函数,但其分子属性尚需进一步鉴别。     

利用高炉水淬渣制备(Ca/Y)-α-Sialon陶瓷的组织与性能

以高炉水淬渣合成的Ca-α-Sialon粉体为原料采用无压烧结技术制备了（Ca/Y）-α-Sialon陶瓷。通过用排水法、三点弯曲实验法、金相显微镜法、XRD法等手段研究了（Ca/Y）-α-Sialon陶瓷的烧结致密化过程、材料的力学性能、显微组织、相组成和材料的断裂特征。结果表明,适量的Y2O3促进材料的烧结致密化和提高材料的力学性能,但Y2O3过量（大于10%）时对材料的烧结和力学性能不利。掺杂Y^3＋的（Ca/Y）-α-Sialon呈柱状晶,随着Y2O3含量的增加和烧结温度的提高,（Ca/Y）-α-Sialon呈柱状晶出现粗化和等轴化。含10%Y2O3的材料在1700℃烧结时可获得较高的力学性能。     

SSCH3光解离的多参考理论计算

摘要运用多参考微扰理论(Multireference MΦller-Plesset theory)计算了SSCH3垂直激发能及其S-C与S-S两种断键方式的绝热(Adiabatic)与非绝热(Diabatic)的基态和激发态势能曲线, 研究了在193nm激光作用下SSCH3的光解离过程, 理论计算值与实验值相符.     

NdOx作为助催化剂对PtRu/C电催化氧化甲醇活性的影响

采用沉积-还原法制备了PtRu-NdOx/C催化剂, 借助TEM、EDS和XRD等测试手段对其进行了微结构和组成的表征. 结果表明, 催化剂中Pt与Ru以合金形式存在, 而Nd的氧化物则以无定形形态存在. 催化剂粒子的平均粒径在2 nm左右, 晶胞参数为0.3896 nm, Nd氧化物的加入对PtRu合金的晶体结构影响不明显. 采用循环伏安法和计时电流法, 比较了PtRu-NdOx/C催化剂和PtRu /C催化剂对甲醇氧化的电催化活性, 结果表明, 加入Nd的氧化物作为助催化剂能明显提高PtRu /C催化剂对甲醇氧化的电催化性能.     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

Reduction of 4-nitrophenol catalyzed by nitroreductase

The reduction of 4-nitrophenol catalyzed by nitroreductase in the presence of NADH was investigated in this paper.4-Amino- phenol and 4-bydroxylamino-phenol were found in the reductive products.The relationship between reaction time and the reductive ratio were studied.The similar reducing ratios of 4-nitrophenol were obtained under aerobic and anaerobic conditions.The results indicated that an oxygen-insensitive reaction was proceeded in the reduction of 4-nitrophenol and nitroreductase was an oxygen- insensitive enzyme.The reductive products of 4-nitrophenol were determined by HPLC and MS.