Modified Photoluminescence by Silicon-Based One-Dimensional Photonic Crystal Microcavities

photoluminescence (PL) lrom one-dimensional photonic band structures is investigated. The doped photonic crystal with microcavitles are fabricated by using alternating hydrogenated amorphous silicon nitride (a-SiNx:H/a-SiNy:H) layers in a plasma enhanced chemical vapour deposition (PECVD) chamber. It is observed that microcavities strongly modify the PL spectra from active hydrogenated amorphous silicon nitride (a-SiNx:H) thin film. By comparison, the wide emission band width 208nm is strongly narrowed to 11 nm, and the resonant enhancement of the peak PL intensity is about two orders of magnitude with respect to the emission of the λ/2-thick layer of a-SiNx:H. A linewidth of Δλ=11 nm and a quality factor of Q=69 are achieved in our one-dimensional a-SiNz photonic crystal microcavities. Measurements of transmittance spectra of the as-grown samples show that the transmittance resonant peak of a cavity mode at 710nm is introduced into the band gap of one-dimensional photonic crystal distributed Bragg reflector (DBR), which further verifies the microcavity effects.     

热喷涂技术的现状和发展

介绍了热喷涂工艺的特点，喷涂方法的种类及其技术以及热喷涂技术的应用概况，并对热喷涂技术的发展方向给予了展望。     

Pt（IV）修饰的非晶态TiO2对2，4-二氯苯氧基乙酸的可见光降解

用溶胶-凝胶法制备了在可见光照射下具有光催化活性的掺杂P（t Ⅳ）离子的非晶态微孔TiO2，表面积为160～200 m2/g；含3.0%Pt（Ⅳ）的AMM-Ti具有最大的光催化活性. X射线精细结构分析（EXAFS）表明，单个的PtCl4分子均匀地分布在非晶态二氧化钛表面；用这种光催化剂降解2，4-二氯苯氧基乙酸时，2，4-二氯苯酚是主要的中间物，通过Langmuir-Hinshelwood 方程的线性形式估算了反应速率常数k 和吸附平衡常数K，研究了光催化起始反应速率和反应物起始浓度之间的关系，同时，提     

一种具有光开关功能的分子材料—光致自旋转换配合物

配合物分子材料的研究是对传统无机和有机材料的一种新发展和挑战．光致自旋转换配合物可望是实现光开关和记录信息的理想体系．     

空心材料导热性能预测研究

本文建立了一种预测空心材料导热性的方法。研究了空习材料的导热性。用柱形空心材料分析了体分比和孔洞的排列方式对整体材料导热性的影响，用圆柱形，方柱形空心材料和含裂纹材料，分析了空心形状对材料导热性的影响。同他人的实验结果和某些现有的理论模型比较表明，本文方法是有效的。本文的结果很好地解释实验结果。     

银包套YBa2Cu3O7—δ超导带

采用粉末装管工艺研制YBa_2Cu_3O_(7-δ)高温超导带材。研究了冷轧工艺和冷轧十压制工艺对带材J_c值的影响以及不同加工率线材超导芯的微观结构。实验结果表明,采用冷轧十压制工艺比单纯的轧制工艺所获得的带材J_c值高,随着加工率的增加超导芯的密度和临界电流密度增加。     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

Raman Spectra of Proton-Exchanged LiNbO3 Optical Waveguides

Based on the Raman spectrum measurement, we investigate the mechanism of proton exchange, by which the optical waveguides are formed in the LiNbO3 crystal which are proton doped. The proton source is formed by a mixture of benzoic and adipic acids. The experimental results show that there is a Raman formant peak of optical waveguide at 650cm^-1, and the higher the relative percentage of the mol ratio of adipic acid dilution, the higher the intensity of the Raman formant peak.