新型有机空穴传输材料氟代四苯基联苯二胺的合成与表征

设计和合成了一种新型的有机空穴传输材料N,N'-二苯基-N,N'-双(2-氟苯基)-[1.1'-联苯]-4,4'-二胺(FTPB),通过熔点测试、元素分析、FTIR光谱和1H NMR谱等手段对其分子结构进行了表征.采用循环伏安法(CV)结合UV-Vis吸收光谱测试了其能级结构.结果表明,其HOMO能级为-5.36eV,带隙为3.20eV,有望成为优良的空穴传输材料.     

同时实现介电常数和磁导率为负的H型结构单元左手材料

基于用一种结构同时实现材料介电常数和磁导率为负的思想，提出了H型结构单元左手材料模型.采用矩形波导法测试表明，H型结构单元在微波频率范围出现左手透射峰，并且可以由参数t对左手特性区域进行调控.同时利用相位法、棱镜折射法和散射参量法从实验和理论证明了在左手透射峰区域材料的折射率为负值，介电常数和磁导率亦同时为负.相对由金属开口谐振环与金属线两种结构组合实现的左手材料，H型结构集磁谐振与电谐振于一体，结构简单、制备方便，对微波器件左手材料表现出更多的优越性.     

SQUID用于铍材残余应力检测的计算机模拟

依据SMM-601型超导量子干涉显微镜检测部分构建计算模型,采用电磁场有限元方法分析了残余应力引起的非磁性金属材料铍电导率变化对超导量子干涉仪(SQUID)检测信号的影响,并讨论了该方法实际应用于非磁性金属材料残余应力检测的条件和可能性。     

超导故障限流器的研究现状及其应用

超导故障限流器(Superconducting Fault Current Limiter,SFCL)是利用超导体的基本特性,有效限制电力系统故障短路电流,提高电网安全性和稳定性的一种新型电力设备。文中在综合大量文献的基础上,对超导故障限流器进行了一种较为系统的分类。基于该种分类,结合目前国内外的研究现状,就电阻型、磁屏蔽型、饱和铁芯电抗器型、桥路型SFCL的工作原理作了详细的分析介绍,还给出了它们在电力系统中的安装位置。最后,对超导故障限流器的研究中存在的问题及其发展趋势做了说明。     

Y3Al5O12：Eu^3＋磷光体的溶胶—凝胶法合成及发光特性

以金属烷氧基化合物为原料．采用溶胶-凝胶法在1000℃下合成了Eu^3 掺杂的Y3Al5O12(YAG)磷光体。利用TG-DSC，XRD和发光光谱等对样品进行了表征。结果表明，YAG：Eu^3 的晶相形成温度为991℃。Eu^3 在非晶态和晶态YAG中的发射光谱有明显差异。研究了Eu^3 含量和烧结温度对Eu^3 的^5D0→^7F1和^5D0→^7F2发射峰强度的影响。随煅烧温度的升高和Eu^3 浓度的增加，Eu^3 发射峰强度增强。     

Ф3英寸双面超导薄膜Jc均匀性测量

临界电流密度Jc是评价超导薄膜质量的重要参数之一，采用Jc测量装置可以准确、快速、无损检测Ф2～3英寸双面膜的Jc均匀性。该装置是利用高温超导薄膜的超导转变对线圈内感应电压产生的变化这一原理，测量线圈由初级和次级组成，所用信号频率为20kHz，次级信号在同样频率下由锁相放大器检测，测量过程全部由计算机控制，对于超导微波滤波器应用所要求的高质量Ф2～3英寸双面超导薄膜材料，必须具有高的Jc和低的Rs值，采用该装置测量超导薄膜的Jc均匀性，与Rs对应关系进行分析，将有助于超导薄膜的质量控制。     

Direct Current Hopping Conductivity in One—Dimensional Nanometre Systems

A one-dimensional random nanocrystalline chain model is established.A dc electron-phonon-field conductance model of electron tunnelling transfer is set up,and a new dc conductance formula in one-dimensional nanometre systems is derived.By calculationg the dc conductivity,the relationship among the electric field,temperature and conductivity is analysed.and the effect of the crystalline grain size and the distrotion of interfacial atoms on the dc conductance is discussed.The result shows that the nanometre system appears the characteristic of negative differential dependence of resistance and temperature at low temperature.The dc conductivity of nanometre systems varies with the change of electric field and trends to rise as the crystalline grain size increases and to decrease as the distroted degree of interfacial atoms increases.     

High—Efficiency Organic Double—Quantum—Well Light—Emitting Devices Using 5,6,11,12—Tetraphenylnaphthacene Sub—monolayer as Potential Well

The double-quantum-well organic light-emitting devices of indium-tin-oxide (ITO)/NPB (50nm)/rubrene (0.05nm)/NPB (4nm)/rubrene (0.05nm)/Alq3 (50nm)/LiF (0.5nm)/Al were fabricated, in which N,N-bis-(1-naphthyl)-N,N‘-diphenyl-1,1‘-biphenyl-4,4‘‘‘‘‘‘‘‘-diamine (NPB) is used as a barrier potential or hole transport layer, tris (8-hydroxyquinoline) aluminium (Alq3) used as electron transport layer, and 5,6,11,12-tetraphenylnaphthacene (rubrene) as a potential well and emitter. The brightness can reach 18610cd/m^2 at 13V. The maximum electroluminescent efficiency of the device was 6.61cd/A at 7V, which was higher than that of common dope-type devices. In addition, the electroluminescence efficiency is relatively independent of the drive voltage in the range from 5 to 13V.     

Equivalent Antisymmetry Performance of Three—Dimensional Heterogeneous Anisotropic Composites

Starting from the physical features of materials, heterogeneous anisotropic composites (HAGs) are analysed on the basis of the understanding and applications of its equivalent antisymmetry performance. Moreover, the design parameter is optimized to attain the goal of maximizing the use of materials, which is quite meaningful. The HAG structure is defined as a kind of equivalent structures according to the structure and properties of materials.We apply the mature plate theory and the composite materials laminate theory in analysis of the HAG structure,and in this way a new concept and a new idea are expected.     

Epoxy Resin-Photopolymer Composite with None-Shrinkage for Volume Holography

A novel photopolymer storage medium for holographic storage is presented. In particular, the refractive in-dex of the monomer methyl methacrylate is much lower than that of the binder epoxy resin solidified by m-xylylenediamine, and the material can be developed into samples with dimension stability and high optical quality and thickness of several millimetres or more. Some none-polymeric macromolecule impurity is uniformly mixed into the medium to aid the monomer diffusing and to enhance the diffraction efficiency. A holographic recording medium of 0.8 mm thickness has been fabricated, and relative theoretical analysis and experiments are presented.