Analysis of 17β-Estadiol from Sewage in Coastal Marine by Surface Plasmon Resonance Technique

In this study, surface plasmon resonance （SPR） for monitoring 17β-eatradiol （E2） was developed. The small molecule E2 was immobilized on a CM5 sensor chip for an indirect competitive immunoassay to detect E2. The SPR response bahed on the antigen-antibody reaction was measured by injecting the sample solution into the flow system. The limitation of detection was 0.445 μg/L. The developed SPE-SPR system was applied to analyze the seawater samples. Recovery of E2 was 91.6%-93. 1%. Relative standard deviations（RSD） for the E2 assay were between 10.9%-15.1% （n = 3）. The range of determination of E2 samples from the sewage in the coastal marine environ-ment was between ND（lower than detection limit） and ca. 11.78 ng/L.     

A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.     

(甲基)丙烯酸酯的基团转移聚合

<正> 基团转移聚合方法自问世以来,由于其突出的优点,受到日益广泛的重视。本文来用丙二酸二乙酯的硅烯醇醚类引发剂3-乙氧基-3-三甲基硅氧基丙烯酸乙酯 (CH_3CH_2O_2CCH=C(OCH_2CH_3)OSiMe_3)和亲核型催化剂四乙基二氯化氢氨((CH_3CH_2)_4NHF_2)进行甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸乙酯(EA)和丙烯酸甲酯(MA)的基因转移聚合。得到了近     

胶束介质在速差动力学分析中的应用

本文主要报道溴化十六烷基三甲胺(CTMAB)表面活性剂在速差动力学分析中的应用,并用于高温合金试样中钼和钛的同时测定,在CTMAB存在下,3,5-二溴水杨基荧光酮(3,5-DBSF)与钼、钛形成三元配合物,其灵敏度比二元配合物分别提高了5.4和17.3倍,且由于胶束介质的存在,扩大了两组分形成配合物反应速率的差别,大大改善了方法的选择性。铝(III)、钙(II)、钴(II)、铬(III)、铜(II)、铁(II)、镁(II)、镍(II)等元素的允许量均在毫克级以上。钼的三元配合物形成速率较快,20秒内基本反应完全,钛的反应速率较慢,10分钟才达到平衡,基于两组分反应速率差别,采用对数外推法,经微机计算处理,进行了高温合金中钼、钛的同时测定,其相对偏差在5%以内。     

溶液pH值对聚邻甲苯胺电化学性质的影响

本文报道了溶液pH值对聚邻甲本胺电化学性质的影响。研究结果表明,电化学合成的聚邻甲苯胺的循环伏安曲线、氧化电位、膜的颜色、充放电容量、紫外可见光谱以及氧化还原活性都受到溶液pH的影响。在低pH值的溶液中,随着扫描电位的变化,聚邻甲苯胺膜的颜色可逆地变化,而在pH4.13的溶液中进行扫描时,膜的颜色不变化,电化学活性也消失。     

导电性聚呋喃的氧化合成及应用

总结了芳香族聚呋喃的氧化聚合方法,系统论述了聚合过程中影响聚呋喃性质的各种因素,推测了聚呋喃的链结构,介绍了聚呋喃的各种改进方法和效果。指出聚呋喃及其共聚物是一种电导率在10-11到10-1S.cm-1范围内有机半导体材料,其电聚合沉积膜具有奇特的电活性、优良的热加工性和特殊的表面形貌,可望在金属离子和有机物质的吸附与富集、传感探测等领域发挥作用。     

水相湿法改性纳米碳酸钙表面性质的研究

用特定的表面改性剂在水相中对纳米碳酸钙的悬浮液进行了湿法改性。红外光谱和热失重分析证明,改性剂与碳酸钙之间以化学键结合;沉降体积和接触角的测定结果说明改性粒子在液体石蜡中的润湿性和疏水性得到了提高;透射电子显微镜照片显示改性粒子在液体石蜡中有更好的分散性;体系粘度实验表明改性粒子与液体石蜡之间有较好的相容性。     

Synthesis of polypiperazine-amide thin-film membrane on PPESK hollow fiber UF membrane

A new interfacial polymerization (IP) procedure is developed in order to synthesize polypiperazine-amide thin-film membrane on the inner surface of poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber ultrafiltration (UF) membrane.A hollow fiber composite membrane with good performance was prepared and studied by FT-IR and scanning electron microscopy.     

THE SYNTHESIS AND CHARACTERIZATION OF SOME POROUS CROSS—LINKED POLY （VINYLACETOPHENONE） RESINS AND THEIR CAPACITIES IN ADSORBING GYPENOSIDES

In search of a suitable adsorbent used for the enrichment and separation of natural saponins from an aqueous solution,a series of porous cross-linked poly (vinylaceto-phenone) resins I-Ⅸ were synthesized via the Friedel-Crafts acylation of styrene-divinyl-benzene copolymer beads.Their carbonyl contents were characterized by infrared spectra and elemental analysis.Their physical properties such as bulk densities,skeleton densities,and specific surface areas were also determined.The tests for the resins adsorption of gypenosides showed that only those resins with high carbonyl contents and large specific surface areas could favorably adsorb gypenosides from an aqueous solution with much higher capacities.     

表面包覆改性对纳米CeO2分散性的影响

了改善纳米CeO2在Zn-Al类共晶合金中的分散性,采用超声液相包覆法对纳米CeO2进行表面活性剂表面包覆改性,并用AES测定了包覆层的厚度,用TEM研究了CeO2的团聚状况,用TGA分析了有机物包覆层的炭化温度范围,最后用FE-SEM观察了CeO2在复合材料中的分散情况。结果表明,包覆在纳米CeO2表面的厚度约为20 nm的表面活性剂层提高了微粒的分散性,而且该包覆层在495℃时已经炭化。热力学计算的结果也表明,炭化层能与氧化膜反应,该反应提高了CeO2与基体间的润湿性,并使其均匀分布在基体合金中。