聚合物锂离子电池界面相容性的研究进展

聚合物锂离子电池作为储能装置在电子产品中具有广泛的应用前景。电极/聚合物电解质(E/P)界面相容性是影响聚合物锂离子电池电导率、安全性、机械性能的重要影响因素之一。研究E/P界面的电化学反应及形成机理,是解决相容性问题的关键。本文综述了近年来有关聚合物锂离子电池E/P界面相容性及相关研究技术的进展,并对聚合物锂离子电池界面相容性的相关研究进行了展望。     

光电催化二氧化碳还原研究进展

CO_2是最常见的化合物,作为潜在的碳一资源,可用于制备多种高附加值的化学品,如一氧化碳、甲烷、甲醇、甲酸等。传统的热催化转化CO_2方法能耗高,反应条件苛刻。因此,如何在温和条件下高效地将CO_2转化成高附加值的化学品,一直以来是催化领域的研究热点和难点之一。光催化技术反应条件温和、绿色环保。然而,纯光催化反应普遍存在太阳能利用效率有限,光生载流子分离效率低等问题。针对上述问题,在光催化的基础上引入电催化,可以提高载流子的分离效率,在较低的过电位下,实现多电子、质子向CO_2转移,从而提高催化反应效率。总之,光电催化技术可以结合光催化和电催化的优势,提高CO_2催化还原反应效率,为清洁、绿色利用CO_2提供了一种新方法。本文依据光电催化CO_2还原反应基本过程,从光吸收、载流子分离和界面反应等三个角度综述了光电催化反应的基本强化策略,并对未来可能的研究方向进行了展望。     

全固态钠离子电池硫系化合物电解质

全固态钠离子电池具有资源丰富、安全性高等优势,作为未来大规模储能的重要选择而成为近年来先进二次电池前沿研究热点。钠离子硫系化合物电解质室温离子电导率高、弹性模量高、容易冷压成型,能增强电极/电解质界面接触、减小界面阻抗、缓冲电极材料在充放电过程中的应力/应变,是全固态钠离子电池的研究重点。本文对钠离子硫系化合物固态电解质的结构及性质进行了总结,讨论了硫系化合物电解质的本征特性、与电极的界面稳定性,并介绍了硫系化合物全固态钠离子电池的研究现状,最后分析了硫系化合物电解质面临的挑战及今后的发展方向。     

PbTiO3/SrTiO3(010)异质界面上的周期性失配位错及电子富集

It is important to determine the effects of misfit dislocations and other defects on the domain structure, ferroelectricity, conductivity, and other physical properties of ferroelectric thin films to understand their ferroelectric and piezoelectric behaviors. Much attention has been given to ferroelectric PbTiO₃/SrTiO₃ or PbZr_0.2Ti_0.8O₃/SrTiO₃ heterointerfaces, at which improper ferroelectricity, a spin-polarized two-dimensional electron gas, and other physical phenomena have been found. However, those heterointerfaces were all (001) planes, and there has been no experimental studies on the growth of (010) PbTiO₃/SrTiO₃ heterointerface due to the 6.4% misfit between two materials. In this study, we selected an atomically flat (010) PbTiO₃/SrTiO₃ heterointerface grown using a two-step hydrothermal method as the research subject, and this is the first experimental report on that interface. Interfacial dislocations can play a significant role in causing dramatic changes in the Curie temperature and polarization distribution near the dislocation cores, especially when the size of a ferroelectric thin film is scaled down to the nanoscale. The results of previous studies on the effects of interfacial dislocations on the physical properties of ferroelectric thin films have been contradictory. Thus, this issue needs to be explored more deeply in the future. This study used aberration corrected scanning transmission electron microscopy (STEM) to study the atomic structure of a (010) PbTiO₃/SrTiO₃ heterointerface and found periodic misfit dislocations with a Burgers vector of a[001]. The extra planes at the dislocation cores could relieve the misfit strain between the two materials in the [001] direction and thus allowed the growth of such an atomically sharp heterointerface. Moreover, monochromated electron energy-loss spectroscopy with an atomic scale spatial resolution and high energy resolution was used to explore the charge distribution near the periodic misfit dislocation cores. The fine structure of the Ti L edge was quantitatively analyzed by linearly fitting the experimental spectra recorded at various locations near and at the misfit dislocation cores with the Ti³⁺ and Ti⁴⁺ reference spectra. Therefore, the accurate valence change of Ti could be determined, which corresponded to the charge distribution. The probable existence of an aggregation of electrons was found near the a[001] dislocation cores, and the density of the electrons calculated from the valence change was 0.26 electrons per unit cell. Based on an analysis of the fine structure of the oxygen K edge, it could be argued that the electrons aggregating at the dislocation cores came from the oxygen vacancies in the interior regions of the PbTiO₃. This aggregation of electrons will probably increase the electron conductivity along the dislocation line. The physics of two-dimensional charge distributions at oxide interfaces have been intensively studied, however, little attention had been given to the one-dimensional charge distribution. Therefore, the results of this study can stimulate research interest in exploring the influence of the interfacial dislocations on the physics of ferroelectric heterointerfaces.     

“拟双子”阴离子表面活性剂在癸烷/水界面的分子动力学模拟

采用全原子分子动力学模拟方法研究了壬基酚取代的系列烷基磺酸盐表面活性剂在癸烷/水界面的微观聚集行为,通过分析界面厚度、界面生成能和界面张力以及表面活性剂分子与水分子之间的径向分布函数和配位数,讨论了不同磺烷基链长度对壬基酚基取代烷基磺酸盐表面活性剂界面性质的影响.结果表明,磺烷基链长为12时,表面活性剂的界面张力最低,界面厚度和界面生成能最大.     

高马赫数下激波液滴相互作用的数值模拟研究

本文采用守恒清晰界面多相流数值方法模拟了超声速和高超声速环境下三维液滴的推进、变形和破碎演化过程.数值模拟结果与实验数据的一致性表明了本文所用数值方法和计算程序的准确性, 而网格无关性研究验证了采用的网格分辨率可以捕捉流场和界面的主要特征. 模拟结果验证了高韦伯数下液滴变形破碎过程所遵循的剪切诱导剥离(SIE)破碎机制, 其包含液滴的扁平化和剪切剥离两个主要特征. 而最近发现的SIE破碎机制下的循环破碎机制也在本文得到了验证, 即主液滴从球形液滴破碎为小液滴会经历多个循环重复的破碎阶段, 高韦伯数下液滴的破碎并非一次性剪切剥离的结果, 而是会发生逐层的剪切剥离和破碎. 本文还研究了马赫数对激波冲击液滴加速变形过程的影响. 结果表明, 高韦伯数下不同马赫数的液滴破碎过程具有高度一致性, 并遵循统一的SIE破碎机制.通过对液滴质心位移、速度、加速度和拽力系数的量化统计揭示其运动过程中的统一加速规律. 在激波的驱动下, 液滴并非以一个恒定的加速度做加速运动.在扁平化不明显的前期, 液滴以一个恒定的加速度做加速运动.随着液滴扁平化的发生, 迎风面积的增加导致拽力系数的增大, 进而导致液滴加速度的不断增大.      

纤维增强金属基复合材料整体蠕变性能的细观力学分析

高温下金属基复合材料的蠕变主要由基体蠕变和界面扩散蠕变两部分构成,以往的研究中常常只考虑其中一种蠕变机理,从而导致得到的规律具有较大的局限性．本文提出了一种可预测金属基复合材料整体蠕变性能的细观力学方法,同时考虑了基体蠕变和界面扩散蠕变两种蠕变机理,导出了具有张量形式并满足不可压缩性的界面扩散蠕变应变表达式．采用Mori-Tanaka法和自洽法二者结果的平均以便更准确地计算纤维中的应力,揭示了两种蠕变机理相互影响的竞争关系．研究了恒定双轴荷载下的总体蠕变和固定位移约束下的应力松弛这两种常见蠕变问题,探究了基体蠕变与界面扩散蠕变两种蠕变机理在总蠕变中发挥的作用,考察了不同加载条件和不同纤维体积分数对复合材料整体蠕变行为的影响．     

一种模拟动边界绕流的锐利界面浸入边界法

When the structural wall moves over a fixed grid, the structure coverage will change, resulting in many dead and emerging elements. To avoid the influence of malformation and reconstruction of body-fitted grids on the calculation efficiency and accuracy of the fluid-structure interaction problems with coupled boundary movement on the fixed grid, an improved numerical method for describing the interaction between an immersed rigid body and fluid based on a sharp-interface is proposed. In this method, both the fluid and solid are regarded as pure fluid domains in the whole computational domain, and the solid boundary is divided into several Lagrangian grid points. The flow parameter or velocity is reconstructed by interpolation at the interface element, which is then directly used as the boundary condition of the flow field, thus reflecting the influence of the wall boundary conditions. The method constructs the calculation structure of “virtual point, force point and vertical foot point”, and the velocity of the virtual point is obtained by bilinear interpolation. Then, the velocity of the force point is calculated by forcing the solid boundary to meet the no-slip condition, and the equations of the coupling system based on the immersion boundary method are finally solved to realize the numerical simulation of the flow with a complex moving boundary. The numerical program for this immersed boundary method is established using C++, then the accuracy and reliability of the proposed method are validated by comparison with the literature and experimental results of the basic numerical example of flow around a cylinder. Furthermore, the effects of the structural shape and the angle of attack on the trailing vortex structure, the vortex shedding frequency, and the lift/ coefficient characteristics of the flow around the elliptical cylinder have been analyzed. The anti-symmetric S-type, “P+S” Ⅰ-type and “P+S” Ⅱ-type trailing vortex shedding modes, as well as the variation laws of the vortex structure size, vortex shedding frequency and lift-drag coefficients ratio with axis ratio and angle of attack, are captured. The critical angle of attack (25°) corresponding to the maximum lift-drag ratio is determined as 25°.     

RDX基含铝炸药爆轰波结构实验研究

为了获得含铝炸药爆轰反应区附近铝粉的反应情况,对两种RDX/Al炸药和一种RDX/LiF炸药的爆轰波结构进行了测量。实验过程中,利用火炮加载产生一维平面波,通过光子多普勒测速仪测量炸药/LiF窗口的界面粒子速度。结果表明:含铝炸药爆轰波的结构与理想炸药的差异较大,其界面粒子速度曲线没有明显的拐点;反应初期,由于气相产物与添加物之间温度的非平衡性,RDX/Al界面的粒子速度低于RDX/LiF炸药的;随后,由于铝粉反应放能,RDX/Al界面的粒子速度高于RDX/LiF炸药的;微米尺度铝粉在CJ面前几乎不发生反应;2、10 μm等两种粒度铝粉的反应延滞时间小于0.8 μs;在本文中,两种粒度铝粉的反应度为16%~31%。     

儿茶素活性成分分子印迹聚合物的固相萃取研究

以表没食子儿茶素没食子酸酯(Epigallocatechin-gallate,EGCG)为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在光冷引发条件下合成EGCG分子印迹聚合物,利用该聚合物制成分子印迹固相萃取柱,用于固相萃取茶叶提取物茶多酚,对萃取柱中的清洗液、洗脱剂、上载量等进行了选择.结果表明,在萃取柱上载样品之后,先用V(甲醇):V(水)＝1:9溶液进行清洗,再用V(甲醇):V(乙酸)＝9:1混合液进行目标分子的洗脱,可以得到比较纯的目标物质EGCG(色谱峰相对峰面积达92.4%),萃取柱在上载样品并进行清洗、洗脱之后,EGCG的回收率达69.3%.分子印迹柱具有较好的稳定性和耐用性能,使用20次后其选择性识别能力仍未降低,但空白印迹柱却没有这样的选择性识别能力.