Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

Sm2O3对CuO-γ-Al2O3催化剂性能的影响

在色谱微反流动法实验装置上考察了负载Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂ＣＯ氧化活性的影响，并运用Ｘ射线衍射（ＸＲＤ）、程序升温还原（ＴＰＲ）及程序升温脱附（ＴＰＤＭＳ）技术研究了Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂的物相结构、氧化还原特性及表面氧的脱附与恢复行为的影响。结果表明，负载适量的Ｓｍ２Ｏ３对ＣｕＯγＡｌ２Ｏ３催化剂表面氧的脱出与恢复有促进作用，可使部分γＡｌ２Ｏ３相变成γＡｌ２Ｏ３和θＡｌ２Ｏ３的混合型。负载适量的Ｓｍ２Ｏ３能改善催化活性，而负载过量的Ｓｍ２Ｏ３则使ＣｕＯ催化剂上ＣｕＯ的晶粒增大，从而对催化活性起了抑制作用。     

4‘,7—二甲氧基莰非醇的合成

Ｓｉｍｍｏｎｄｓ等报道异戊烯基化的查耳酮和黄烷酮对昆虫具有拒食活性［１］，Ｅｃｈｅｖｅｒｒｉ等发现，从植物Ｐａｓｓｉｆｌｏｒａｆｏｅｔｉｄａ树脂中分离到的４，７－二甲氧基莰非醇（１）在很低的浓度下（４０μｇ／ｇ）对昆虫Ｄｉｏｎｅｊｕｎｏ的幼虫也具有...     

聚芳醚酮高温长时间下的断裂行为3．韧性－脆性断裂转变

研究了聚芳醚酮（ＰＥＫ－Ｃ）在２００℃下长时间放置过程中拉伸断裂行为的变化．通过应力－应变实验、断面形貌观察及去老化现象的研究证实，２００℃下长时间放置后的ＰＥＫ－Ｃ的拉伸断裂行为，发生韧性－脆性转变，发生这一转变的时间约在５８９小时左右．伴随１９９℃下的拉伸过程中出现的去老化现象，决定于材料发生剪切屈服形变的能力，与韧性－脆性断裂行为转变有着本质的联系．     

A convenient synthesis of 2-aryl substituted benzo[f] [1,2,4]triazolo[1,5-a]azepine derivatives

A convenient synthetic pathway to 2-aryl-5,6-dihydro-4H-benzo[f][1,2,4]triazolo[1,5-α]azepine derivatives 7 was developed. The synthesis was based on the cycloaddition of the 1,2,3,4-tetrahydronaphthalene a-acetoxy azo compounds 3 with Ar-CN in the presence of AlCl3 and the consecutive ring enlargement.     

配合物[Mn(phendione)(PDC)(H2O)2]·2H2O的合成与晶体结构

The title compound [Mn(phendione)(PDC)(H₂O)₂]·2H₂O (H₂PDC=pyridine-2，6-dicarboxylic acid) has been prepared in aqueous solution and characterized by single X-ray diffraction structure determination， elemental analysis， IR spectroscopy， and thermal analyses. The compound crystallizes in Monoclinic system， space group C2/c， a=1.017 51(11) nm， b=1.483 25(11) nm， c=1.461 21(13) nm， β=109.86(10)°， V=2.074 1(3) nm³， Z=4， F(000)=1 028， μ=0.701 mm^-1， D_c=1.609 g·cm^-3， R₁=0.028 9， wR₂=0.078 8 [I>2σ(I)]. Crystal structure reveals that complex consists of one-dimensional chain framework bridged by hydrogen bonds that formed by uncoordinated water and oxygen atom of carboxyl group in PDC^2-. Furthermore， the complexes form a three-dimensional super-molecular structure through hydrogen bonds. CCDC: 648570.     

纳米SrTiO3对高铁酸盐电化学性能影响研究

Two ferrates, K₂FeO₄ and BaFeO₄, had been prepared and characterized by XRD, IR and SEM. The electrochemical tests of the samples were carried out in the voltage range of 0.8～2.0 V and current density of 0.5～3.0 mA·cm^-2. The results indicated that performance of Zn-BaFeO₄ battery was superior to that of Zn-MnO₂ and Zn-K₂FeO₄ batteries. Nanometer SrTiO₃ prepared by Sol-gel methode with different ratio was added to the BaFeO₄ cathode in order to improve the discharge performance. The discharge capacity of the BaFeO₄ cathode was increased from 224 mAh·g^-1 to 246 mAh·g^-1 by addition of 5% nanometer SrTiO₃. The reason of enhancing BaFeO₄ electrochemical performance was discussed.     

异构化的π-丁二烯二羰基(乙氧基芳基卡宾)铁配合物的质谱研究

1964年Fischer等报道了第一个过渡金属卡宾配合物以来,为数众多的过渡金属配合物已被合成和鉴定。最近我们合成了一系列异构化的π-丁二烯二羰基(乙氧基芳基卡宾)铁配合物,并研究了它们的红外光谱和核磁共振谱。本文报道这类新型配合物的低分辨电子轰击电离(EI)质谱,探讨其可能的断裂途径。它们的EI质谱表明,存在一系列具有结构信息的特征离子,相应的特征峰有助于配合物的结构鉴定。根据红外光谱分析和X-射线晶体结构分析,这些新型配合物具有下面两种结构类型,其中3为B型结构,其它均为A型结构。     

苯并三氮唑及其羧酸酯衍生物对铜缓蚀机理的分子动力学模拟研究

用分子动力学(MD)方法, 模拟计算了5种铜缓蚀剂[苯并三氮唑(BTA)、苯并三氮唑-5-羧酸甲酯(MBTC)、苯并三氮唑-5-羧酸丁酯(BBTC)、苯并三氮唑-5-羧酸己酯(HBTC)、苯并三氮唑-5-羧酸辛酯(OBTC)]与Cu₂O晶体的相互作用. 结果发现, 中性条件下缓蚀剂分子与Cu₂O晶体的结合能均大于酸性条件下的数值, 但两种条件下结合能的大小排序均为OBTC＞HBTC＞BBTC＞MBTC＞BTA. 对体系各种相互作用以及对关联函数g(r)的分析表明, 体系结合能主要由库仑作用提供, Cu₂O晶体中的Cu原子与缓蚀剂分子中的N原子之间形成了配位键. 在与Cu₂O(001)晶面结合过程中, BTA及其衍生物分子发生了扭曲变形, 但形变能远小于体系的非键相互作用能.     

聚-γ-N-(β-丁硫基乙基)胺丙基硅氧烷钯络合物的合成及其催化性能的研究

报导了聚－γ－Ｎ－（β－丁硫基乙基）胺丙基硅氧烷和氯化钯的反应，得到固载在二氧化硅上的聚－γ－Ｎ－（β－丁硫基乙基）胺丙基硅氧烷钯络合物，并用ＸＰＳ研究其结构．选用硝基苯、烯丙基环氧丙基醚、烯丙基苯基醚、丙烯腈、烯丙基苯、苯乙烯、环己烯及丁烯等８种底物进行催化加氢，以评价其催化活性．结果表明，该催化剂催化效果良好，并且有很好的稳定性．