西佛碱大环双核钴（Ⅱ）配合物的合成,光谱及磁性

本文以２．６─二乙酰吡啶和１，３一二氨基一２一丙醇通过模板合成西佛碱大环配体Ｈ＿２Ｌ（图１），并合成了它的Ｃｏ（Ⅱ）、Ｎｉ（Ⅱ）及Ｆｅ（Ⅱ）的双核配合物，重点讨论了Ｃｏ＿２（ＨＬ）（ＣｌＯ＿４）＿２（ＮＯ＿３）·４Ｈ＿２Ｏ配合物的光谱与磁性。变温磁化率数据（４─３００Ｋ）通过用最小二乘法与理论方程拟合，得到磁参数为Ｊ＝－１．２４ｃｍ￣（－１），θ＝－０．２４Ｋ，表明配合物中ｃｏ（Ⅱ）－Ｃｏ（Ⅱ）间存在弱的反铁磁相互作用，分子间也存在反铁磁相互作用。     

Y2O2S：Eu,Mg,Ti,Tb红色长时发光材料的研究

利用高温固相反应法合成了一种新型的红色长时发光材料－Y2O2S：Eu,Mg,Ti,Tb.材料的XRD测试结果表明Eu掺杂引起Y2O2S，Eu,Mg,Ti,Tb晶胞增大，激发光谱，发射光谱和发光衰减曲线表明该材料是一种适合紫外线和可见光激发，并具有很好的长时发光性能的红色长时发光材料，热释光谱测试结果表明该材料可能具有两个较深的陷阱能级，研究了Eu,Mg,Ti,Tb的加入量对材料发光特性的影响。结果表明：Eu,Mg,Ti,Tb影响材料的初始亮度和发光时间，Eu决定材料的红色比。     

（1R,2S）或（1S,2R）—1,2—二苯基—2—氨基乙醇衍生物手性配体的合成及其用于不

重点报道了以（１Ｒ，２Ｓ）或（１Ｓ，２Ｒ）－１，２－二苯基－２－氨基乙醇衍生物手笥配体的合成及其用于不对称催化反应的研究，如去氢氨基酸的氢化，醛的乙基锌加成，酮的还原，活泼亚甲基化合物的烷基化，醛的硅腈化和瑞福马斯基反应等。研究了手性配体的结构，底物和反件等对上述反应的对映造反性和催化活性的影响。     

电化学合成铜配合物的研究

采用金属铜为"牺牲"阳极,首次在无隔膜电解槽中,电化学溶解金属铜一步制备了纳米CuO前体Cu(OEt)2, Cu(OBu)2, Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac) (acac为乙酰丙酮基).产物通过红外光谱(FT-IR)、拉曼光谱(Raman spectrum)进行表征.同时讨论了影响电合成铜醇盐及其配合物的关键因素.实验表明,防止阳极钝化,温度控制在30～50 ℃,采用有机胺溴化物为导电盐, 电极电位控制在0.8～1.2 V之间,可以提高电合成效率.实验同时表明Cu(acac)2, Cu(OEt)(acac), Cu(OBu)(acac)可作为制备含铜纳米材料前驱体.     

SYNTHESIS AND MOLECULAR STRUCTURE OF Co（Ph2pyPO—N,O）2Cl2[Ph2pyPO=DIPHENYL（2—PYRIDYL）PHOSPHINE OXIDE]

<正> Complex Co(Ph2pyPO-N,O)2Cl2 was synthesized and its crystal and molecular structure was determined. Crystal data: Co(Ph2C5H5NPO-N,O)2Cl2, Mr = 688.4, monoclinic, space group A 2/a, a = 13.085(2), b = 11.134(3), c = 21.769(4)A,β=102.29(1)°,Z = 4, V = 3098.6 A3, DC = 1.476 g/cm3, final R= 0.049 and Rw=0.057 for 2804 independent reflections. The cobalt atom in the title molecules is coordinated by two chlorine atoms and two nitrogen and two oxygen atoms from the two phosphine oxide ligands, forming a distorted octahedron.     

金属材料分析方法的选择和施行——第四讲 金属材料中钛的测定（续）

⑤方法的精密度　提供了由8家试验室协作对方法的精密度进行试验的结果。见表10。表10　DAPM光度法测定钛的精密度试验结果(n=8)Tab.10　ResulfofprecisiontestoftheDAPMphotometricmethodCRM的名称及编号证书值wTi(%)测定值wTi(%)重复性限R1(%)再现性限R2(%)低合金钢NBS19g0.0270.0280.00130.0043低合金钢NBS170a0.2810.2820.0090.0228铸铁NBS122d0.0070.0060.00190.0037高炉生铁NBS1144a0.3200.3300.01180.0168高合金钢NBS3440.0760.0790.00220.0065特种钢NBS11560.2100.2000.00540.0143[注1]　该方法系测定总钛量。试…     

Analysis of Equilibrium and Kinetics of Chromium-Fluoride Complexation from Spectroscopic Data via Chemometrics Methods

IntroductionStudies on reversible kinetic systems are consi-dered as a hotspot of chemical and biochemical kineticresearches[1,2]. Of late, some researches have been fo-cused on the simultaneous optimization of the obverseand reverse rate constants[3,4].H…     

稀土-噻吩甲酰三氟丙酮-4,4′-联吡啶-N,N′-二氧化物三元配合物的合成与表征

首次合成了稀土－噻吩甲酰三氟丙酮（ＴＴＡ）－４，４′－联吡啶－Ｎ，Ｎ′－二氧化物的三元配合物，通过元素分析，确定其组成为：Ｌｎ（ＴＴＡ）３０．５（４，４′－ｂｉｐｙＮ２Ｏ２），通过紫外、红外以及热谱分析，讨论了它们的物理化学性质。     

Rheological Behavior for Mica-filled Polypropylene Composite Melts

The study on rheological properties of a series of mica-filled polypropylene (PP) composites was carried out. The influence of surface-treatment of mica particles on dynamic rheological behavior of the composites were dealt with. The viscosity (η) and dynamic modulus ( G‘ ) of the composite melts were higher than those of PP matrix, especially those for systems treated with silane, which was attributed to the interfacial adhesion enhancement. However, surface-treatment of mica by titanate resulted in lower η and G‘, as compared with the treatment by silane. The reason for this is believed to be the formation of the mono-molecular layer on the mica surface.