5-(对羧基苯偶氮)-8-羟基喹啉与钍的显色反应及应用

研究了钍与5-(对羧基苯偶氮)-8-羟基喹啉(5-CPAHQ)的显色反应条件:在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)存在下,pH4.4-5.4缓冲介质中,形成稳定的橙红色络合物,最大吸收波长为490nm,ε=1.10×105L·mol-1·cm-1,钍在0-9μg/25mL范围内符合比尔定律。用TBP萃淋树脂分离,该方法可用于测定矿石中的微量钍。     

苯磺酰苯胺类药物理化性能的研究

利用高效液相色谱和分光光度法，研究了新合成的5个苯磺酰苯胺类化合物的酸离解常数和脂溶性，结果表明，他们具有较弱的酸性和合适的脂溶性。预计会有较好的抗肝片吸虫活性。     

二代树状碳硅烷液晶研究Ⅰ.端基含36个丁氧基偶氮苯介晶基元

用发散法合成周边含36个丁氧基偶氮苯介晶基元(M5)端基新的二代树状碳硅烷液晶(D2),并用元素分析,氢谱,激光质谱,红外,紫外,偏光显微镜,DSC和WAXD法表征.D2为向列相,与M5相同,二代树状物相态由介晶基元相态决定.D2液晶态相行为是K85N107I103N69K,其熔点比M5降低27～41℃,清亮点比M5降低17～18℃,液晶态温区比M5加宽10～23℃.二代碳硅烷(D2)与一代碳硅烷(D1)相比熔点增加2～3℃,清亮点降低26～29℃,液晶态温区减少29～31℃.在二代树状物中观察到S=+3/2的高强向错.     

Syntheses and Vasodilatory Activities of New Pyrazolo [ 4,3-d ] pyrimidin-7-ones

IntroductionAdenosine 3′,5′-cyclic monophosphate (cAMP)and guanosine 3′,5′-cyclic monophosphate(cGMP) areubiquitous second messengers that mediate biologicalresponses to a variety of extracellular cues, includinghormones, neurotransmitters, chemokines…     

二氯和邻菲罗啉二酮的镍(Ⅱ)、铜(Ⅱ)、锌(Ⅱ)配合物的合成与表征

以ＭＣｌ２和配体Ｌ（Ｌ＝１，１０－菲罗啉－５，６－二酮）为原料，合成了标题配合物ＭＬＣｌ２，Ｍ＝ＮｉⅡ，ＣｕⅡ，ＺｎⅡ，并经元素分析、热谱、ＩＲ和摩尔电导表征．三者均为四配位的电中性配合物，热稳定性高于５００Ｋ，易溶于ＤＭＦ、ＤＭＳＯ和吡啶，可溶于乙腈和水．它们在ＤＭＦ中于３５０ｎｍ和３１５ｎｍ附近显示出强的Ｍ－Ｌ荷移跃迁     

锡(Ⅳ)-偶氮邻苯二酚苯基荧光酮-吐温-80体系分光光度法测定岩石中微量锡

pH值在7.0-8.5的范围内，锡与偶氮邻苯二酚苯基荧光酮、吐温－80形成络合物，其最大吸收峰556nm，摩尔吸光系数2.9×10^5L·mol^-1·cm^-1，锡的含量在0－6μg/25mL范围内遵守比耳定律，本方法对干扰离子的影响和消除进行了研究，本方法已被用于岩石样中锡的测定，结果满意。     

3—二氯乙酰基—2，5—二甲基—2—乙基—1，3—E唑烷的一锅法合成与生物活性

利用“一锅法”合成了标题化合物，经元素分析，IR和^1H NMR确定了结构，并对产物进行了初步的生物活性测定。     

High—Efficiency Organic Double—Quantum—Well Light—Emitting Devices Using 5,6,11,12—Tetraphenylnaphthacene Sub—monolayer as Potential Well

The double-quantum-well organic light-emitting devices of indium-tin-oxide (ITO)/NPB (50nm)/rubrene (0.05nm)/NPB (4nm)/rubrene (0.05nm)/Alq3 (50nm)/LiF (0.5nm)/Al were fabricated, in which N,N-bis-(1-naphthyl)-N,N‘-diphenyl-1,1‘-biphenyl-4,4‘‘‘‘‘‘‘‘-diamine (NPB) is used as a barrier potential or hole transport layer, tris (8-hydroxyquinoline) aluminium (Alq3) used as electron transport layer, and 5,6,11,12-tetraphenylnaphthacene (rubrene) as a potential well and emitter. The brightness can reach 18610cd/m^2 at 13V. The maximum electroluminescent efficiency of the device was 6.61cd/A at 7V, which was higher than that of common dope-type devices. In addition, the electroluminescence efficiency is relatively independent of the drive voltage in the range from 5 to 13V.