藻朊酸钠／壳聚糖聚电解质复合物膜：Ⅰ.对水／有机液体系的渗透 …

制备了藻朊酸钠／壳聚糖聚电解质复合物复合膜，研究了进料液浓度，温度等对水／乙醇体系渗透汽化特性的影响；发现膜的不同表面是料液时膜的分离不同。同时，对其它水／有机液体系，该膜也具有优异的分离性能。     

分子印迹技术在样品前处理中的应用

分子印迹聚合物具有选择性高、稳定性好及制备简单的特点,可用于生物、医药、环境样品等复杂基体中痕量分析物的高选择性分离与富集,因此在样品前处理中的应用特别引人关注.本文介绍了分子印迹技术的基本原理,综述了分子印迹技术在样品前处理中应用的研究进展.     

负载型TiO2-聚酰亚胺亲水复合膜的制备与分离性能

采用溶解－流涎法，湿相转换法和干湿相转换法制轩了负载型ＴｉＯ２－聚酰亚胺亲水复合膜，采用扫描电镜，红外光谱，压汞和透气性实验等手段对该膜的孔径分布，表面结构及扩散性能进行了表征，并讨论了制备亲水对膜孔结构的影响，实验结果表明，三种膜均具有很好的亲水性能，而干湿相转换膜具有良好的孔径分布和分离性能。     

非低温法的稀有气体纯化技术概述

稀有气体广泛应用于工业生产中,如离子刻蚀、检漏等。但是它们在地球上的含量比较少,属于稀有资源,因此需要对它们进行纯化以循环再利用。首先介绍了不同气体纯化的原理,然后以实际生产中的不同稀有气体使用范围为例,说明纯化装置的设计方法和需要考虑的问题。为以后气体纯化装置的设计提供借鉴。     

Co3O4/UiO-66@α-Al2O3陶瓷膜对VOCs废气的分离催化性能

以α-Al₂O₃为支撑层, UiO-66为分离层, Co₃O₄为催化层, 构建了Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜.对其形貌结构进行了表征, 并研究了其对挥发性有机物(VOCs)的分离催化性能. 结果表明, 该陶瓷膜对喷涂行业废气中苯与吡啶两种主要成分体现出良好的分离性, 透过侧的气体中吡啶与苯的摩尔浓度比值可由给料侧的1提高至17; 体系中引入臭氧后, 给料侧苯的浓度明显降低, 其去除率可达到89%. 透过侧的吡啶去除率仅为27%, 得到了较大程度的保留, 剩余的吡啶经收集后可进行单独的深度处理. Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜在对喷涂行业废气中苯成分高效降解的同时, 能够有效解决喷涂行业废气处理过程中氮氧化物的排放问题, 有望成为喷涂行业废气预处理工艺的理想选择.     

膜分离与分离膜

本文扼要阐述了膜分离技术的基本原理、特点、内容及其近５０年来的进展和在工业上的广泛应用,系统地叙述了目前应用最广泛的有机高分子膜的。文章分析了今后膜分离的发展动向并简要介绍了我国的有关情况。     

膜分离现状及发展趋向

本文简要综述了近年来国内外反渗透、超过滤、微孔过滤、扩散渗析、电渗析、气体分离、液膜、渗透蒸发、蒸发渗透等一些主要膜分离过程,特别是有关新膜研制方面的开发现状及其发展趋向。     

Three-dimensionally ordered macro-porous Pt/TiO2 catalyst used for water-gas shift reaction

Three-dimensionally ordered macro-porous (3DOM) Pt/TiO2 catalysts were prepared by template and impregna-tion methods, and the resultant samples were characterized by using TG-DTA, XRD, SEM, TEM, and TPR techniques. The catalytic performance for water-gas shift (WGS) reaction was tested, and the influences of some conditions, such as reduction temperature of catalysts, the amount of Pt loadings and space velocity on catalytic performance were investigated. It was shown that Pt particles were homogeneously dispersed on 3DOM TiO2. The reduction of TiO2 surface was important for the catalyticperformance. The activity test results showed that the 3DOM Pt/TiO2 catalysts exhibited very good catalytic performance for WGS reaction even at high space velocity, which was owing to the better mass transfer of 3DOM porous structure besides the high intrinsic activity of Pt/TiO2.     

NEWS

膜分离技术在污水处理、中水回用、水质净化、海水淡化、血液透析和生物制药等领域得到了广泛应用。然而,膜在运行过程中出现的膜污染问题严重限制了该技术的发展。膜污染不仅会引起膜通量和分离性能下降,影响膜的长期稳定运行,而且污染后膜的清洗和更换也大大提高了运行成本。为了深入     

Micromegas prototypes with thermo-bond film separators

In this paper we report the results of Micromegas prototypes constructed by attaching micromesh to an anode using thermo-bond films. The excellent metal attaching ability and good dielectical property of this kind of film make it a promising material to be used as avalanche gap spacers. Several prototypes are successfully made. The electron transmission properties are first studied and then the gas gain is measured in argon-isobutane mixtures. The maximum gain of more than 10⁴ is easily obtained. The energy resolutions for ⁵⁵Fe 5.9 keV K_α ray can be better than 20% over one magnitude in gain for different operational gas mixtures and the best energy resolution of 13.7% (FWHM) can be achieved with the gas mixture of 94% argon concentration. The preliminary test results of the prototypes with sensitive area of 45 mm×45 mm without internal support show good uniformity across the sensitive area.