THERMAL PROPERTY, MISCIBILITY AND CRYSTALLIZATION BEHAVIOR OF POLY（3-HYDROXYBUTYRATE-co- 3-YDROXYHEXANOATE） AND POLY（BUTYLENE SUCCINATE-ADIPATE） （PHBHHX/PBSA） BLENDS

Blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(butylene succinate-adipate) (PBSA), both biodegradable semicrystalline polyesters, were prepared with the ratio of PHBHHx/PBSA ranging from 80/20 to 20/80 by melt mixing method. Differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), dynamic mechanical thermal analysis (DMA), polarizing optical microscopy (POM) and wide angle X-ray diffractometer (WAXD) were used to study the miscibility and crystallization behavior of PHBHHx/PBSA blends. Experimental results indicate that PHBHHx is immiscible with PBSA as shown by the almost unchanged glass transition temperature and the biphasic melt.     

核-壳型聚丙烯酸酯复合乳液

简述了核-壳型聚丙烯酸酯复合乳液的合成方法、形态及其影响因素与判断方法、结构与性能等方面的研究进展;认为核-壳型复合乳液膜机械性能优良的原因是:核、壳两相间存在的过渡区适当地抑制了二者的相分离。     

Aluminum Lon Removal from Monoaluminum Ovotransferrin by Pyrophosphate

The rates at which aluminum was removed from the N- and C-terminal monoaluminum ovotransferrins by pyrophosphate were evaluated by UV difference spectra in 0.01 mol/L Hepes, pH=7.4 and at 37℃. Pesudo first-order rate constants as a function of pyrophosphate concentration were measured. The results indicate that the pathways of aluminum removal are different. For the N-terminal binding site, aluminum removal follows simple saturation kinetics, while the removal of aluminum from the C-terminal binding site reverts to the combination of saturation and first-order kinetics. The saturation component is consistent with a rate-limiting conformational change in the protein as has been reported. We propose that the first-order kinetics mechanism is attributed to a pre-equilibrium process. The rate constants of saturation kinetics are accelerated from both terminals with the addition of 0.1 mol/L chloride to the monoaluminum ovotransferrin solutions, whereas the rates of the first-order kinetics are decreased for the C-terminal binding site. The effect of chloride ionic strength causes a continuing increase on kobs for the N- and C-terminal binding sites. Moreover, the kinetics behavior of the N-terminal is more easily affected by chloride than that of the C-terminal. In the experiment presumably the N-terminal site is apparently kinetically more labile than the C-terminal site.     

茂基稀土胺化物与异氰酸正己酯的反应-{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2的合成及表征

茂基稀土胺化物(MeCp)2YbNPh2(THF)与异氰酸正己酯(n-HexylNCO)按11摩尔比反应, 分离出产物{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2. 产物经元素分析和核磁共振表征, 并测定了其晶体结构. 配合物属三斜晶系, R-3空间群, 晶胞参数为a=2.9533(11) nm, b=2.9533(11) nm, c=1.5873(6) nm, V=11.9896(80) nm3, Z=9, Dc=1.562 mg·m-3, μ=3.536 mm-1 (Mo Kα), F(000)=5670, R=0.034, Rw=0.064. 该化合物具有二个对称氧桥的双分子结构, 并存在着由氮原子向中心金属镱分子内配位而形成的三环骨架, 中心金属镱的配位数是九, 整个分子呈中心对称.     

一种新型钛体系（Ⅳ）──α－酮酸钛酸酯与锂试剂的还原反应

一种新型钛体系（Ⅳ）──α－酮酸钛酸酯与锂试剂的还原反应段新方，尹承烈（北京师范大学化学系，北京，１００８７５）关键词加成，还原，钛酸酯，交换反应由于钛的优良调整作用，使得锂试剂ＲＬｉ不仅可以和α－酮酸钛酸酯ＡｒＣＯＣＯＯＴｉ（ＯＲ１）３中的酮发生加...     

条带织构装饰技术观察含T─型液晶基元的热致性聚芳酯液晶态的向错

采用条带织构装饰新技术研究了含Ｔ─型液晶基元的热致性聚芳酯液晶态的向错形态．经过培养的液晶样品无需剪切，淬火后便可呈现出围绕向错点取向排列的条带织构，而条带织构长轴的垂直方向正代表了液晶基元的指向矢方向，这样，在普通偏光显微镜下就能直接观察到这些条带织构装饰的强度Ｓ＝±１／２和Ｓ＝±１的向错，并观察到Ｓ＝－３／２的高强度向错和闭环状的反转壁．     

高折光指数光学树脂的合成——相转移法合成不饱和硫醇酯单体的条件控制

采用正常的低温相转移催化（ＰＴＣ）和反滴碱溶液ＰＴＣ法分别合成了含硫双烯ＭＥＳＤＭＡ和单烯ＭＥＰＳＭＡ．１Ｈ ＮＭＲ分析证明ＭＥＳ中的杂质主要是由原料ＴＤＧ引入的．对含单个巯基的ＭＥＰＳ的正常ＰＴＣ酯化接枝双键，因存在巯基和不饱和双键的加成反应而导致失败．作者最终得到了折光指数在１６２５以上的ＭＥＳＤＭＡ／ＭＥＰＳＭＡ共聚物．     

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响王卫华，贝建中，王智峰，王身国（中国科学院化学研究所北京１０００８０）关键词聚己内酯聚醚嵌段共聚物，共混物，电子能谱，表面性质，药物释放行为聚己内醋（ＰＣＬ）具有优良的药物通透性和生物相容...     

溶剂蒸气对聚对苯二甲酸乙二酯作用的差示扫描量热研究

用差示扫描量热(DSC)研究了几种有机溶剂蒸气对聚对苯二甲酸乙二酯(PET)的作用,表明可分为反应性的和非反应性的两种。同时,对于非反应性的作用,依冷结晶峰面积的变化,又可分为三种类型:冷结晶峰面积不变,经诱导期后下降,无诱导期而迅速下降。双冷结晶峰现象在一些非反应性溶剂处理过的PET试样的DSC曲线也观察到。     

[Ni(NH_2NHCO_2CN_3)_3](NO_3)_2·H_2O的制备、具体结构和热分解机理

由硝酸镍水溶液和肼基甲酸甲酯（NH_2NHCOOCH_3, MCZ）的水溶液反应,制备 出未见文献报道的配合物[Ni(MCZ)_3]-(NO_3)_2·H_2O。晶体结构测定结果表明, 该晶体属单斜晶系,P2_1/n空间群,晶体学参数为：a = 1.3681 (2) nm,b = 0. 8188 (1) nm,c = 1.6029 (4) nm,β = 92.16 (2)°,V = 1.7943 (6) nm~3, D_c = 1.744 g·cm~(-3),Z = 4,F(000) = 976,μ(Mo Kα) = 1.166 mm~(-1) 。结构采用全矩阵最小二乘法优化,除氢原子采用各向同性热参数外,其它非氢原 子均采用各向异性热参数修正,最终偏离因子R_1 = 0.0337,wR_2 = 0.0857。在 该配合物分子中,肼基甲酸甲酯作为双齿配体,由羰基氧原子和端基氮原子与Ni~ (2+)配位,形成五元平面螯合环,配合物分子中共有三个这样的螯合环,中心离子 为六配位八面体构型。配合物的外界是两个硝酸根离子和一个水分子,通过库仑力 和氢键与内界结合在一起。采用TG-DTG,DSC,IR等表征了标量化合物的热稳定性 。在程序升温条件下,该配合物的热分解过程是由一个弱的吸气热过程和三个较强 的连续的放热过程组成的,由TG-DTG和IR分析结果证明,在325 ℃时的最终分解产 物为NiO,得到了化合物的分解机理。