纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

 用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c^app约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.     

新型高吸水聚合物凝胶型屏蔽暂堵剂MTC-1的合成及性能

以丙烯酸（AA）、丙烯酰胺（AM）、2-丙烯酰胺基-2-甲基丙磺酸（AMPS）为原料，蒙脱土（MMT）为改性剂，过硫酸钾和无水亚硫酸氢钠为氧化还原引发体系，六亚甲基四胺（C₆H₁₂N₄）为交联剂，采用水溶液聚合法合成了一种新型高吸水聚合物凝胶型屏蔽暂堵剂（MTC 1），其结构经IR表征。在最优合成条件（AM/AMPS/AA=11/7/1, m/m/m，引发剂加量0.6 wt%，于45 ℃反应2.5 h）下，MTC-1的最大吸水倍率为1006倍。岩心流动实验结果表明：MTC-1的堵水性能较高，封堵效率达到83.72%。     

聚合物驱蚊剂的慢释放研究

本文研究了丙烯酸酯共聚物载体对驱蚊剂N,N-二乙基间甲苯酰胺(DETA)慢释放行为的控制,探讨了单体配比、共聚物分子量以及DETA含量对释放速率的影响。结果表明。增加亲水性单体丙烯酸(AA),可提高DETA的释放速率;降低共聚物数均分子量,会减少DETA的释放量;剂型中DETA含量与释放量存在线性正比关系,但DETA的含量增加并不导致释放有效时间的线性增加。本文还就共聚物膜的透湿性和碱溶性作了研究,亲水性单体AA的增加同样导致透湿性和碱溶性的增加。制备的聚合物驱蚊剂经现场应用试验,表明具有良好的长效驱蚊特性。     

热致液晶共聚酯对聚丙烯结晶的诱导作用

用差示扫描量热法和光学解偏振法研究了热致液晶性芳香共聚酯与聚丙烯共混物的等温和非多温结晶行为.结果表明,这一热致液晶聚合物对聚丙烯结晶有诱导成核和加速作用.当共聚酯含量在2-5％之间时,聚丙烯的结晶速率最快.偏光显微镜的观察揭示出在聚丙烯熔体中原位形成的液晶聚合物微纤诱导了聚丙烯横穿晶的形成.     

双-单齿芳香酰胺型配体桥联La3＋一维配位聚合物的合成与晶体结构

通过硝酸镧和双-单齿芳香酰胺型配体L {L＝1,4-双[(2'-苄胺甲酰基苯氧基)-甲基]苯}之间的反应得到了配位聚合物{[La(NO₃)₃]₂•L₃}_n, 并用X射线单晶衍射测定了配合物的晶体结构. 配合物为三斜晶系, _P1空间群, 晶胞参数a＝1.1298(2) nm, b＝1.2689(1) nm, c＝2.1030(3) nm, α＝81.189(9)°, β＝80.95(1)°, γ＝65.832(9)°, V＝2.7032(6) nm³, Z＝2, R＝0.0267, wR＝0.0679, La^3＋为9配位, 呈变形的三帽三角棱柱配位构型. 配合物通过配体的桥联作用形成一维环链相间的配位聚合结构, 由于相邻链间不存在氢键和π-π堆积作用, 所以配合物是以单链形式堆积排列.     

配位聚合物{[Co2(HBTC)2(H2O)6]·C4H10N2·2H2O}n的水热合成、结构表征及荧光性质

采用水热法合成了配位聚合物[Co2(HBTC)2(H2O)6]·C4H10N2·2H2O}n(H3BTC为1,3,5-均苯三羧酸,C4H10N2为哌嗪),通过X射线单晶衍射、红外光谱和荧光光谱进行表征,并用TGA研究了该配位聚合物的热稳定性.晶体属三斜晶系,P1空间群,a=1.05437(9)nm,b=1.05485(9)nm,c=0.71482(5)nm,α=102.4623(28)°,β=91.3500(42)°,γ=111.0186(29)°,V=0.72018(10)nm3,Mr=764.37,Dc=1.762g·cm-3,Z=1,μ(MoKα)=1.25mm-1,F(000)=394,R=0.0307,wR=0.0815.晶体的基本构建单元中包含2个Co()中心、2个配位的HBTC分子和6个配位的水分子.基本构建单元通过相互链接形成具有“Z”型结构的一维配位聚合链,链间通过两种不同的氢键(O—H…O和N—H…O)相互作用,进而形成具有三维骨架结构的微孔晶体,微孔大小为0.71nm×0.82nm.荧光光谱表明,常温下用λex=312nm的光激发后,配位聚合物在329nm处出现强烈的荧光发射.     

Synthesis of Lanthanide Coordination Polymers with Benzophenone-4,4′-dicarboxylate： Effect of Lanthanide Contraction on Structures

Four lanthanide coordination polymers with benzophenone‐4,4′‐dicarboxylic acid (H₂bpndc) and 1,10‐phenanthroline (phen), [Ln₂(bpndc)₃(phen)] (Ln=La (1), Pr (2) and Tb (3)), [Yb(bpndc)₁₅(phen)].05H₂O (4) were obtained through solvothermal synthesis. The crystallographic data show that 1, 2, and 3 are isostructural, the Ln(III) ions in 1, 2 and 3 are all eight‐ and ten‐coordinated, respectively, and thus the Ln(III) ions are connected by bpndc ligands, resulting in an interpenetrating 3D structure. While in 4, the Yb(III) ions are eight‐coordinated and connected by bpndc ligands into a 3D structure with 1D rhombic channels, which result from the effect of lanthanide contraction from La(III) to Yb(III) ions, and the bpndc ligands in 1, 2, 3, and 4 display three types of coordination modes.