The production of slow particles in 16O－Em interactions at 4.5 A GeV/c

A sample of 1233 events is used to study the general characteristics of {}^{16}O－Em interactions at 4.5 A GeV/c. Multiplicity and angular distributions of slow particles and correlations among them are discussed. The present data are compared with the corresponding results from the interactions of other projectiles at the same energy and also the same projectile at different energies. The results indicate that black particle production is independent of the energy and mass of the projectile, but for grey particles it is dependent on the mass of projectile.     

A Facile Synthesis of Silver-Coated Composite Particles by Swelling Surface Method

We report a facile and rapid method for fabrication of composite particles consisting of a polystyrene (PS) core and a uniform silver shell. The process involves the PS colloid surface swelling, the anchoring of silver ions and nanoparticles onto the surfaces, and the subsequent growth of metal seeds in a short period. The present approach has the advantages of simplicity and high efficiency. The TEM images show the morphology of the obtained PS core-silver shell particles, and their chemical composition and crystallinity are analysed by x-ray diffraction. To our knowledge, this is the first study based on swelling PS surface for synthesis of silver-coated PS particles and may be implemented for preparing other metal-coated PS particles.     

用脉冲激光同轴全息技术测量微射流

强冲击载荷下自由表面的粒子喷射现象还没有被清楚认识，很难从理论上给以准确的计算模型，因而从实验测定材料在冲击载荷下自由面面喷射物质的分布和粒子尺寸大小就显得非常重要。测量微粒场的脉冲激光同轴全息技术，具有在纳秒或更在短时间内“固化”运动微粒场、测量精度高、景深长、光路简单和获得的信息量大等优点。这些优势使得脉冲激光同轴全息技术成为研究微喷射场的重要测试手段之一。     

镅污染手套箱系统的去污技术

考虑到手套箱系统的主要污染核素为^239Pu，^241Am，^3H和U，其中^239Pu，^241Am属α长寿命极毒核素，很容易产生放射性气溶胶。在手套箱系统退役过程中，手套箱系统的拆除解体前后均应采用行之有效的方法进行去污，最大限度的减少放射性物质对环境的污染。文中根据可剥离膜去污技术、电解去污技术、导电高分子聚合物导电机理以及超声波去污技术，针对镅污染手套箱拆下部件的污染情况和材质特点，采取单独使用和组合使用的方法进行相应的去污技术研究。     

Fabrication of Dendrimer－like PAMAM Based on Silica Nanoparticles

A G 4.0 dendrimer-like poly (amido amine) (PAMAM) based on silica nanoparticles was fabricated via a divergent approach.It was built from γ-aminopropyi silica nanoparfides (APSN) core via repetitive addition of acrylate (MA) and hexylenediamine (HDA). FT-IR and EA were used to monitor the progress of dendrimer during each step. The amino group content of the resulting product increased from 0.49 to 3.72 mmol/g after the 4th generation. In addition, the percentage of grafting increased with increasing generation and reached to 65.9% after 4th generation. It was found that the resulting silica nanoparticles could be dispersed in methanol with a mean hydrodynamic particle diameter of 152.7 nm although the silica nanoparticles had agglomerated during the storage period.     

Atomic-scale simulation of nano-grains:structure and diffusion properties

Nanograins are characterized by a typical grain size from lto 100 nm.Mclecular dynamics aimubations have been carried out for the nanograin sphere with the diameters from 1.45 to 10.12 nm.We study the influence of grain size on structure and diffusion properties of the nanograins.The results reveal that as the grain size is reduced,the fraction of grain surface increases significantly,and the surface width is approximately constant；the diffusicn coefficlent is increased sharply,and the relation of the diffusion coefficient and the grain size is close to exponential relation below 10nm.     

强场物理与快点火靶的制备

采用本体聚合技术合成全氘代聚苯乙烯（DPS），所得聚合物分子量约250000，分散度约3，氘代率为98．7％。采用热诱导相分离技术制备全氘代聚苯乙烯泡沫。在室温溶解DPS于溶剂中，然后转入轴向冷却模具，进行单向冷却，直到溶剂完全冷冻，最后取出冷冻样置于冷冻干燥仪中进行冷冻干燥，待溶剂完全脱出后即得泡沫。通过对二恶烷／环己烷混合溶剂相图，以及PS一混合溶剂体系的相图的测定，     

袁家骝和他的科学贡献

1 生平 美籍华人、世界著名高能物理学家袁家骝先生,于2003年2月11日下午在北京协和医院逝世,享年91岁[1].     

双维位置灵敏CsI(Tl)探测器

描述了一种双维位置灵敏CsI(Tl)探测器.用3组分α源测量该探测器得到的位置分辨为0.81mm(FWHM),对于69MeV/u ³⁶Ar能量分辨为0.9％(FWHM).在RIBLL的ΔE-E粒子鉴别望远镜中常常作为E探测器.由于CsI(Tl)晶体对不同的粒子的能损-光输出的非线性,需要针对不同离子对CsI探测器作能量-光输出校正曲线.     

有限温度下的K介子凝聚

我们把Brown等讨论在零温时K介子凝聚的工作推广到有限温度.结果表明温度对于原子核的临界密度影响不大,新物质相有可能在重离子反应中形成.