SYNTHESIS OF POLYMER—SUPPORTED PALLADIUM CATALYSTS AND THEIR CATALYTIC BEHAVIOR FOR THE SELECTIVE HYDROGENATION OF MESITYL OXIDE

Copolymer of styrene-divinylbenzene in bead from was made by suspension polymerization.After chloromethylation and amination,five kinds of polymeric amines were thus obtained.These polymers were reacted with palladium chloride,and were then reduced.The polymer-supported catalysts synthesized above were used to catalyze the selective hydrogenation of mesityl oxide under reaction conditions of 80℃ and 10kg/cm^2,using methanol as a solvent.The catalytic activity and MIBK(methyl isobutyl ketone) formation selectivity of the catalysts were examined.     

Ti－Si沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化

Ｔｉ－Ｓｉ沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化夏清华，王公慰，应慕良，郑禄彬（中国科学院大连化学物理研究所，大连１１６０１２）关键词Ｔｉ－Ｓｉ沸石催化剂，Ｈ_２Ｏ_２氧化剂，环己醇氧化，环己酮肟化．１．前言环己酮肟是生产ε－己内酰胺的关键中...     

担载型过渡金属催化剂上CH4＋C2H4→C3H8反应的初步研究

担载型过渡金属催化剂上ＣＨ４＋Ｃ２Ｈ４→Ｃ３Ｈ８反应的初步研究阎子峰薛锦珍沈师孔①王弘立（中国科学院兰州化学物理研究所羰基合成与选择氧化国家重点实验室，兰州７３００００）关键词甲烷同系化过渡金属催化剂乙烯１前言在均相催化体系中，甲烷与其它饱和烃类的反...     

一维螺旋状3，6-哒嗪二甲酸镉(Ⅱ)配位聚合物的合成与结构

Using the ligand pyridazine-3，6-dicarboxylate (H₂pzdc)， a coordination polymer [Cd₂(pzdc)₂(H₂O)₄] was synthesized and characterized by elemental analysis， thermal analysis， IR and single-crystal X-ray diffraction. The complex crystallizes in the tetragonal system with space group I4₁/a. The crystallographic data are: a=1.470 6(4) nm， c=1.489 8(6) nm， V=3.222 0(19) nm³， Z=16， μ=2.725 mm^-1， D_c=2.594 g·cm^-3， R₁=0.017 8， wR₂=0.044 6. In the complex， the cadmium(Ⅱ) ions with the eight-coordinated dodecahedral geometry are linked by the pzdc ligands to generate one-dimensional chains， which are associated into the three-dimensional architecture via O-H…O hydrogen bonding. CCDC: 658853.     

负载杂多酸催化剂H4SiMo12—nWnO40／SiO2的表征

合成H4SiMo12-nWnO40(n=0,6,12)的SiO2负载样品，XRD、TEM、LRS测定结果表明杂多酸在低负载量时在载体表面高度分散，但仍保持Keggin 单元结构，然后随负载量的增加逐渐聚集成较大的晶粒。XPS结果显示杂多酸同载体之间有一定的相互作用，但负载化对杂多酸的热稳定性影响不大。负载化使杂多酸在载体表面分散而提高其对异丙醇脱水的催化能力，当杂多酸在载体表面聚集形成较大晶粒后活性不再上升。吡啶吸附红外光谱结果显示负载样品同时具有B酸和L酸中心，异丙醇脱水催化反应发生在B酸位上。     

晶化温度对中孔分子筛（M41S）结构转变的影响

在低表面活性剂浓度及低表面活性剂与氧化硅比的条件下，研究了十六烷基三甲基溴化铵－硅酸钠体系中晶化温度对中孔分子筛Ｍ４１Ｓ材料结构转变的影响。结果有，晶化温度提高至１３５℃改变了原六方晶相ＭＣＭ－４１的结构，晶化温度提高到１５０℃后，中孔结构六方ＭＣＭ－４１晶格转变为变不稳定的层状相，