Novel preparation of NaA/carbon nanocomposite thin films with high permeance for CO2/CH4 separation

Novel NaA/carbon nanocomposite thin films were successfully prepared on a porous a-Al2O3 substrate by incorporatingnanosized NaA zeolite into novolak-type phenolic resin.The prepared films were characterized by XRD,SEM and single gaspermeation tests.The NaA zeolite/carbon nanocomposite thin films exhibited that the ideal separation factor of CO2/CH4 was 28.4and the carbon dioxide flux was 3.39*10-7mol/(Pa m2s)at room temperature and under a pressure difference of 100 kPa,whichwas two orders of magnitude higher than that of pure carbon membrane prepared at the same procedures and conditions as those ofcomposite films.From the SEM images,the films were continuous and highly intergrown.Compared with carbon membranes,thethickness of nanocomposite films was drastically decreased,which was helpful to reduce the diffusion resistance and increase theflux of gas permeance.     

Electrospun nanofibers of poly（vinyl pyrrolidone）/Eu^3＋ and its photoluminescence properties

Nanofibers of poly（vinyl pyrrolidone） （PVP）/Eu^3＋ with diameters of 300-900 nm were prepared by using sol-gel processing and electrospinning technique. The products were characterized by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, and photoluminescence （PL）. The results indicated that, Eu^3＋ was successfully embedded in the onedimensional hybrid nanofibers, and the PVP/Eu^3＋ hybrid nanofibers had favorable photoluminescence properties.     

Synthesis of polypiperazine-amide thin-film membrane on PPESK hollow fiber UF membrane

A new interfacial polymerization (IP) procedure is developed in order to synthesize polypiperazine-amide thin-film membrane on the inner surface of poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber ultrafiltration (UF) membrane.A hollow fiber composite membrane with good performance was prepared and studied by FT-IR and scanning electron microscopy.     

CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLYPROPYLENE FILLED WITH SiO2 NANOPARTICLES

Oleic acid （OA）-modified SiO2 （OA-m-SiO2） nanoparticles were prepared using surface modification method. Infrared spectroscopy （IR） was used to investigate the structure of the OA-m-SiO2 nanoparticles, and the result showed that OA attached onto the surface of SiO2 nanoparticles through esterification. Effect of OA concentration on the dispersion stability of OA-m-SiO2 in heptane was also studied, and the result indicated that OA-m-SiO2 nanoparticles were dispersed in heptane more stably than the unmodified ones. OA-m-SiO2 nanoparticles can also be dispersed in polypropylene （PP） matrix in nano-scale. The effect of OA-m-SiO2 on crystallization of PP was studied by means of DSC. It was found that the introduction of OA-m-SiO2 resulted in significant increase in the crystallization temperature, crystallization degree and crystallization rate of PP, and OA-m-SiO2 could effectively induce the formation of β-crystal PP. Effect of OA-m-SiO2 content on mechanical properties of PP/OA-m-SiO2 nanocomposites was also studied. The results show that OA-m-SiO2 can significantly improve the mechanical properties of PP.     

A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.     

环境水样中硒形态分析的样品预处理

综述了近几年来测定环境水样中硒的样品前处理方法,主要包括样品消解,加入基体改进剂和分离富集3个方面。消解法中主要使用湿法消解;加入基体改进剂适用于石墨炉原子吸收光谱法的样品预处理,可以提高硒的灰化温度,减少硒的损失以及样品中基体的干扰;固相萃取法是萃取法的主要使用手段。     

表面修饰CdS和(CdS)ZnS纳米晶的性能研究

在水相中合成了CdS纳米微粒,以ZnS对其进行表面修饰,得到具有核壳结构的(CdS)ZnS水溶性纳米晶。采用红外光谱、X射线衍射(XRD)、透射电镜(TEM)表征其粒度和形貌,紫外-可见吸收光谱(UV)、荧光光谱表征其光学特性。制得的CdS近似呈球形,直径为8nm;CdS纳米颗粒表面经ZnS修饰后,其荧光发射峰强度显著增强,表面态发射减弱。     

聚合物纳米复合电介质

聚合物纳米复合材料能够发挥纳米材料在电、磁、光等方面的优越性,也具有聚合物的易成型等方面的优点,正成为电介质领域研究的热点.本文综述了聚合物纳米复合材料在介电性能方面的研究概况,主要涉及了电导、介电强度与空间电荷、介电常数、介电损耗以及局部放电等方面的研究.最后展望了今后的研究方向.     

豆腐生产过程中微量元素硒分布特性研究

为确定以不同硒含量的大豆为原料生产豆腐过程中硒分布特性,用石墨炉原子吸收分光光度法对该过程中各种产物的硒含量进行了分析研究。结果表明,以硒含量分别为0.692、2.561、2.801 mg/kg的大豆为原料生产得到的豆腐、黄浆水、豆渣的硒含量分别为:0.089、0.250、0.138 mg/kg,0.462、0.760、0.507 mg/kg和0.532、0.764、0.524 mg/kg。豆腐生产过程中,以低硒大豆为原料生产豆腐,硒总回收率为75.59%;采用富硒大豆为原料生产,硒的回收率分别达到87.37%、87.20%;生产过程中豆腐、黄浆水和豆渣中硒含量占总回收硒的比率分别为39.01%～49.97%、23.92%～29.89%、26.11%～30.92%。     

Preparation and Characterization of Nano-ZnFe2O4/TiO2 Films

The nano-ZnFe2O4/TiO2 films possess the functions of desulfurization and degradation for organic pollutants. The sols of ZnFe2O4/TiO2 were prepared by sol-gel method and coated on glass and porous ceramic by vertical coating and dipping-lift processes, respectively, and the samples were obtained after drying and sintering. The composition, appearance, absorption spectrum of the films, and the influence of the film on porous ceramic performances were analyzed using SEM, AFM, UV-Vis spectrometer, and mercury porosimeter, respectively, to determine the operation parameters of the multifunction porous ceramic elements for gas-purification.