Tm3+/Yb3+ ∶LaF3纳米体系中掺杂Yb3+ 离子对Tm3+ 离子荧光发射的影响

为研究Yb³⁺离子浓度变化对Tm³⁺离子在蓝色波段荧光强度的影响,以NaF和La(NO₃)₃为原料,采用水热法制备了Tm³⁺和Yb³⁺共掺的Tm³⁺/ Yb³⁺∶LaF₃纳米颗粒.用X射线衍射对LaF₃纳米颗粒进行表征的结果显示,纳米晶体结构呈六方相.透射电镜的观测结果显示,纳米颗粒样品大小均匀、分散性良好.在波长为800 nm的激光激发下,观测到了上转换蓝光发射,其中包括波长为474 nm和479 nm的较强的荧光辐射(相应的跃迁为1G4→3H6)和波长位于450 nm的强度较弱的荧光发射(相应的跃迁为1D2→3F4).通过观测不同Yb³⁺离子浓度条件下共掺Tm³⁺/Yb³⁺∶LaF₃样品的荧光光谱,研究了Yb³⁺离子掺杂浓度对于Tm³⁺离子的荧光发射的影响,并探讨了产生这种现象的原因.研究结果显示,对于1G4→3H6跃迁产生的荧光发射(474 nm),当Yb³⁺离子浓度增大时,反向能量传递速率的增加导致了荧光强度的增大.然而,当Yb³⁺离子浓度增大到一定程度时,Yb³⁺离子激发态能级寿命的减少将引发荧光强度的下降.相比较而言,Yb³⁺离子的浓度的变化对于1D2→3F4跃迁产生的位于450 nm处荧光强度的影响较弱.     

制备条件对纳米晶吸收剂的吸波性能影响的实验研究

采用柠檬酸盐溶胶凝胶法制备出不同Co掺杂的Ba纳米晶铁氧体吸收剂,分析了制备条件对其物性、吸波性能等的影响,确定了最佳制备工艺条件. 研究了粒径对纳米晶吸波性能的影响,同时还测试了纳米晶吸收剂的雷达波吸收性能. 结果表明,纳米晶吸收剂是一种性能优良的雷达波吸收材料. 关键词： 纳米晶吸收剂 烧结温度 溶胶凝胶法     

Dynamic Fracture Toughness and Failure Mechanisms of ZnO Whiskers Secondary Reinforced Composites

Quasi-static and dynamic fracture properties and damage mechanism of glass fiber polymer composites embeaaea with different mass percentages of ZnO whiskers are investigated by using an Instron Testing machine and a Split- Hopkinson pressure bar. According to the experimental results and linear fracture mechanics, the quasi-static fracture toughness Kic and the dynamic fracture toughness Kid under various impact velocities of specimens are obtained. Fracture mechanism is investigated by fractography analysis with a scanning electron microscope. The experimental results show that the mass percentage of ZnOw has little influence on the quasi-static fracture toughness, but a little influence on the dynamic fracture toughness and time of initial fracture point of specimens by the reason of various fracture mechanisms.     

a-C:N:H纳米尖端荧光产生的机理

用CH4,H2和NH3为反应气体,利用等离子体增强热丝化学气相沉积在沉积有碳膜的Si衬底上制备了a-C:N:H纳米尖端,并用扫描电子显微镜和微区Raman光谱仪对碳膜和纳米尖端进行了表征。结果表明:Raman谱中含有与碳和氮相关的峰,且纳米尖端的Raman谱比碳膜的Raman谱有很强的荧光背景。Raman谱中的峰说明沉积的碳膜和纳米尖端是a-C:N:H薄膜和a-C:N:H尖端。a-C:N:H纳米尖端的Raman谱中强荧光背景的产生表明其在激发光源照射的过程中发射了强荧光,对a-C:N:H纳米尖端产生强荧光的机理进行了探讨。     

燃烧的热力波电池

麻省理工学院的一个美、韩科学家小组在2010年3月7日出版的Nature上发表题为< Chemically driven carbon-nanotube-guided thermopower waves >(用化学方法驱动碳纳米管传导热力波)的论文.该小组在论文中称发现了一种前所未见的现象,在化学反应中强大的能量波可以在微小的多层纳米碳管中暴走,并引发高能量密度的电效应.他们将这个现象冠名为热力波(Thermopower Wave).     

Maximal Heat Generation in Nanoscale Systems

We investigate the heat generation in a nanoscale system coupled to normal leads and find that it is maximal when the average occupation of the electrons in the nanoscale system is 0.5, no matter what mechanism induces the heat generation.     

Dependence of Nanofluid Viscosity on Particle Size and pH Value

We investigate the viscosity of silicon dioxide nanofluid at different particle sizes and pH values considering nanoparticle aggregation. The experimental and simulation results indicate that nanoparticle size is of crucial importance to the viscosity of the nanofluid due to aggregation. As the nanoparticle size decreases, the viscosity becomes much more dependent on the volume fraction. Moreover, when the nanoparticle diameter is smaller than 2Ohm, the viscosity is closely related to the pH of the nanofluid, and fluctuates with pH values from 5 and 7.     

La-Ce-TiO2纳米光催化剂的溶胶-微波法合成、谱学表征及其活性研究

以钛酸四丁酯为原料,采用溶胶-微波法(Sol-Microwave Method)合成了镧和铈共掺型纳米TiO2粉体(La-Ce-TiO2),借助XRD、XPS和UV-Vis等测试手段对其进行了表征,并以甲基橙为模型污染物考察了掺杂量对样品光催化活性的影响规律.XRD分析表明,所得粉体均为锐钛矿相纳米TiO2,且稀土元素镧和铈掺杂后纳米TiO2特征衍射峰宽化,强度降低;XPS分析表明,镧和铈掺杂后样品表面存在大量的氧缺位;UV-Vis吸收光谱表明,所得粉体在400 nm以下均有连续宽化的吸收带,且La和Ce掺杂后样品对光的吸收显著增强,这足由于La(Ⅲ)-O荷移跃迁以及Ce(Ⅳ)f→d跃迁和Ce(Ⅳ)-O荷移跃迁所致;光催化实验表明,La和Ce共掺杂能显著提高纳米TiO2的光催化活性,其中当La(Ⅲ)和Ce(Ⅳ)掺杂量分别为2%和0.04%时,纳米TiO2光催化剂具有较高的催化活性,自然光照射下光催化氧化处理卷烟厂蒸叶车间废水,效果较好,废水COD去除率达到86.11%.     

532-nm picosecond pulse generated in a passively mode-locked Nd:YVO_4 laser

A diode-pumped continuous-wave （CW） mode-locked Nd：YVO4/KTP green laser with semiconductor saturable absorber mirror （SESAM） is demonstrated. The maximum output power of CW mode-locked green laser is obtained to be 552 mW at the incident pump power of 7.25 W, corresponding to an opticai-optical conversion efficiency of about 7.6%. The 532-nm CW mode-locked pulse duration is estimated to be about 8.4 ps with the repetition rate of 87 MHz.     

He离子注入的尖晶石中Au纳米颗粒的合成研究

利用20 keV的He离子注入表面蒸镀了Au薄膜的尖晶石（MgAl2O4）样品, 随后对注入样品进行了退火处理。 在紫外可见光谱上观察到了由于金属纳米颗粒的存在而引起的较强的表面等离子体共振吸收峰, 提供了材料中金属纳米颗粒形成的光谱证据。 并对形成的Au纳米颗粒的尺寸随退火温度以及He注入剂量的变化进行了研究。 Spinel deposited with a thin Au film was implanted with helium ions, and annealed in vacuum condition subsequently. The surface Plasmon resonance absorbance peak due to the existence of metallic nanoparticles in the dielectric matrix was observed on the Ultraviolet Visible Spectrometry, indicating the formation of metallic nanoparticles in spinel. The dependence of Au particles size with annealing temperature and implantation doses was also investigated.