Nano-tribological study on a super-hydrophobic film formed on rough aluminium substrates

A novel super-hydrophobic stearic acid (STA) film with a water contact angle of 166^o was prepared by chemical adsorption on aluminum wafer coated with polyethyleneimine (PEI) film. The micro-tribological behavior of the super-hydrophobic STA monolayer was compared with that of the polished and PEI-coated Al surfaces. The effect of relative humidity on the adhesion and friction was investigated as well. It was found that the STA monolayer showed decreased friction, while the adhesive force was greatly decreased by increasing the surface roughness of the Al wafer to reduce the contact area between the atomic force microscope (AFM) tip and the sample surface to be tested. Thus the friction and adhesion of the Al wafer was effectively decreased by generating the STA monolayer, which indicated that it could be feasible and rational to prepare a surface with good adhesion resistance and lubricity by properly controlling the surface morphology and the chemical composition. Both the adhesion and friction decreased as the relative humidity was lowered from 65% to 10%, though the decrease extent became insignificant for the STA monolayer. The project supported by the National Natural Science Foundation of China (50375151, 50323007, 10225209) and the Chinese Academy of Sciences (KJCX-SW-L2)     

密封容器中后处理制备Tl2Ba2CaCu2Oy高温超导薄膜及其性能研究

以铝酸镧（001）单晶为基片，采用两步法制备Tl2Ba2CaCu2Oy（Tl 2212）高 温超导薄膜.首先，利用脉冲激光沉积（PLD）工艺沉积Ba2CaCu2Ox非晶前驱体薄膜；然后，前驱体薄膜在高温（720—850℃）下密封钢容器里铊化结晶形成Tl 2212薄膜.XRD结果表明Tl2212 薄膜是沿c轴方向生长的，其相组成为Tl 2212，摇摆曲线（0012）的半高宽为0.72° ，SEM图像显示其表面光滑平整，其零电阻温度为106.2K. 关键词： Tl 2212超导薄膜 脉冲激光沉积     

爆炸焊接参数的计算机辅助设计

 根据爆炸焊接理论，综合分析了相关爆炸焊接参数的计算方法，利用Visual C++语言编制了爆炸焊接参数计算机辅助设计程序，该程序采用菜单和视图形式对输入、输出命令结果进行操作，方便直观。与有关实验结果的对比表明，计算所给出的焊接窗口及最佳焊接参数具有很高的准确度。爆炸焊接CAD方法对于减少实验次数，摆脱经验设计方法，选择最佳焊接参数将是非常有用的工具。     

Kirchhoff方程的相对常值特解及其Lyapunov稳定性

对于超细长弹性杆静力学的Kirchhoff方程，用动力学的概念和方法研究其常值特解 和稳定性问题.计算了Kirchhoff方程相对固定坐标系、截面主轴坐标系以及中心线Frenet 坐标系的常值特解，进行了Kirchhoff动力学比拟，用一次近似理论分别讨论了它们的Lyapu nov稳定性，导出了若干稳定性判据，并在参数平面上绘出了稳定域. 关键词： 超细长弹性杆 Kirchhoff方程 常值特解 Lyapunov稳定性     

TiN和Ti1-xSixNy薄膜的微观结构分析

使用x射线衍射(XRD)、x射线光电子谱(XPS)、高分辨透射电子显微镜(HRTEM)和原子力显微镜(AFM)多种观测手段分析了TiN薄膜和Ti1-xSixNy纳米复合薄膜的微观结构.实验分析证明Ti1-xSixNy薄膜是由直径为3-5nm的纳米晶TiN和非晶Si3N4相构成,并且Ti1-xSixNy薄膜的表面粗糙度小于相同条件下制备的TiN薄膜,在Ti1-xSixNy薄膜体系的自由能中引入界面能的概念,在此基础上分析了体系中TiN晶粒的取向问题.     

走近纳米科技

 纳米科技于20世纪70年代兴起,进入21世纪越来越被大家耳熟。纳米科技在促进科技进步,提高社会文明程度,改善人类生存质量,更新对物质世界的认知及观念上扮演了举足轻重的角色。纳米是长度单位。一纳米为一米的十亿分之一,如果你的拇指指甲盖宽14毫米,这个比例就相当于拇指指甲盖宽度与地球直径间的比例。纳米科技所接触、研究、开发的是100纳米～0.1纳米范围内物质的性质和应用。一个分子或一个原子大小的数量级大致在10纳米。因此,纳米科技也可以说是在分子水平上观察、分析、研究物质的物理、化学性质并加以开发利用。     

纳米KMn8O16粉体的室温固相合成与表征

室温或近室温固相反应要求绿色化、清洁化[1,2]。我们以KMnO4和MnCl2·4H2O为原料,用室温固相氧化还原反应制备氧化锰粉体时,得到了一种对H2O2分解具有较高催化活性的纳米KMn8O16粉体,用XRD、SEM、IR等技术对其进行了表征,发现研磨时间对粉体性能有显著影响。1　实验部分1 1　粉体的制备按摩尔比(2∶3)准确称取一定量的分析纯KMnO4和MnCl2·4H2O,分别置于玛瑙研钵中充分研细,再混合研磨,固相反应立即发生,体系颜色逐渐加深,并有刺激性气体产生,充分研磨后70℃恒温12h,固相产物依次经水洗至中性、醇洗、抽滤,真空干燥得黑色粉…     

Self-assembly of Carboxyl Functionalized Polystyrene Nanospheres into Close-packed Monolayers via Chemical Adsorption

The polyacrylic acid functionalized polystyrene nanospheres were synthesized and self-assembled into irregular, densely packed monolayers in non-aqueous media. The polymer nanoparticles were chemically adhered to substrates. The morphologies of the resulting films were investigated. The impact of the volume fraction of alcohol in the mixed solvents on the particle adsorption and fabrication of nanosphere assembled films was examined.     

Studies on Synthesis and properties of Mg-Al-nitrate Layered Ouble Hydroxides

A positive Mg-Al-nitrate layered double hydroxides(LDHs) has been synthesized using a non-steady coprecipitation method.The shape.size,chemical composition,electrical property and anion exchange property of the positve nanoparticle were studied by SEM,XRD,FTIR,chemical analysis,spectroanalysis and meaxsuring of electrophoretic mobilities.Preliminary results show the positive nanoparticle is a promising precursor of polymer/LDHs nanocomposite.