氮气等离子体改性壳聚糖-聚丙烯腈复合纳滤膜

以氮气低温等离子体对壳聚糖-聚丙烯腈复合纳滤膜进行表面改性。用接触角、扫描电镜和扫描探针显微镜观察膜表面的亲水性和形貌特征,X射线光电子能谱分析膜表面化学组成,以γ-氨基丁酸为分离对象表征膜的纳滤性能。结果表明:经50W、20Pa的氮气等离子体作用2min,壳聚糖膜表面获得最大程度的亲水性改善,其接触角由102.0°下降至44.3°,平整度明显提升;膜表面C—C、C—O和酰胺基团均有减少,而胺基和羰基相应增加;在pH=6.15的水溶液中对w=1.0%的γ-氨基丁酸进行纳滤,液体的通量由原来的1.12L/(m2·h)提高至1.75L/(m2·h),且对氨基酸的截留率从28%提升至83%。     

有机二元酸-水体系中In(OH)_3/In_2O_3微纳材料的制备与表征

本文利用系列有机二元酸-水体系作为制备In(OH)3纳米晶体介质,采用低温水热法成功制备了不同形貌和尺寸的In(OH)3为纳材料。利用扫描电镜(SEM)、透射电镜(TEM)、X-射线衍射(XRD)、傅立叶红外光谱仪(FT-IR)和拉曼光谱仪(Raman)等手段分别对材料的形貌、结构和物相等进行了表征与分析。实验结果表明,通过本研究方法,在己二酸水体系中可以得到较均一的尺寸在300-400 nm范围的In(OH)3球形粒子,而在癸二酸水体系中则得到棒状和片状混杂的In(OH)3纳米颗粒。样品在450°C条件下焙烧4 h后,可获得相应的具有良好形貌继承性的In2O3微纳材料。     

Fabrication and Performance of a Low Operating Pressure Nanofiltration Poly（vinyl chloride） Hollow Fiber Membrane

A low operating pressure nanofiltration membrane is prepared by interfacial polymerization between m-phenylenediamine(MPDA) and trimesoyl chloride(TMC) using PVC hollow fiber membrane as supporting.A series of PVC nanofiltration membranes with different molecular weight cutoff(MWCO) can be obtained by controlling preparation conditions.Chemical and morphological characterization of the membrane surface was carried out by FTIR-ATR and SEM.MWCO was characterized by filtration experiments.The preparation conditions were investigated in detail.At the optimized conditions(40 min air-dried time,aqueous phase containing 0.5% MPDA,0.05% SDS and 0.6% acid absorbent,oil phase containing 0.3% TMC,and 1 min reaction time),under 0.3 MPa,water flux of the gained nanofiltration membrane reaches 17.8 L/m2·h,and the rejection rates of methyl orange and MgSO4 are more than 90% and 60%,respectively.     

纳通道的物质传输特性及应用

近年来,随着材料科学、微纳加工技术和微纳尺度物质传输理论的发展,纳通道技术得到了越来越多的研究和关注。纳通道包括生物纳通道和人工纳通道,其孔径通常为1~100 nm。在这一尺度下,通道表面与通道内物质之间的作用概率大大增强,使得纳通道表现出许多与宏观体系不同的物质传输特性,例如通道表面电荷与通道内离子之间的静电作用产生了离子选择性,通道内电化学势的不对称分布产生了离子整流特性,物质传输过程中占据通道产生了阻塞脉冲特性等。纳通道中的这些物质传输特性在传感、分离、能源等领域具有广泛应用,例如通过对纳通道进行功能化修饰可以实现门控离子传输;利用亚纳米尺度的通道可以实现单分子传感;利用通道与传输物质之间的相互作用可以实现离子、分子、纳米粒子的分离;利用纳通道的离子选择性可以在通道内实现电荷分离,将不同形式的能量（如光、热、压力、盐差等）高效转化为电能。纳通道技术是化学、材料科学、纳米技术等多学科的交叉集合,在解决生物、环境、能源等基本问题方面具有良好的前景。该文综述了近10年来与纳通道物质传输理论以及纳通道技术应用相关的前沿研究,梳理了纳通道技术的发展过程,并对其在各个领域的应用进行了总结与展望。     

含中心裂纹梯度纳晶金属的数值模拟

梯度纳晶金属由于其微观组织的梯度分布,力学属性也呈现梯度变化,这使得其表现出不同于传统均匀材料的断裂行为．利用材料力学参数的梯度分布来表征梯度纳晶金属中晶粒尺寸的梯度变化,并编写ABAQUS和MATLAB脚本程序建立分层有限元模型．通过数值模拟计算了含有初始中心裂纹的梯度纳晶金属在受远端均匀拉应力作用下的裂尖J积分,分别研究了屈服应力梯度、裂纹角度和裂纹长度对金属材料断裂韧性的影响,并与传统粗晶进行了对比．结果表明梯度纳米结构的存在导致梯度纳晶金属内部的中心裂纹两端表现出不同的断裂韧性,小晶粒一侧裂尖的抗裂韧性优于大晶粒一侧裂尖,且屈服应力梯度绝对值越大,两者差距越大．梯度纳晶金属的断裂韧性受中心裂纹角度和长度变化的影响与传统粗晶金属基本一致,同时在晶粒尺寸梯度的作用下梯度纳晶的裂尖J积分略低于粗晶,即整体上拥有更好的抗裂韧性．     

一种模拟动边界绕流的锐利界面浸入边界法

When the structural wall moves over a fixed grid, the structure coverage will change, resulting in many dead and emerging elements. To avoid the influence of malformation and reconstruction of body-fitted grids on the calculation efficiency and accuracy of the fluid-structure interaction problems with coupled boundary movement on the fixed grid, an improved numerical method for describing the interaction between an immersed rigid body and fluid based on a sharp-interface is proposed. In this method, both the fluid and solid are regarded as pure fluid domains in the whole computational domain, and the solid boundary is divided into several Lagrangian grid points. The flow parameter or velocity is reconstructed by interpolation at the interface element, which is then directly used as the boundary condition of the flow field, thus reflecting the influence of the wall boundary conditions. The method constructs the calculation structure of “virtual point, force point and vertical foot point”, and the velocity of the virtual point is obtained by bilinear interpolation. Then, the velocity of the force point is calculated by forcing the solid boundary to meet the no-slip condition, and the equations of the coupling system based on the immersion boundary method are finally solved to realize the numerical simulation of the flow with a complex moving boundary. The numerical program for this immersed boundary method is established using C++, then the accuracy and reliability of the proposed method are validated by comparison with the literature and experimental results of the basic numerical example of flow around a cylinder. Furthermore, the effects of the structural shape and the angle of attack on the trailing vortex structure, the vortex shedding frequency, and the lift/ coefficient characteristics of the flow around the elliptical cylinder have been analyzed. The anti-symmetric S-type, “P+S” Ⅰ-type and “P+S” Ⅱ-type trailing vortex shedding modes, as well as the variation laws of the vortex structure size, vortex shedding frequency and lift-drag coefficients ratio with axis ratio and angle of attack, are captured. The critical angle of attack (25°) corresponding to the maximum lift-drag ratio is determined as 25°.     

基于流固耦合的压缩机舌簧排气阀数值研究

针对带升程限制器的变转速活塞式压缩机排气阀,利用ANSYS软件流固耦合模块(fluid-structure interaction, FSI)建立了压缩机排气的三维流固耦合模型,得到了排气过程中流体在各个曲轴转角时的压力场、速度场和阀片位移变化曲线。研究表明：气缸内部速度和压力分布不均,阀口处变化程度最大;较小的转速会导致阀片震颤,提高转速后会减小气体波动但会增加压力损失导致阀片延迟开启和关闭,甚至过大的转速会造成排气回流降低压缩机的制冷性能;不同制冷剂对压缩机性能会产生影响。最后,结合对阀片的模态分析得出了该压缩机最佳的运行转速范围,并根据不同制冷剂下阀片的不同状态提出了解决方法。     

基于物理机制模型的民机机体噪声预测

为实现民机总体方案快速评估与优化迭代设计,文章对民机增升装置前缘缝翼及后缘襟翼分别建立了基于民机噪声物理机制的预测模型,在此基础上搭建了机体噪声预测体系,开发了相应的预测工具UNICRAFT.为评估预测工具UNICRAFT的计算精度和效率,文章分别针对翼吊式布局,前缘缝翼/Fowler式襟翼形式,以及尾吊式布局,前缘缝...     

纳米色料的制备及应用

纳米色料是一类可以结合颜料和染料两者优点的新型色料,除了在传统的着色领域具有独特优势外,在光电高新技术领域也具有广阔的应用前景。本文综述了国内外有机纳米色料在制备和应用上的最新研究进展,归纳出几种有代表性的制备有机纳米色料以及有机色料/无机物杂合纳米色料的最新研究方法。着重论述了细乳液聚合法制备纳米色料,对各种制备方法作出比较评价,并结合研究现状对纳米色料在光电领域的应用提出了一些设想。     

微纳电化学传感界面的构建及其用于单细胞实时监测

细胞是生物体形态结构和生命活动的基本单位.常规检测群体细胞的方法往往会掩盖细胞间的个体差异,因此亟需发展高效的单细胞分析策略,深入研究细胞生命活动过程,揭示疾病发生发展机制,推动个体化诊疗.超微电化学传感器具有尺寸小、灵敏度高、时空分辨率高等特点,在单细胞实时动态监测方面发挥了非常重要的作用.目前,微纳电化学传感器在电...