无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

纳米计量与原子光刻技术分析

为了说明原子光刻（Atom Lithography）在纳米计量及传递作用中的特殊地位，首先对纳米计量标准及其现状进行了简要介绍，提出纳米计量中原子光刻的基本概念和优势，结合原子光刻实验装置对原子光刻技术的工作机理进行了分析。结果表明，可以通过原子光刻技术得到纳米量级刻印条纹，为纳米计量及标准传递提供更加精确的手段。最后对常见的2种原子光刻技术——沉积型原子光刻和虚狭缝型原子光刻进行了阐述，指出2者的不同之处，为不同条件下原子光刻提供了一定的借鉴。     

退火温度对Fe基纳米晶粉芯磁致频移特性影响的研究

研究了充有不同温度退火Fe基纳米晶粉芯LC回路的磁致频移特性（MFS），发现充有不同温度退火Fe基纳米晶粉芯LC回路的磁致频移不同，充有经600℃退火Fe基纳米晶粉芯LC回路的磁致频移最灵敏。     

Fractional-Linear Transformations of Operator Balls; Applications to Dynamical Systems

The operator sets, which are the subject of this paper, have been studied in many papers where, under different restrictions on the generating operators, convexity, compactness in the weak operator topology, and nonemptiness were proved for sets of different classes under study. Then the results obtained were used in these papers to solve several applied problems. Namely, they played the key role in establishing the dichotomy of nonautonomous dynamical systems, with either continuous or discrete time. In the present paper, we generalize and sharpen the already known criteria and obtain several new criteria for convexity, compactness, and nonemptiness of several special operator sets. Then, using the assertions obtained, we construct examples of sets of the form under study which are nonconvex, noncompact in the weak operator topology, as well as empty, and are generated by ＂smooth＂ operators of a special class. The existence problem for such sets remained open until the authors of this paper announced some of its results.     

关于落球法测粘滞系数的公式和使用范围

用落球法测粘滞系数的二级近似公式,有些教材是以过时的戈尔茨坦(Goldstein)公式为依据得出来的,而雷诺(Reynolds)数R~2项的系数却与原公式不一致。本文提出一些商榷意见,并讨论一下落球法的使用范围。一、正确的二级近似公式直径为d的小球,在粘滞系数为η、     

胶球研究现状

本文介绍了有关胶球研究的现状,重点介绍确认胶球的一些定性的判据以及实验上已发现的一些可能的胶球候选者.     

聚氧化乙烯介质中的掺杂硫化锌纳米晶的制备及光学性质

简述了聚氧化乙烯介质中的铽、铕、铥、钆、钇、镓、锰掺杂的硫化锌纳米晶的制备方法以及紫外吸收光谱、激发光谱和光激发发射光谱.制成的硫化锌纳米晶直径为3.0～3.5nm.     

Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.     

位置参数估计量的损失函数之估计

本文考虑损失函数的估计问题,分别对于球对称分布和均匀分布情形给出了其参数的J-S型估计量的损失之估计,它们满足[1]中提出的条件(Ⅰ)和(Ⅱ).     

球约束凸二次规划的一个新算法

首先利用Lagrange对偶 ,将球约束凸二次规划问题转化为无约束优化问题 ,然后运用单纯形法求解无约束优化问题 ,从而获得原问题的最优解