固定有四硫富瓦烯.四氰基奎诺二甲烷的杂聚吡咯膜微葡萄糖电极

铂比互铂化处理后，形成疏松，粗糙的表面，将四硫富瓦烯－四氰基奎诺二甲烷导电有机盐入到铂化的铂黑微粒中。将３－羰基丁酸吡咯与吡咯按适当的比例在其表面用电化学聚合方法，将葡萄糖氧化酶固定于聚合形成的杂聚膜中制成微酶电极。该微酶电极测定时几乎不受氧分压影响，灵敏度高，响应快。     

石墨探针GFAAS直接测定甲醛中痕量铅

铅是判断甲醛中重金属含量的重要指标,其含量高低影响到甲醛的纯度。准确测定铅的含量,对甲醛工业生产有重要的指导意义。目前测定有机物中微量金属的方法有溶出电位法、电位滴定法、电热AAS法、荧光光谱法等。由于甲醛中铅的含量很低,因而要求检测的方法灵敏度高,检出限低,重现性好,结果可靠。石墨探针原子化技术是一种实现等温原子化的新技术,它具有加热速率快,原子化效率高,基体干扰少,灵敏度高等特点,是一项良好的痕量金属分析技术。本文采用该技术对痕量铅进行一系列条件试验,并直接测定甲醛中铅的含量。     

微型滴定分析装置的研究

微型滴定分析装置的研究朱兵吴倩（华东师范大学化学系上海２０００６２）一、微型滴定装置的设计制作和特点在设计制作微型试剂滴瓶、电解装置、焰色反应器、固液分离器和定量加液管等多种微型器件的基础上［１，２］，设计制作能规范操作的微型滴定分析装置，其主要部件...     

浊点萃取在生物大分子分离及分析中的应用

浊点萃取是一种新兴的环保型液2液萃取方法。本文介绍了表面活性剂胶束溶液的形成过程和浊点现象, 总结了浊点萃取法的操作方法, 并且详细讨论了它在生物大分子分离纯化及生物分析中的应用。最后探讨了该技术的发展前景。     

有机化合物中硫元素的微量库仑分析

含硫有机化合物在竖式石英燃烧管中,于氧气流下经950℃高温燃烧分解,生成的二氧化硫(或三氧化硫)通过含双氧水的石英棉转化管,转化为硫酸。硫酸泵入电解池后,进行酸-碱库仑滴定。本法操作按时间程序控制进行,每次分析时间为15分钟,分析绝对误差为±0.5％对含磷的有机硫化合物及含钠、铁、铜、钼、镍、镧等金属的有机硫化合物,如在样品上复盖一层三氧化钨进行燃烧分解,也可获得满意的结果。     

含茂基及酰亚胺基镧系金属有机化合物的合成

在室温下由邻苯二甲酰亚胺[phthalimide, H(Pht)]与Cp3Ln在四氢呋喃溶液中反应, 合成了六个新化合物: Cp2Ln(pht),CpLn(pht)2, (Cp=cyclopentadienyl; Ln=Yb, Er, Dy;pht=phthalimido)。它们均经元素分析、红外光谱和质谱鉴定, 为非溶剂化的桥式二聚体结构。     

新型Zhuo酚酮类糖苷化合物的合成

根据Zhuo酮的结构特点，对Zhuo酚酮类化合物与半乳糖的Kenigs-Knorr反应进 行了研究。探索出一种具有较高立体选择性的合成方法，从而制得四种具有β－构 型的单一端基异构体的Zhuo酚酮半乳糖苷新化合物。生成的新化合物不但保持了原 有的生理活性，而且降低了毒性、提高了药效，为人工合成Zhuo酚酮类增添新化合 物的同时，也扩展了此类化合物的应用领域。应用元素分析、核磁共振、红外光谱 表征了它们的结构。     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

B20N20团簇的结构与稳定性

B3LYP/6-31G* density functional theory calculations have been carried out on the structure and stability of ten B20N20 clusters. It was found that two new proposed isomers with two octagons, twelve hexagons, eight squares in Cab and C2 symmetry were more stable than the isomer with sixteen hexagons and six squares in C2 symmetry which was previously deemed to the most stable by 79.5 and 13.8 kJ/mol respectively. The isomer with two decagons in S10 symmetry is much higher in energy than the most stable structure in C4h symmetry by 637.2 kJ/mol.     

斯蒂芬酸氢铷的制备，晶体结构和热分解机理

A new compound,[RbHTNR]_∞[HTNR:C_6H(NO_2)_3(OH)O],was synthesized by the reaction of rubidium ni-trate and styphnic acid.The molecular structure was characterized using X-ray diffraction analysis,elementalanalysis and FTIR spectroscopy.The crystalline is monoclinic with space group P2_1/n and the empirical formulaC_6H_2N_3O_8Rb.The unit cell parameters are:a=0.4525 nm,b=1.0777 nm,c=1.9834 nm,β=90.47(2)°,V=0.96725 nm~3,Z=4,D_c=2.263 g/cm~3,Mr=329.58,F(000)=640,μ(Mo Kα)=5.165 mm~(-1).The thermal decompo-sition mechanism of the complex was studied by differential scanning calorimetry(DSC),thermogravimetry-derivative thermogravimetry(TG-DTG)and FTIR techniques.At the linear rate of 10 ℃/min,the thermaldecomposition of the complex showed three mass reducing processes between 60 and 500 ℃,and finally evolvedRbCN and some gaseous products.