MPLS与移动IPv6的结合探索

MPLs(多协议标记交换)是一种转发机制，结合了第二层的高速交换和第三层路由的灵活性，为未来骨干网提供了高速的IP转发和扩展性。IFv6是未来网络的基石，它解决了当前IFv4所面临的问题，而移动IP技术解决了用户移动性需求。本文对MPLS与移动IPv6的结合所遇到的问题进行了一些探索。     

移动化学反应界面实验后出现的前沉淀区带

以1％的琼酯糖凝胶作抗对流介质（内含的背景电解质KCl），进行了由氢离子和钴离子形成的移动化学反应界面的实验．发现：在实验完成后30分钟，在原有的移动化学沉淀反应界面之前逐渐出现蓝色的前沉淀区带；之后，前沉淀区带逐渐延长，大约12小时后其长度不再延长．     

光催化反应器降解VOCs模型研究

本文发展普适的光催化反应器降解VOCs模型,应用于光催化反应与对流传质沿反应表面分布不均匀的光催化反应器。根据该反应器模型,指出评价光催化反应器性能的主要参数NTUm由三个无量纲参数的线性乘积组成,分别是反应面积与流通截面面积的比值(A*),传质斯坦顿数(stm)和反应有效度(η),该三参数分别体现光催化反应降解VOCs过程中的面积因素以及传质一反应过程的影响。通过上述模型与无量纲参数,可评价光催化反应器的性能瓶颈,并为如何改进提高光催化降解VOCs的性能指明方向。     

填充床中气体渗流与化学波耦合问题的研究

研究等温和显著气固反应条件下填充床内反应气体浓度(物质)波推进与混合气体渗流的相互作用,指出化学反应对流动的影响包括两个方面,反应过程中混合气体质量的变化和密度的变化。混合气体流动将反过来影响反应进程。分析表明,按耦合模型和非耦合模型得到的速度场完全不同;按耦合模型,反应气体的浓度(物质)波阵面的推进对混合气体的流场有显著影响,因此按耦合模型计算的混合气体流场强烈地依赖于时间;忽略化学反应引起的混合气体密度变化的耦合模型,将导致一个质量消失的汇(或质量生成的源),因此将引起混合气体渗流速度的明显变化,并可能导致物理上不合理的结果;按耦合模型和非耦合模型计算的浓度场也有很大差别;当反应气体与惰性气体摩尔质量相差较大时,不能忽略反应过程中混合气体密度的变化;研究表明对于显著气固反应不能忽略化学反应与气体渗流的相互作用。     

Study for 2D moving contact elastic body with closed crack using BEM

Using a sub-regional boundary element method, an algorithm for the two-dimensional elastic bodies with a closed crack loaded by a moving contact elastic body is proposed. Since the extent and status of the contact surface of two elastic bodies and the crack within the body are all not known in advance, a double iterative contact algorithm is used. The BEM program for solving the closed crack problems is developed, some numerical examples are calculated, and the results of the center crack cases are shown to be in good agreement with the analytical solution in the classical fracture mechanics. In the condition of friction and non-friction, some coupling computational results of the SIF for the closed crack, with different angles and loaded by a moving contact elastic body, are also obtained by a numerical computation. The project supported by the National Natural Science Foundation of China (10172053) and NJTU Foundation of China (PD-157)     

STUDIES ON DECOLORING AND REMOVING IRON IN THE GOURMET POWDER BY MULTISTAGE FLUIDED BED ADSORPTION

A new decoloring and iron removing technology for the gourmet powder is developed and the mixed bed adsorption of TPCIX cloumn(Tipping Plate Continous Ion Exchange Column) is studied using mining feed of neutraliation liquid and crystallization mother liquid.The appropriate conditions of decoloring,iron removing and the operation of TPCIX column are investigated.     

Improved catalytic performance of Ni catalysts for steam methane reforming in a micro-channel reactor

Milliseconds process to produce hydrogen by steam methane reforming （SMR） reaction, based on Ni catalyst rather than noble catalyst such as Pd, Rh or Ru, in micro-channel reactors has been paid more and more attentions in recent years. This work aimed to further improve the catalytic performance of nickel-based catalyst by the introduction of additives, i.e., MgO and FeO, prepared by impregnation method on the micro-channels made of metal-ceramic complex substrate. The prepared catalysts were tested in the same micro-channel reactor by switching the catalyst plates. The results showed that among the tested catalysts Ni-Mg catalyst had the highest activity, especially under harsh conditions, i.e., at high space velocity and/or low reaction temperature. Moreover, the catalyst activity and selectivity were stable during the 12 h on stream test even when the ratio of steam to carbon （SIC） was as low as 1.0. The addition of MgO promoted the active Ni species to have a good dispersion on the substrate, leading to a better catalytic performance for SMR reaction.     

Study on structural characteristics and adsorption performance of ultrasonic treated Mn-containing sulfur transfer agent

To prepare manganese-containing spinel sulfur transfer agent with acid peptization, ultrasonic wave is used for the first time to modify the structure of sulfur transfer agent in this work. Mini fixed bed reactor was used to investigate the effect of ultrasonic power, time and temperature on the structure and oxidation adsorption performance of sulfur transfer agent and the adsorption kinetics and mechanism of SO2 were analyzed. SEM, TEM, XRD and N2 adsorption-desorption techniques were employed to characterize and analyse the function of sulfur transfer agent. The results indicated that manganese-containing spinel is a kind of promising sulfur transfer agent and exhibits higher sulfur capacity and desulfurization degree under the selected conditions of the ultrasonic wave power of 60%, and with the treatment period for 3 h at a temperature of 60 ℃.     

Ce含量对Ni-Ce/Al_2O_3催化剂结构及浆态床CO甲烷化性能的影响

以γ-Al2O3为载体,采用等体积浸渍法制备了不同Ce含量的Ni-Ce/Al2O3催化剂,并考察了其浆态床CO甲烷化反应性能。借助XRD、BET、H2-TPR及CO-TPD等对催化剂进行了表征分析,研究了催化剂的微观结构与甲烷化性能之间的关系。结果表明,助剂Ce的引入能够加强Ni物种与载体之间的相互作用、增强活性组分Ni对CO的吸附能力。随着Ce含量的升高,Ni物种在载体表面的分散度提高、Ni晶粒粒径减小,催化剂的比表面积及与载体相互作用较强的β-NiO相对含量先升后降。催化剂的浆态床甲烷化活性随Ce含量的升高呈现规律性的变化,CO转化率和CH4时空收率先增加后略有下降,当Ce含量为4%(质量分数)时,催化剂甲烷化活性最佳。     

蒙皮点阵一体化支撑结构的移动可变形组件优化设计及空间站应用

中国空间站是我国研制的系统最为复杂的载人航天器,其中有效载荷支撑结构的高效轻量化设计是工程研制过程中遇到的技术难题。本文介绍了受晶体对称性启发的增材制造自支撑三维点阵结构设计方法,发展了基于蒙皮点阵一体化结构形式的移动可变形组件（MMC）拓扑优化方法,完成了面向增材制造的中国空间站某相机支撑结构的优化设计,该结构采用激光选区熔化成形（SLM）工艺制造,通过了力学试验考核,实现结构减重50%,基频提高35%,完成了基于MMC方法的蒙皮点阵一体化结构在我国载人航天领域的首次型号应用与在轨验证。