Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.     

C60的发现,制备,结构,性质及其潜在应用前景

Ｃ６０是碳的一种新的同素异型结构．本文综述了Ｃ６０的发现与制备方法，Ｃ６０形成的机制与其绪构特征，以及Ｃ６０的性质与其潜在的广阔应用前景．重点介绍用红外（ＩＲ）谱，１３Ｃ核磁共振（ＮＭＲ）谱和Ｘ射线衍射（ＸＤ）谱研究Ｃ６０结构的结果，及掺杂Ｃ６０固体的高温超导电性及其结构的最新研究进展．     

室温下压致铁钴镍合金的bcc→hcp相变

 本文采用高压X光衍射方法在金刚石对顶压砧中在位地（in situ）研究了Fe₆₈Co₂₄Ni₈（wt%）合金在室温下的压致bcc→hcp结构相变和直到40.5 GPa的等温压缩行为。实验结果表明该合金在常压下为bcc结构，晶格常数a₀=(0.287 0±0.000 1) nm，体积V₀=(7.119±0.007) cm³/mol，密度ρ₀=(7.981±0.008) g/cm³；在20.9 GPa附近出现bcc→hcp结构相变，两相共存压力区约10 GPa，在此区域内有晶面间距d(002)_hcp=d(110)_bcc，且原子平面(002)_hcp//(110)_bcc，hcp相比bcc相体积减小(0.33±0.02) cm³/mol；高压相hcp结构的晶格参数比值c/a=1.608±0.004；相变后原子配位数的增加使得hcp相(002)平面内及(002)平面间的最近邻原子间距比bcc相最近邻原子间距分别增大约1.6%和0.5%；用Murnaghan状态方程对实验数据进行最小二乘法拟合，得到bcc相B₀=(130±13) GPa，B₀'=12.6±0.5；hcp相V₀=(6.62±0.04) cm³/mol，B₀=(243±21) GPa，B₀'=6.8±0.3；对于该合金的bcc→fcp相变时的结构转变机制做了详细的讨论。     

Study of hot bands in the B2Σ+u-X2Σ+g system of C-2 anion

Optical heterodyne magnetic rotation enhanced velocity modulation spectroscopy was employed to observe the visible absorption spectra of the B^2Σ^+_u-X^2Σ^+_g electronic transition of C^-_2. Four hot bands (0,1), (1,2), (2,3) and (3,4) have been observed and the band (3,4) is measured directly for the first time, so far as we know, by absorption. A rotational analysis was carried out to obtain molecular constants. With the Franck－Condon principle and the vibrational Boltzmann distribution, we have estimated the vibrational temperature of C^-_2 to be about 3000K.     

碳分子线基态特性理论研究

从第一原理出发,利用密度泛函理论B3LYP系统研究了碳分子线Cn(n＝3～10)的电子结构特性.对优化结果分析发现,由于离域效应的作用,当n为奇数时,分子线基态为单重态,反之,当n为偶数时,三重态为其稳定的基态.对其电子结构分析可得,随着n的增加,体系能量逐渐降低;同时本文确定了分子线体系最高占据轨道HOMO能量EH、最低未占据轨道LUMO能量EL与n的关系式,即EHn-2＜EHn＜EHn+2,ELn-2＞ELn＞ELn+2.因而碳分子线的费米能级会表现出特有的奇偶性.该工作将有利于准确认识分子器件的伏安特性,设计出良好性能的分子器件.     

四氯合金属(II)酸烷铵在280-500K间的热力学性质和相变:III.四氯合镉(II)酸n-十二烷铵

在280-500K温度范围内用自动绝热量热计测量了(n-C~1~2H~2~5NH~3)~2CdCl~4的热容。在所研究的温度范围内发现一个固-固相转变, 其相变温度, 相变焓和相变熵分别为(332.4±0.1)K,(48.35±0.33)kJ.mol^-^1和(145.5±1.0)J.K^-^1.mol^-^1。结合已发表的(n-C~1~2H~2~5NH~3)~2MCl~4(M=Mn, Zn)的相变参数讨论了此类配合物的中心原子对其相变的影响。[MCl~4]^2^-配位方式的不同被认为是该类配合物的相变热参数产生差异的主要原因。