Ring-closing Metathesis on an Allyl-terminated Carbosilane Dendrimer

Grubbs‘ catalyst was used to prepare a series of carbosilane dendrimers with silacyclopentene peripheral groups. It was found that ring closing metathesis reaction was influenced strongly by the reaction temperature and the amount of catalyst.     

第5/6副族高价过渡金属氯化物的有机反应

从制备化学的角度, 对包括作者本人的研究工作在内的由第5/6副族高价过渡金属氯化物参加的有机反应进行了综述. 内容包括以下几个方面: (1)烷烃、烯烃和炔烃与第5/6副族高价过渡金属氯化物的卤化反应; (2)作为Lewis 酸催化的反应; (3)烯烃歧化反应及炔烃的聚合反应; (4) MoCl₅参与的芳烃氧化偶合反应; (5)硫醚化及扩环反应.     

某些苯二醛类双Schiff碱及其双铜(Ⅱ)配合物研究

用2-甲氧基-5-氯-1,3-苯二甲醛与含有不同取代基团X的邻氨基酚缩合,合成了一系列双Schiff碱L-X(X=OMe,diMe,Me,t-Bu,H,Cl,NO_2),它们与乙酸铜(Ⅱ)作用生成了一系列的双核配合物Cu_2L-X(OEt).用红外、紫外、磁天平、顺磁共振等手段对配合物进行了表征,并通过量化计算(CNDO/2法)探讨了配合物的成键性质。研究结果表明,该类配合物是一个较大的共轭体系,配合物中Cu(Ⅱ).Cu(Ⅱ)之间有较强的反铁磁性交换作用,其共轭程度和交换作用强弱皆随X基团的不同而呈现某种变化规律。     

Direct Electrochemistry of Cytochrome C on the Glassy Carbon Electrode Modified with 1-Pyrenebutyric Acid/MWNTs

With 1-Pymnebutyric acid （PBA） and multiwalled carbon nanotubes （MWNTs）, glassy carbon electrode modified was successfully prepared. In phosphate buffer solution （pH 7,0）, the direct electrochemistry of cytochrome C （Cyt C） was realized. In the cyclic voltammetry experiment two pairs of redox peaks ofCyt C were observed at 0.018 V and -0.314 V （vs. SCE）, respectively. The redox reaction at 0.018 V was diffusion controlled, while the redox reaction at -0.314 V was adsorption controlled.     

碳载体的O3处理对直接甲醇燃料电池Pt-Ru/C催化剂性能的影响

为了提高直接甲醇燃料电池阳极催化剂的催化活性, 利用O₃处理的Vulcan XC-72碳黑为载体, 制备Pt-Ru/C催化剂, 并与未经处理的Vulcan XC-72为载体制备的Pt-Ru/C催化剂的性能进行比较. 采用XPS和BET测试了O₃处理后碳粉表面的含氧浓度和比表面积, 结果表明, 随处理时间延长, 碳表面含氧浓度先减少后增加, 比表面积减小; 而随着处理温度升高, 比表面积增加, 含氧浓度先减少后增加. XRD, TEM方法对催化剂的结构及形貌的表征结果表明: O₃处理的碳黑为载体制备的Pt-Ru/C催化剂粒径均匀、分散性好. 在0.5 mol/L CH₃OH和0.5 mol/L H₂SO₄溶液中, 利用粉末微电极测试了循环伏安和稳态极化曲线, 结果表明: O₃处理碳粉为载体的催化剂比未经处理的碳粉为载体的催化剂的活性高. 研究了O₃处理碳粉的时间和温度对催化剂性能的影响, 电化学测试表明: 140 ℃处理6 min的碳粉为载体制备的催化剂对甲醇的电催化氧化活性最佳.     

富勒烯及其衍生物的质谱研究

本文制备了一系列富勒烯及其衍生物，并利用多种质谱技术进行了鉴定、表征、揭示了它们在离子源条件下的稳定性及解规律。这些富勒烯及其省生物在ＦＤＭＳ、ＩＳＭＳ中均得到了较强的准分子离子峰且碎片峰很少。结果表昨ＦＤＭＳ，ＬＳＩＭＳ技术均适于富勒烯及其衍生物的定性分析，是目前富勒烯分析鉴定中较好的方法。     

PREPARATION OF CUO/γ-Al2O3 CATALYSTS FOR CATALYTIC COMBUSTION VOCS VIA PLASMA

CuO/γ-Al2O3 catalysts were prepared by plasma treatment and conventional impregnation methods. The catalytic combustion of two kinds of volatile organic compounds (VOCs), toluene and benzene, were carried out over these CuO/γ-Al2O3 catalysts. The surface properties of these catalysts were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The experimental results showed that in catalytic combustion the activity of the CuO/γ-Al2O3 catalyst prepared via plasma was much higher than that of the CuO/γ-Al2O3 catalyst prepared by conventional impregnation method. XRD results showed that an enhanced dispersion had been achieved with the plasma treatment. SEM results indicated that the size became much smaller and the surface became more uniform with the plasma treatment.     

离子注入修饰电极检测硝基苯

离子注入是一种新技术，可按人们的意愿和需要，将不同的离子注入不同的基本电极表面，制成具有催化活性强，稳定性高，重现性好等特点的修饰电极。作者研究了离子注入钴和注入镍的玻碳电极在０．１ｍｏｌ／ＬＨＡｃ－ＮａＡｃ缓冲溶液中硝基苯的行为及测定。     

REDUCING NONSELECTIVE PROTEIN ADSORPTION AND CELL ADHESION ON POLYACRYLONITRILE FILMS BY COPOLYMERIZATION OF ACRYLONITRILE WITH α-ALLYL GLUCOSIDE

In this work, the surface properties of novel sugar-containing polymers, α-allyl glucoside (AG)/acrylonitrile (AN)copolymers, were studied by contact angle, protein adsorption and cell adhesion measurements. It was found that the contactangle of the copolymer films decreased from 68° to 30° with the increase of AG content in the copolymer. The adsorptionamount of bovine serum albumin (BSA) and the adhesive macrophage onto the film surface also decreased significantly withincreasing α-allyl glucoside content from 0 to 42 wt% in the copolymer. These preliminary results reveal that both thehydrophilicity and the biocompatibility of polyacrylonitrile-based membranes could be improved by copolymerizing acrylonitrile with vinyl carbohydrates.     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.