(Li,Ca,A)2SiO4:Eu,Bi发光体的合成和发光性能的研究(A=Al,Y,La,Gd)

为了寻找新的发光基质材料,用高温固相反应合成了(Li,Ca,A)₂SiO₄:Eu,Bi系列发光体(A=Al,Y,La,Gd).通过激发光谱和发射光谱的测试.首次在碱土金属硅酸盐体系中研究了Al,Y,La,Gd等三价金属离子对Bi³⁺、Eu³⁺发光特性和Bi³⁺敏化Eu³⁺发光性能的影响,得到了良好的基质组成.实验结果表明.基质中适当含量的Gd³⁺可大幅度提高Eu³⁺的发光强度,使⁵D₀-⁷F₂发射强度增加6倍.Bi³⁺对Eu³⁺有很好的敏化作用,以A=Gd或Al时较好,对⁵D₀-⁷F₁辐射跃迁的敏化效果尤为突出.     

碱土金属元素杂多钨酸盐的合成及性质

本文报道了ＫａＨｂ「Ｚ（ＸＷ９Ｏ３４）２」．ｍＨ２Ｏ型６种含碱土金属元素杂多配合物的合成。通过元素分析，电导滴定，ＩＲ，ＵＶ，极谱，ＣＶ和ＴＧ－ＤＴＡ等方法研究了配合物的组成和性质，并比较了它们的热稳定性。     

高稳定Ce-Mg-O复合氧化物纳米粉体的合成和结构分析

采用聚合物前驱体法合成了高稳定的Ce-Mg-O复合氧化物纳米粉体．应用TG-DTA,TEM,XRD,Raman,BET表面积测试技术研究了Ce-Mg-O复合氧化物纳米粉体的结构和性能．结果表明采用聚合物前驱体法和引入碱土金属Mg有利于提高材料的比表面积,合成的Ce-Mg-O复合氧化物粉体平均粒径10～20nm,具有1000℃高温下不团聚、热稳定性好的性能．     

碱土元素掺杂的BaFeO3钙钛矿型催化剂的NOx储存性能

采用溶胶-凝胶法制备了Ba_1-xM_xFeO₃ (M=Mg, Ca, Sr; x=0, 0.1, 0.2)系列钙钛矿型NO_x储存还原(NSR)催化剂, 考察碱金属元素Mg、Ca 和Sr 的掺杂对BaFeO₃ 钙钛矿NO_x 储存和氧化性能的影响. 结果表明, 在250-400 ℃范围内Mg的掺杂提高了BaFeO₃钙钛矿的NO_x储存性能, 其中以Ba_0.8Mg_0.2FeO₃样品的NO_x储存性能最佳, 在温度350 ℃时NO_x储存量高达1200 μmol·g^-1以上, NO→NO₂转化率为53.4%. 与BaFeO₃比较,Ba_0.8Mg_0.2FeO₃样品在250 ℃进行NO_x储存时就出现了单齿硝酸盐, 并随储存温度的变化而变化, 它的数量与NO_x储存量有相同的变化趋势. 傅里叶变换红外(FTIR)光谱结果表明, 与BaFeO₃相比, Ba_0.8Mg_0.2FeO₃样品NO_x储存量增大的原因在于: 一方面, 形成了具有A位缺陷的钙钛矿结构, 产生大量能够用于储存NO_x的氧空位; 另一方面, 未进入钙钛矿晶格的Mg元素可能以碱性氧化物的形式与NO_x作用形成了单齿硝酸盐.     

生物质气化过程中碱金属和碱土金属的析出特性研究

研究了固定床上生物质及热解焦CO2气化过程中碱金属及碱土金属(AAEMs)的析出特性。利用原子吸收光谱仪,考察了不同生物质种类、不同热解制焦温度对AAEMs析出的影响。不同生物质由于其挥发分含量不同引起气化失重率的差异,焦气化活性随制焦温度升高而降低。生物质及焦气化过程中Na析出率最大,其次是K,碱土金属析出率低于碱金属,这与元素在生物质中的存在形式、金属价态有关。低温段K的析出率随热解制焦温度的提高而增加,而Na在热解与气化段总的析出率与制焦温度关系不大。生物质的种类尤其是灰中的Si含量对Ca和Mg的析出影响较大,气化效率高的生物质AAEMs析出较多。热力学计算结果显示,气化过程中Na、K多以氯化物的形式存在并析出,Ca、Mg则更倾向于形成硅酸化合物而不易析出。     

Sr2Si5N8:Eu2+荧光粉的制备与发光性能

以α-Si3N4,SrCO3,Eu2O3为原料,采用碳热还原氮化法制备了Sr2Si5N8:Eu2+荧光粉.研究了材料的结构与光谱特性,分析了影响材料发光性能的工艺因素.结果表明,石墨粉含量和助熔剂的用量对Sr2Si5N8相的形成和发光性能有重要影响.当nc/nSr=1.5,助熔剂用量为4wt%时,合成样品的主晶相为正交晶系Sr2Si5N8,在400～550 nm可见光激发下,可发射峰值波长位于 609nm荧光.激发带的位置与Eu2+离子浓度无关,为400～550 nm之间的宽带激发;但发射强度随Eu2+离子浓度的增加而增加.Eu2+离子浓度达到5mol%时发射强度达最大值,在Eu2+离子浓度为2mol%～5mol%之间,观察到发射峰的红移现象.     

添加碱土金属化合物对CeO2甲烷氧化偶联催化性能的影响

天然气中甲烷的利用,特别是氧化偶联(OCM)制乙烯过程近年来成为多相催化研究的热点之一.自从1982年Keller和Bhasin提出该课题以来许多学者已进行了大量催化剂的研制工作.尽管在这方面已取得重要进展,但催化剂的性能距工业化要求还有较大差距.     

Ca3La3(BO3)5中Eu3+的光致发光

本文详细地研究了紫外光激发下,Ca_3La_3(BO_3)_5中Eu~(3+)的发光光谱和激发光谱与组成、结构的关系.发现Eu~(3+)在此基质中可能不止一个发光中心;Eu~(3+)自身浓度猝灭的机理为电四极-四极相互作用.     

钙钛矿型氧化物负载Ni催化剂上甲烷二氧化碳重整反应研究

采用浸渍法制备了一系列MTiO₃(M=Mg、Ca、Sr、Ba)钙钛矿型氧化物负载的Ni催化剂(Ni的负载量为5%,质量分数),通过XRD、氮吸附、H₂-TPR、CO₂-TPD、XPS和TG等技术对催化剂进行了表征,对其甲烷二氧化碳重整反应的催化性能进行了研究。结果表明,M为不同碱土金属时,催化剂上金属载体相互作用、活性组分的表面原子浓度以及催化剂晶格氧的流动性都发生了变化。Ni/CaTiO₃催化剂上金属载体相互作用较强,还原出的活性组分Ni的含量较多,晶格氧流动性较高,因而具有较好的催化性能。SrTiO₃载体颗粒粒径较大,Ni/SrTiO₃催化剂上Ni的分散度不高,金属载体的相互作用较弱,表面Ni原子相对含量较低,晶格氧的流动性较差,其甲烷二氧化碳重整反应活性也最低。     

固体核磁共振研究碱土金属磷硅酸盐玻璃的六配位硅结构

Phosphate glass is widely used in optical applications; however, its generally low chemical stability and poor thermal mechanical properties hinder the application of phosphate glass to the rapidly evolving laser industry. The addition of a small amount of silicon can form a six-coordinate Si (Si⁽⁶⁾) network and improve the above-mentioned poor properties of phosphate glass. Therefore, it is important to characterize and understand the structural details of phosphosilicate glasses. It is difficult to investigate the glass structure because of its complicated and disordered characteristics. However, solid-state nuclear magnetic resonance (NMR) spectroscopy can provide detailed local structural information, regardless of the presence of its long-range order. To study the effect of alkaline earth metals on Si⁽⁶⁾ species formation, we prepared phosphosilicate glasses (2MO-3P₂O₅)_(1−x)·(SiO₂)_x (M = Ca, Sr, Ba) by conventional melt-quenching, and the glass structure was investigated by solid-state NMR and Raman spectroscopy. The ³¹P and ²⁹Si NMR spectra indicated that the glass networks consisted of P⁽²⁾ and P⁽³⁾ tetrahedrons linked via four- and six-fold coordinated silicon units (Si⁽⁴⁾ and Si⁽⁶⁾). The fraction of six-coordinated silicon Si⁽⁶⁾ decreased with increasing SiO₂ content. Similarly, the Raman spectra showed that the vibration band of the P＝O stretching mode in P⁽³⁾ linked with Si⁽⁶⁾ neighbors reduced as the silica content increased. The connectivities between various phosphorus species were probed by ³¹P one- and two-dimensional refocused INADEQUATE experiments. This experimental technique is based on homonuclear J-coupling and yields correlation peaks between nuclei engaged in P―O―P linkages (P⁽²⁾ and P⁽³⁾ units). The signals from isolated ³¹P nuclei are suppressed because of the absence of J-coupling, which precludes the formation of double quantum coherences. The results indicated the segregation of P⁽²⁾ and P⁽³⁾ units in the prepared glass, which were also compared with those in the previously reported Na₂O-P₂O₅-SiO₂ glasses. They differed from alkali phosphosilicate glasses, where each P⁽³⁾ unit exhibited a maximum average of one Si⁽⁶⁾―O―P⁽³⁾ linkage, and in the alkaline earth phosphosilicate glasses, the average was approximately 0.4–0.7. When the content of Si⁽⁶⁾ units reached its maximum, further increase in the SiO₂ content did not increase the Si⁽⁶⁾ content, and the surplus Si were present as Si⁽⁴⁾. Alkaline earth metal ions exhibit weaker stabilizing effects for Si⁽⁶⁾ species. Based on the results presented herein, we constructed sketches to illustrate the local structural organization of the glass. The relationships between the compositions and structures are important for glass composition and property design. It is important to improve the performance of phosphate glass by changing its composition, particularly for large laser device applications.