具有六重穿插非中心对称金刚石网络结构的Cd(Ⅱ)和Zn(Ⅱ)的配位高聚物(英)

利用1，4-二-(4-羧基吡啶基)丁烷(L)合成了两个新的三维配位聚合物{(CdL₂)·4H₂O·2ClO₄}_n 1和{(ZnL₂)·4H₂O·2ClO₄}_n 2。单晶X-射线结构分析表明，1和2具有相同的计量式，但其晶体属于不同的空间群(1属于P4n2，2属于P4₂22)。两种配合物中，每个金属离子分别由配体与四个相邻的金属离子连接，从而形成具有六重穿插的金刚石网络结构，其网络中大的空腔被高氯酸根离子和(H₂O)₄分子簇所占据。     

(4S)-4-羧基杂氮硅三环的合成

利用L-N,N-双(β-羟乙基)丝氨酸及L-N,N-双(β-羟乙基)苏氨酸与三乙氧基硅烷或氯烷基三乙氧基硅烷反应合成了具有手性的(4S)-4-羧基杂氮硅三环(1～5),并运用IR、~1HNMR、EI-MS等手段表征了结构。证据显示存在着贯穿笼状结构的N→Si配键。     

1-氨基环丙烷-1-羧酸的合成: 新型植物生长调节剂

本文报道了合成1-氨基环丙烷-1-羧酸的简便而价廉的方法,即乙酰乙酸乙酯法和α-氰乙酸乙酯法;并测定了产品的结构。     

光学活性配合物的合成、拆分和性能研究——Ⅲ.fac-、mer-〔Co(β-ala)3〕的手性固定相拆分和其对映体的异构化外消旋反应机理

本文用QAE-Sephadex-Sb_2(d-tart)_2~(2-)为手性交换固定相,50％乙醇水溶液为淋洗剂,在柱尺寸为80cm×2.2cm,淋洗速度为5.0ml/20min下完全拆分了1.0g fac-[Co(β-ala)_3];用同一手性固定相和淋洗剂在淋洗速度为1.2ml/20min下mer-[Co(β-ala)_3]的拆分量可增至0.78g。 fac-、mer-[Co(β-ala)_3]的四种对映体在1.56×10~(-2)M HClO_4介质和中性水溶液中的异构化外消旋反应的产物用Na~+型SP-Sephadex C-25柱分离后,用分光光度法和旋光仪测定了它们的浓度和旋光度。实验结果表明,这些对映体的异构化外消旋反应比较可能是按Werner首先提出的断键-分子内重排的机理进行。机理研究正在深入进行。     

二维网状铜(Ⅱ)配合物的合成及晶体结构表征

A Cu(Ⅱ) complex [Cu(L)_1.5(OSO₃)]·3H₂O (1) [L=1,4-bis(imidazol-1-yl)benzene] was synthesized by reaction of ligand L with CuSO₄·5H₂O using solvothermal method and its structure was determined by X-ray crystal structure analysis. The structure indicates that the complex crystallizes in triclinic, space group P1 with a=0.948 8(2), b=1.078 5(2), c=1.108 4(2) nm, α=74.820(2), β=81.331(2), γ=72.638(2)°, V=1.041 5(3) nm³, Z=2, D_calc=1.687 g·cm^-3, F(000)=544, μ=1.205 cm^-1, the final R=0.062 3 and wR=0.132 8. The Cu(Ⅱ) atom has distorted square-pyramidal environment with a N₃O₂ donor set. Each L ligand links two Cu(Ⅱ) atoms using its imidazole groups to form an infinite one-dimensional (1D) ladder-like chain, which further linked by SO₄^2- to form a two-dimensional (2D) network structure. The 2D sheets are further connected by C-H…O hydrogen bonds to give a three-dimensional (3D) structure. CCDC: 650388.     

Fe(110)面上CO化学吸附状态的吸附历史依赖关系

Fe(110)面上直接在室温时吸附的CO同先在170 K吸附然后升温到室温的CO吸附有所不同. 前者有解离而后者无解离; 另外, 前者的饱和吸附量比后者低. 这可以用前者发生了解离来解释. 根据以上结果, 提出了以下的设想, Fe(110)面上的CO解离除了需要足够的热能而外, 还需要在表面的吸附位上有邻近的其它未被覆盖Fe原子的存在, 即需要一定的表面结构.     

Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.     

氮杂冠醚与碱金属离子配位反应的研究

滴定量效法是研究反应热化学和热力学的重要手段之一．用这种方法对冠醚与金属离子的配位反应热力学性质进行研究一直受到很大关注【且S习．但是对氨杂冠林，尤其是一系列结构相似的氨杂冠醚体系进行系统的热力学性质研究的报导不多．前文K则曾报导了用自组装的消定量热计对银（I）－a吹体系和铜（11）·N，N’一问位取代革基乙二胺体系的配位反应热化学研究结果·本文报导从（对位取代革基）k杂15冠5卜RPW15CS，R＝CIZH；CHa；CHso）与碘化钠和碘化钾在25T、无水乙过溶液中进行配位反应的消定量效研究结果．讨论了配体上取代基的电…     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.