基于双核模型对Z = 116~ 121 超重核产生截面的研究(英文)

在双核模型的理论框架下系统研究了超重元素Z = 116 ~121 的蒸发剩余截面,计算过程中核子扩散由主方程描述,同时考虑了全熔合与准裂变的竞争。计算基本再现了利用热熔合反应48Ca+245Cm,48Ca+249Cf 和48Ca+249Bk 产生116~118 号同位素的合成截面。同样,分别以249Bk,249Cf 和243Am 为靶,以48Ca,50Ti 和58Fe 为炮弹,计算了Z = 119~ 121 号同位素的生成截面。结果表明,这些超重核的生成截面随着质子数的增大进一步变小。例如,利用58Fe+243Am 反应合成121 号同位素的最大蒸发剩余截面仅在fb 量级。基于对选择的几个反应系统的系统分析,发现双核系统在熔合蒸发过程中偶Z 奇N 和奇Z 偶N 复合核分别有强的3n 和4n 蒸发道。The production cross sections of superheavy elements with Z = 116~121 have been investigated systematically within the dinuclear system (DNS) concept, where the master equation is solved numerically to obtain the fusion probability. The competition between complete fusion and quasifission, which can strongly affect the cross section of the compound nucleus formation, is taken into account. The evaporation residue cross sections ER calculated for the hot fusion actinide-based reactions (48Ca+245Cm, 48Ca+249Cf and 48Ca+249Bk) are basically in agreement with the known experimental data within one order of magnitude. Similar calculations for the synthesis of superheavy elements up to Z = 121 are performed using the available 249Bk, 249Cf and 243Am as targets and 48Ca, 50Ti and 58Fe as projectiles. Their production cross sections are relatively small,especially for the 58Fe+243Am→301121 reaction. A systematic analysis indicates that the 3n and 4n channelsare respectively the most favorable fusion-evaporation channels in the synthesis of even- and odd-Z superheavy elements.     

Al掺杂四针状ZnO纳米结构的制备及其光致发光和场发射特性

采用热蒸发法成功制备了Al掺杂四针状ZnO纳米结构(T-AZO),利用扫描电子显微镜、X射线衍射仪、荧光光谱仪和场发射测试系统分别研究了不同Al摩尔分数对T-AZO纳米结构表面形貌、微结构、光致发光谱和场发射特性的影响。实验结果表明:T-AZO纳米结构呈现六角纤锌矿结构,Al掺杂对四针状ZnO纳米结构的形貌产生明显影响并且使紫外发射峰产生蓝移。实验中,当Al掺杂摩尔分数为3%时,场发射性能最好,其开启场强为1.33 V/μm,场增强因子为8 420。     

径向基无网格法在蒸发作用下一维排水问题中的应用

无网格方法是一种只需要节点信息而不需要划分网格的数值计算方法.利用径向基无网格法求解一维排水问题,导出了在地下水蒸发强度与埋深成线性关系时,一维不稳定流方程的无网格算法,通过迭代求其数值解.与常用的地下水位近似理论解、有限元解以及实测数据进行比较,均表明该算法误差小、收敛性好、实用性强,可以很好地应用于农田排水问题的计算.     

Determination of optical constants in DUV/VUV

An approach for determining the optical constants of the weakly absorbing substrate is developed and applied to obtain the parameters of CaF2 and fused silica substrates in deep ultraviolet （DUV） and vacuum ultraviolet （VUV） range. A method for extracting the optical constants of thin films deposited on strongly absorbing substrate, which is based on the reflectance spectra measured at different angles of incidence, is also presented. The optical constants are determined by fitting the measured spectra to the theoretical models. The proposed method is applied to determine the refractive index and extinction coefficient （n, k） of MgF2 film deposited on silicon substrate by electron beam evaporation with substrate temperature 300 ℃ and deposition rate 0.2 nm/s. The determined n, k values at 193 nm are 1.433 and 9.1×10-4, respectively.     

Influence of Different Substrates on Laser Induced Damage Thresholds at 1064nm of Ta2O5 Films

Ta2O5 films are prepared on Si, BK7, fused silica, antireflection （AR） and high reflector （HR） substrates by electron beam evaporation method, respectively. Both the optical property and laser induced damage thresholds （LIDTs） at 1064 nm of Ta2O5 films on different substrates are investigated before and after annealing at 673 K for 12 h. It is shown that annealing increases the refractive index and decreases the extinction index, and improves the O/Ta ratio of the Ta2O5 films from 2.42 to 2.50. Moreover, the results show that the LIDTs of the Ta2O5 films are mainly correlated with three parameters： substrate property, substoichiometry defect in the films and impurity defect at the interface between the substrate and the films. Details of the laser induced damage models in different cases are discussed.     

MgB2超导薄膜制备方法对比研究

文章结合MgB2超导薄膜在电子器件中的应用,简介了混合物理化学气相沉积法、脉冲激光沉积法、磁控溅射法、分子束外延法和电子束蒸发法等MgB2超导薄膜制备方法和研究进展,并对主要的MgB2超导薄膜制备方法进行了比较,提出了改进意见.对MgB2超导薄膜的应用前景作了展望.     

整齐排列的氧化锌纳米针阵列的场发射性能

采用简单的热蒸发方法,不使用任何催化剂,在硅基底上制备出了两种垂直于基底、整齐排列的氧化锌纳米针阵列.它们具有均匀的分布以及一致的取向和高度.场发射性能研究表明它们同时具有较低的开启和阈值场强,稳定的发射电流和长时间维持发射的能力.较低的开启和阈值场强来源于它们较高的长径比和较细的尖端;稳定发射电流和长时间维持发射的能力来源于它们在基底上均匀一致的分布以及由于较粗的根部带来的与基底的良好接触.实验结果表明整齐的氧化锌针状纳米结构阵列是一种理想的平面场发射材料. 关键词： 氧化锌 热蒸发 阵列场发射 屏蔽效应     

热蒸发YbF3薄膜的机械特性

 实验研究了热蒸发YbF₃薄膜在大气中的应力和附着力。利用Veeco干涉仪,测试了各种工艺条件下单层YbF₃薄膜的应力。结果发现:YbF₃薄膜的残余应力为张应力,热应力在残余应力中的比重较大;沉积方式对薄膜应力的影响不大;薄膜应力在大气中有一个释放的过程。热处理后,YbF₃薄膜应力增大。     

重离子反应中质子与中子转移对超重元素合成的影响

研究了采用类弹碎片质量数为变量的一维(1D)主方程(ME)描述重离子熔合反应时的受限制条件, 建立了以类弹碎片中子和质子数为独立变量的二维(2D) ME, 并采用分步差分格式法数值解(2D) ME得到了熔合几率。 新的方法适用于研究任何弹靶组合系统, 给出了与实验符合更好的结果, 为寻求合成超重核的反应道提供了更为宽阔的选择空间。 同时也研究了弹靶的不同同位旋组合对复合核形成截面的影响。 The limitation of the one dimensional master equation with the mass number of project like fragment as the variable is discussed. A two dimensional master equation with neutron and proton numbers of the project like fragment as variables is set up, and solved numerically by means of a two step difference scheme to obtain fusion probability. The new equation is suitable for studying fusion reactions with any projectile target combination, and can better fit the experimental data, so that it can provide a large probability to choose the reaction system for synthesizing a certain superheavy nucleus. The influence of projectile target combinations with different isospins on the cross sections of compound nuclei is studied.     

高效液相色谱-蒸发光散射检测法同时测定固态食品中6种稀有糖

稀有糖在固态食品中的应用量与日俱增，引发了掺假、过量添加等食品安全问题，因此建立固态食品中稀有糖(阿洛酮糖、塔格糖、海藻糖、异麦芽酮糖、赤藓糖醇和甘露糖醇)的检测方法十分重要。本文基于高效液相色谱-蒸发光散射检测器，建立了一种同时检测固态食品中6种稀有糖的分析方法。选用Zorbax Original NH₂色谱柱(250 mm×4.6 mm, 5μm)进行分离，流动相为乙腈-水(80∶20, v/v),流速梯度洗脱。蒸发光散射检测系统的漂移管温度设置为50℃,雾化器载气为高纯氮，载气流速为1.0 mL/min,压力为275.79 kPa,增益值为3。样品经25 mL水提取，振荡涡旋10 min,分别加入200μL的乙酸锌溶液和200μL的亚铁氰化钾溶液净化，4 500 r/min离心10 min,取上清液1 mL,过0.22μm水相滤膜，待上机分析。6种稀有糖在各自范围内线性关系良好，决定系数(R²)均>0.998 5,方法的检出限为0.02～0.60 g/100 g。以空白固态食品样品为基质，在3种加标水平下，6种稀有糖的回收率为92...