钍试剂Ⅱ及铍(Ⅱ)-钍试剂Ⅱ电化学行为的研究——Ⅰ.铍(Ⅱ)-钍试剂Ⅱ配合物吸附电流的研究和应用

本文研究了铍(Ⅱ)-钍试剂Ⅱ在EDTA、二苯胍、氨-铵缓冲溶液(pH9.5)中的电极行为和电流性质,并对有关机理进行了探讨。提出痕量铍的测定方法,线性范围为0.0005～0.1μg/ml。检出限为0.2ngBe(Ⅱ)/ Ml。用于煤飞灰中铍的直接测定,操作简单,结果满意。     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

溶剂对固相反应法制备H7PW12O42掺杂聚苯胺的影响

利用固相反应法,分别以微量的水和乙腈作为溶剂,制备了磷钨酸(H7PW12O42)掺杂聚苯胺,并以红外光谱(FTIR),电子扫描显微镜(SEM),X射线衍射(XRD),循环伏安(cyclic voltamogram)等测试方法对聚苯胺进行了表征。结果表明,固相反应法合成的聚苯胺分子链排列有序,晶化率较好,并且表现出有较好的电化学稳定性。而以微量的乙腈作为溶剂通过固相反应法得到的磷钨酸掺杂聚苯胺在颗粒形貌、结晶性、导电率等方面均优于相同条件微量的水作为溶剂时的掺杂聚苯胺。     

掺银的Sm0.5Sr0.5CoO3中温固体氧化物燃料电池复合阴极材料的制备与性能研究

采用硝酸盐分解方法在Sm0.5Sr0.5CoO3 (SSC)中掺入少量的银 (Ag), 形成可用于SOFC的多孔阴极材料 (SSC-Agx). 通过X射线衍射测试确定了材料的物相组成; 用SEM观测了中温电解质Ce0.8Sm0.2O1.9表面涂层电极的微结构; 利用电化学极化曲线和阻抗谱研究了这些材料中低温 (500～800 ℃)电化学性能, 确定掺Ag量和烧结温度对阴极电化学性能的影响. 结果表明, SSC在中温区掺20% Ag时具有最佳的电化学性能, 在600 ℃阴极总阻抗是SSC的1/11, 在750 ℃为SSC的1/4, SSC中掺Ag是提高阴极在中温区电化学性能的有效途径.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

抗癌药物的电化学研究(Ⅱ)道诺霉素在DNA修饰石墨粉末微电极上的电化学行为及分析应用

研究了道诺霉素 ( DNM)在石墨粉末微电极和 DNA修饰石墨粉末微电极上的电化学行为 ,并分析了产生差别的原因。在此基础上 ,提出了测定微量 DNM的方法 ,DNM浓度在 1 .0× 1 0 - 7～ 1 .0× 1 0 - 5mol/L之间其微分脉冲伏安 ( DPV)峰电流与浓度有良好的线性关系 ,检出限为 5 .0× 1 0 - 8mol/L。采用标准加入法测定了模拟样品中的 DNM,回收率在 94%～ 1 0 8%之间 ,结果令人满意     

配合物[Cu_2(TS)(H_2O)]·H_2O的自组装制备、晶体结构和电化学性质

利用单核配合物Na2 CuTS·H2 O在溶剂中的不稳定性质 ,自分解并重新组装得到了双核配合物 [Cu2 (TS)(H2 O) ]·H2 O .配合物为单斜晶系 ,空间群P2 1/C ,晶胞参数为a =0 .80 830 (16 )nm ,b =1.70 79(3)nm ,c =1.4 0 73(3)nm ,β =10 5 .0 8(3)° ,V =1.86 5 4 (6 )nm3 ,Z =4 ,最终一致性因子R =0 .0 6 4 4 .该分子结构为双核单元 ,金属原子通过两个酚氧原子桥联在一起 .结合晶体结构对配合物作了电化学研究     

上海科学家研制出新型电化学生物传感器

不久前，上海科学家根据DNA可以灵敏识别特定分子的原理研制出新型电化学生物传感器，该传感器能灵敏检测出细胞中的能量分子三磷酸腺苷（ATP）的含量，将来可能用这种方法便捷地判断食品的新鲜程度。