铜在HOPG上电沉积过程的现场ECSTM研究

用自制的电化学扫描隧道显微镜（ＥＣＳＴＭ）现场研究Ｃｕ在ＨＯＰＧ上的电沉积过程．结果表明Ｃｕ在ＨＯＰＧ上的电沉积为三维成核的过程．当电位较低或Ｃｕ２＋离子浓度较低时，铜在本体金属生长主要沿着台阶方向．过电位较高时，铜的成核数目增加，沉积层的晶粒有所细化．同时，非现场ＥＣＳＴＭ比较研究表明，ＳＴＭ针尖对针尖局部区域的电沉积起屏蔽作用，针尖所在区域Ｃｕ的沉积速度比其它区域明显减小     

焙烧对HZSM—5分子筛结构的影响

运用魔角自转固态核磁共振谱（ＭＡＳ－ＮＭＲ），研究了焙烧对ＨＺＳＭ－５分子筛结构的影响，结果表明，高温焙烧将引起ＨＺＳＭ－５分子筛骨架的脱铝，当焙烧温度从５００℃增加到７００℃时，ＨＺＳＭ－５的骨架Ｓｉ／Ａｌ比由１６．７增加至２２．７；而当焙烧温度由７００℃到８００℃时，骨架Ｓｉ／Ａｌ比则由２２．７增加到４８．５，Ａｌ－ＭＡＳＮＭＲ结果表明，从骨架上脱下来铝，部分地形成了ＮＭＲ不可见的无定形态，随     

米非司酮的吸附伏安特性

在ＰＨ７．０Ｂｒｉｔｔｏｎ－Ｒｏｂｉｎｓｏｎ缓冲溶液中，米非司酮（Ｍｉｆｅｐｒｉｓｔｏｎｅ，ＲＵ４８６）在汞电极上有２个不可逆的线性扫描还原峰，峰电位分别为－１．２３Ｖ和－１．６８Ｖ。本文探讨了第一峰的电化学行为。     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

由聚苯胺粒子组成的电流变液的研究

由经碱处理的掺杂态聚苯胺（ＰＡｎ）制得高介电常数的半导体ＰＡｎ粒子，将其悬浮于电绝缘油可组成电流变液，讨论了电流变（ＥＲ）液的静态屈服应力（τ＿ｓ），电流密度等性能与ＰＡｎ的介电常数（ε＿ｐ），导电率（σ），体积分数和应用电场强度的关系。对导电率相同的ＰＡｎ粒子，用氨水处理的ＰＡｎ粒子ε＿ｐ较用ＮａＯＨ液处理的高，前者在σ足够低如σ≤１．０×１０￣（－７）／ｃｍ时，ＥＲ液的τ＿ｓ随偶极系数的平方（β￣２）的增大而呈现非线性增加；后者ＥＲ液的τ＿ｓ随β￣２的增大出现一最大值．结果表明：由聚苯胺粒子可组成高电流变活性的无水ＥＲ液．     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

Preparation of Small Particle Sized ZnAl-Hydrotalcite-Like Compounds by Ultrasonic Crystallization

Ultrasonic technology has been intensively studied recently due to its special features. In this paper, an ultrasonic crystallization method was introduced for the preparation of ZnAl-Hydrotalcite-Like compounds (ZnAl-HTLcs). Samples with high crystallinity, small particle size and narrow particle size distribution were obtained and fully characterized using conventional techniques of XRD, FT-IR and TGDTA. The results prove that both ultrasonic frequency and ultrasonic power have effects on the sizes of the product particles. By varying the ultrasonic power from 250 W to 88 W, with the ultrasonic frequency fixed at 59 kHz, the median particle size of the samples increased from 0.37 μm to 0.82 μm. By altering the hydrothermal treatment time from 1 h to 5 h at 110℃, the median particle size of ZnAl-HTLcs synthesized via ultrasonic crystallization increased from 0.88 μm to 1.11 μm.     

硫酸氢钠催化合成己酸异戊酯的研究

己酸异戊酯是应用最广泛的食用香料之一。通常它是在硫酸催化下由己酸和异戊醇酯化反应而得[1] ,硫酸虽然活性高 ,价廉 ,但选择性差 ,产品质量不好 ,设备腐蚀严重 ,同时产生大量废液 ,污染环境。已发现对甲苯磺酸、磺酸树脂、固体超酸、杂多酸、氯化铁以及过渡金属硫酸盐等均可作为酯化反应的优良催化剂[2～ 7] 。本文探讨了硫酸氢钠催化羧酸的酯化反应 ,结果发现它具有良好的催化性能 ,且后处理方便 ,无污染。1　实验部分在装有分水器、温度计和回流冷凝器的四颈烧瓶中 ,加入一定量分析纯的己酸、异戊醇、甲苯和催化剂硫酸氢钠 (ＮａＨＳＯ…     

一种新型碳电极材料的制备及其电化学性质研究

进入21世纪，汽车也成为了主要的交通工具，随着带来的问题是废旧轮胎的增加，然而到目前为止还没有一种有效的方法回收利用这些废旧轮胎，目前的主要处理方法是将轮胎以垃圾形式进行填埋，然而轮胎是很难分解的，因此带来了严重的环境污染问题。目前我国在废旧轮胎回收上还存在技术比较落后，再生产品单一，同时每年全国仍有大量的废旧轮胎不能得以及时回收处理。到目前为止，还没有关于以轮胎粉制作电极材料的报导。合理利用废旧轮胎制备电极材料，既能有效解决黑色污染，又能制备出价值更大的电极材料，带来良好的经济效益。     

硅胶担载四核羰基钴催化剂的EXAFS和IR研究

本文以透射法EXAFS和IR等手段研究了四核羰基钴金属簇Co_4(CO)_(10)(PPh)_2担载在SiO_2上以后及用于烯烃醛化反应前后的变化,确定了相应的结构参数并探讨了催化活性与结构的关系。