Effect of the graphitic degree of carbon supports on the catalytic performance of ammonia synthesis over Ba-Ru-K/HSGC catalyst

A series of high surface area graphitic carbon materials （HSGCs） were prepared by ball-milling method. Effect of the graphitic degree of HSGCs on the catalytic performance of Ba-Ru-K/HSGC-x （x is the ball-milling time in hour） catalysts was studied using ammonia synthesis as a probe reaction. The graphitic degree and pore structure of HSGC-x supports could be successfully tuned via the variation of ball-milling time. Ru nanoparticles of different Ba-Ru-K/HSGC-x catalysts are homogeneously distributed on the supports with the particle sizes ranging from 1.6 to 2.0 nm. The graphitic degree of the support is closely related to its facile electron transfer capability and so plays an important role in improving the intrinsic catalytic performance of Ba-Ru-K/HSGC-x catalyst.     

Electrospun CuFe2O4 nanotubes as anodes for high-performance lithium-ion batteries

Herein,we report on the synthesis and lithium storage properties of electrospun one-dimensional(1D) CuFe_2O_4 nanomaterials.1D CuFe_2O_4nanotubes and nanorods were fabricated by a single spinneret electrospinning method followed by thermal decomposition for removal of polymers from the precursor fibers.The as-prepared CuFe_2O_4 nanotubes with wall thickness of ~50 nm presented diameters of ~150 nm and lengths up to several millimeters.It was found that phase separation between the electrospun composite materials occured during the electrospinning process,while the as-spun precursor nanofibers composed of polyacrylonitrile(PAN),polyvinylpyrrolidone(PVP) and metal salts might possess a core-shell structure(PAN as the core and PVP/metal salts composite as the shell) and then transformed to a hollow structure after calcination.Moreover,as a demonstration of the functional properties of the 1D nanostructure.CuFe_2O_4 nanotubes and nanorods were investigated as anodes for lithium ion batteries(LIBs).It was demonstrated that CuFe_2O_4 nanotubes not only delivered a high reversible capacity of ~816 mAh·g~(-1) at a current density of 200 mA·g~(-1)over 50 cycles,but also showed superior rate capability with respect to counterpart nanorods.Probably,the enhanced electrochemical performance can be attributed to its high specific surface areas as well as the unique hollow structure.     

Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming

The paper reports the development of cement clinker-supported nickel （with metal loadings of 5 wt%, 10 wt%, 15 wt% and 20 wt%） catalysts for glycerol dry （CO2） reforming reaction. XRF results showed that CaO constituted 62.0% of cement clinker. The physicochemical characterization of the catalysts revealed 32-folds increment of BET surface area （SBET） with the addition of nickel metal into the cement clinker, which was also corroborated by FESEM images. Significantly, XRD results suggested different types of Ni oxides formation with Ni loading, whilst Ca3SiO5 and Ca2Al0.67Mn0.33FeO5 were the main crystallite species for pure cement clinker. Temperature-programmed reduction analysis yielded three domains of H2 reduction peaks, viz. centered at approximately 750 K referred to as type-Ⅰ peaks, another peaks at 820 K denoted as type-Ⅱ peaks and the highest reduction peaks, type-Ⅲ recorded at above 1000 K. 20 wt% Ni was found to be the best loading with the highest XG and H2 yield, whilst the lowest methanation activity. Syngas with lower H2/CO ratios （0.6 to 1.5） were readily produced from glycerol dry reforming at CO2-to-Glycerol feed ratio （CGR） of unity. Nonetheless, carbon deposit comprised of whisker type （Cv） and graphitic-like type （Cc） species were found to be in majority on 20 wt%Ni/CC catalysts.     

磁性石墨烯对结晶紫的吸附性能研究

本文研究了磁性石墨烯对结晶紫的吸附特性,考察了pH、吸附剂用量、结晶紫浓度以及温度等对吸附平衡的影响。磁性石墨烯吸附结晶紫符合准二级动力学模型。不同温度下磁性石墨烯对结晶紫的吸附等温线满足Langmuir方程(R20.99)、Freundlich方程(R20.97)以及D-R模型(R20.96)。吸附热力学计算结果表明该吸附过程的△G0,并且随着温度升高△G越来越小,表明该吸附反应是自发进行的吸热反应。     

XMgO·YMg(OH)_2吸附剂除氟机理及其净化水的水质研究

研究了XMg O·YMg(OH)2对水中氟离子的吸附性能,考察了吸附时间、吸附剂用量、含氟水p H值、温度、含氟水初始浓度等因素对吸附的影响。实验结果表明,在较宽的p H(3.4~8.4)值和水温(22~51℃)范围内,XMg O·YMg(OH)2对水中氟离子具有极强的吸附能力,室温下0.4g XMg O·YMg(OH)2可将100m L浓度为30mg F-1·L-1含氟水处理为符合含氟标准的饮用水。氟离子在XMg O·YMg(OH)2上的吸附速率较大,30min内基本达到吸附平衡,吸附平衡符合Langmuir方程,在50min内达到饱和吸附,室温下饱和吸附量为13.46mg·g-1。净化水呈微碱性,含有5.68~15.07mg·L-1Mg2+,有益于人体健康。吸附饱和后的XMg O·YMg(OH)2经焙烧再生,除氟率可达81%。     

新型联苯基三苯胺聚合物的合成与性能研究

以4,4'-二溴联苯和苯胺为原料,经钯催化氨基化反应制得N,N'-二苯基联苯胺(1);以1为单体,分别与对二溴苯(2a),4,4'-二溴二苯砜(2b)和4,4'-二溴二苯甲酮(2c)通过钯催化的C-N交叉偶联反应,合成了3个新型的联苯基三苯胺聚合物:联苯基三苯胺苯(3a,收率88%),联苯基三苯胺砜(3b,收率94%)和联苯基三苯胺酮(3c,收率91%),其结构经1H NMR,IR和XRD表征。采用UV-Vis,TG,DSC,荧光光谱和循环伏安法对3a~3c的性能进行了研究。结果表明:3a~3c失重5%的温度分别为479℃,482℃和355℃;玻璃化转变温度分别为199℃,248℃和215℃;λmax分别位于354 nm,359 nm和385 nm;λem分别为489 nm,472 nm和518 nm;EHOMO值分别为-3.96 eV,-3.89 eV,-3.94 eV;ELUMO值分别为-1.16 eV,-1.17 eV和-1.39 eV。     

科学家模仿天然珍珠质结构制造新型陶瓷材料

<正>《自然-材料学》报道一种制造简便、强度硬度高的陶瓷材料,这种陶瓷材料可模拟天然珍珠质(包在珍珠外层的一种坚硬物质)的实体结构。这种陶瓷材料在600℃高温时仍可保持其性质,可应用于能源相关和运输安全相关的结构材料。陶瓷属于易碎物质。为了增强韧性,可在其成分中添加变形后不会发生断裂的聚合物和金属。但     

新型硼-二吡咯亚甲基染料衍生物的合成及其光学性质

以无水乙醇为溶剂,1-硝基环己烯与异氰基乙酸乙酯在K2CO3催化下经Barton-Zard反应制得2-乙氧羰基-3,4-四亚甲基吡咯(3);用过量氢化铝锂高温还原3得2-甲基-3,4-四亚甲基吡咯(4);通过"一瓶三步骤"合成法,4与4-羟基-3-硝基苯甲醛在三氟乙酸催化下经缩合反应后,用2,3-二氯-5,6-二氰基-1,4-苯醌氧化并依次用NEt3和BF3·OEt2处理合成了一种新型的含稠合外环的中位取代4-羟基-3-硝基苯基亚单元的BDP类染料衍生物(7),其结构经1H NMR和元素分析表征。光学性质研究结果表明,7在氯仿中的最大吸收峰位于525 nm,496 nm和390 nm;7的吸收光谱特征与溶液pH无关,但其发射光谱在强极性溶剂中表现出较强的碱性依赖性,可作为碱性条件下的pH荧光探针;7与OH-以1∶1结合的结合常数Ks为1 579 L·mol-1,酸度常数pKa约为10.80。     

NMR波谱仪集中优化管理模式

论述了核磁中心采用的相对集中管理模式.集中管理模式主要体现在上样辅助、中央供气、数据集中上传与下载3个方面.另外,还提出了未来可以从集中供高纯N2和LN22个方面进一步改善中心的集中管理模式,从而能够更好的优化测试效率和工作环境.     

改性活性炭对土壤镉的吸附性影响

目的研究3种改性活性炭对菜地、河流底泥、荷花底泥镉吸附性的影响。方法对活性炭进行酸改性、碱改性和氧化改性,采用双硫腙分光光度法测定镉含量。结果对实验土样,最佳活性炭添加量为0.025 g/g。随着初始镉含量的升高,土壤对镉的吸附量不断增大。结论 3种改性活性炭相比普通活性炭对湿地土壤的镉吸附量均有不同程度的提升,荷花底泥中,酸性、氧化改性活性炭相比普通活性炭,吸附效果提高7.7%,8.3%,吸附效果提升显著。